Ultrafast-Laser-Inscribed Type-II Waveguides in IG2: Self-Organized Morphology and Waveguiding Properties

W. Hu,M. Kilinc,W. Gebremichael,C. Dorrer,J. Qiao

DOI: https://doi.org/10.1364/cleo_at.2022.am4i.6

2022-01-01

Abstract:We report the ultrafast-laser inscription of type-II waveguides in the IG2 chalcogenide glass, focusing on the self-organized morphology within the tracks and the waveguiding properties over a large range of writing parameters.

What problem does this paper attempt to address?

Ultrafast-Laser-Inscribed Type-II Waveguides in IG2 for Mid-Infrared Applications

W. Hu,M. Kilinc,W. Gebremichael,C. Dorrer,J. Qiao

DOI: https://doi.org/10.1364/assl.2022.ath2a.4

2022-01-01

Abstract:We report the ultrafast-laser inscription of type-II waveguides in the IG2 chalcogenide glass. The mid-infrared waveguiding properties are studied for various pulse energies and separations between the two written tracks, with a negligible loss demonstrated.
Morphology and waveguiding properties of ultrafast-laser-inscribed type-II waveguides in IG2

W. Hu,M. Kilinc,W. Gebremichael,C. Dorrer,J. Qiao

DOI: https://doi.org/10.1364/OME.447213

2022-01-01

Optical Materials Express

Abstract:Ultrafast-laser-inscribed type-II waveguides inside the chalcogenide glass IG2 and the morphology of the inscribed tracks are presented for the first time to our knowledge. Selforganized periodic structures induced by the ultrafast laser in the tracks are characterized. The near-infrared waveguiding properties are studied for various pulse energies, durations, repetition rates, and polarization states, as well as different separations between the two written tracks. A propagation loss of similar to 2.3 dB/cm is demonstrated in a type-II waveguide formed in IG2. (C) 2021 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement
Single-scan Ultrafast Laser Inscription of Waveguides in IG2 for Type-I and Type-Ii Operation in the Mid-Infrared.

W. Hu,W. Gebremichael,J. Fernandes,M. Kilinc,C. Dorrer,J. Qiao

DOI: https://doi.org/10.1364/oe.486856

IF: 3.8

2023-01-01

Optics Express

Abstract:We demonstrate, for the first time to our knowledge, single-scan ultrafast laser inscription and performance of mid-infrared waveguiding in IG2 chalcogenide glass in the type-I and type-II configurations. The waveguiding properties at 4550 nm are studied as a function of pulse energy, repetition rate, and additionally separation between the two inscribed tracks for type-II waveguides. Propagation losses of similar to 1.2 dB/cm in a type-II waveguide and similar to 2.1 dB/cm in a type-I waveguide have been demonstrated. For the latter type, there is an inverse relation between the refractive index contrast and the deposited surface energy density. Notably, type-I and type-II waveguiding have been observed at 4550 nm within and between the tracks of two-track structures. In addition, although type-II waveguiding has been observed in the near infrared (1064 nm) and mid infrared (4550 nm) in two-track structures, type-I waveguiding within each track has only been observed in the mid infrared. (c) 2023 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement
Mid-Infrared Waveguides and Beamsplitters Inside IG2 Inscribed by a Femtosecond Laser

Wendwesen Gebremichael,Derek Oliwa,Wei Hu,Christophe Dorrer,Jie Qiao

DOI: https://doi.org/10.1364/cleo_at.2023.am2r.5

2023-01-01

Abstract:We report the ultrafast laser inscription of waveguides inside the chalcogenide glass IG2 for mid-infrared operation. A 1×4 beamsplitter with excellent splitting-ratio uniformity is demonstrated at 4.55-µm.
Ultrafast-Laser-Inscribed Type-I Waveguides and Beamsplitters Inside IG2 for Mid-IR Astrophotonics

W. Gebremichael,D. Oliwa,W. Hu,C. Dorrer,J. Qiao

DOI: https://doi.org/10.1117/12.2650696

2022-01-01

Abstract:We present a 1 × 4 beamsplitter that is for the first time inscribed inside IG2 material by an ultrafast laser, and a comprehensive study of inscription parameters’ effect on the performance of Type-I IG2 waveguides.
Ultrafast Laser Inscription of High Performance Mid-Infrared Waveguides in Chalcogenide Glass

Pascal Masselin,Eugène Bychkov,David Le Coq

DOI: https://doi.org/10.1109/LPT.2018.2878288

2019-08-09

Abstract:We present the realization of mid-infrared waveguide by ultrafast laser inscription technique in a chalcogenide glass. Our approach is based on multicore waveguide that consists in an alignment on a mesh of positive refractive index channels placed parallel to each other. Two different meshes are investigated with different refractive index contrasts between the channel and the glass matrix. A detailed analysis of the performances at a wavelength of 4.5 $\mu$m shows propagation losses of 0.20 $\pm$ 0.05 dB/cm and coupling efficiencies higher than 60 %.

Optics,Applied Physics
Ultrafast-laser-inscribed multiscan type-I mid-infrared waveguides and beamsplitters in IG2

Wendwesen Gebremichael,Derek Oliwa,John Fernandes,Christophe Dorrer,Jie Qiao

DOI: https://doi.org/10.1364/oe.515347

IF: 3.8

2024-02-22

Optics Express

Abstract:Wendwesen Gebremichael, Derek Oliwa, John Fernandes, Christophe Dorrer, Jie Qiao This study reports the fabrication and characterization of various configurations of mid-infrared waveguides and beamsplitters within the ... [Opt. Express 32, 8042-8058 (2024)]

optics
Fabrication and characterization of femtosecond laser written waveguides in chalcogenide glass

M. Hughes,W. Yang,D. Hewak

DOI: https://doi.org/10.1063/1.2718486

2021-10-20

Abstract:The authors describe the fabrication of buried waveguides in a highly nonlinear chalcogenide glass, gallium lanthanum sulfide, using focused femtosecond laser pulses. Through optical characterization of the waveguides, they have proposed a formation mechanism and provide comparisons to previous work. Tunneling has been identified as the dominant nonlinear absorption mechanism in the formation of the waveguides. Single mode guidance at 633 nm has been demonstrated. The writing parameters for the minimum propagation loss of 1.47 dB/cm are 0.36 uJ pulse energy and 50 um/s scanning speed.

Materials Science,Optics
High-performance femtosecond-laser microfabricated lattice-like-cladding waveguides in Er 3+ and MgO co-doped LiNbO 3 crystals for multi-wavelength guidance and luminescence

Jinman Lv,Ge Li,Yumeng Duan,Xinzhi Zheng,Yujie Ma,Feng Chen

DOI: https://doi.org/10.1016/j.rinp.2024.107776

IF: 4.565

2024-05-22

Results in Physics

Abstract:We report on microfabrication of the straight and S-shaped waveguides with lattice-like-cladding structures in Er 3+ and MgO co-doped LiNbO 3 by femtosecond laser writing. The waveguides with so-called Type II geometry support fundamental-mode propagation of light at near-infrared wavelength of 1550 nm and mid-infrared wavelength of 4 μm, which was experimentally and numerically investigated. In addition, it has been found that the guidance is only along the perpendicular (i.e., TE) polarization, which can be produced through controlling the femtosecond laser's parameters and direction. The green up-conversion at 550 nm under 4 S 3/2 → 4 I 15/2 transitions as well as the near-infrared luminescence at 1530 nm under 4 I 13/2 → 4 I 15/2 transition have been realized in the waveguides, and the resulting up-conversion luminescence efficiency was higher than Type I waveguides, which proved the Type II WGs can preserve and inspire the properties of the materials.

physics, multidisciplinary,materials science
Femtosecond laser direct written waveguides and laser induced-effects in erbium-doped GYSGG crystals

Qiang Liu,Min Geng,Zhang Zhenrong,Jianrong Qiu,Yu Yongze,Qiuqun Chen

DOI: https://doi.org/10.1364/ome.385278

2020-01-01

Optical Materials Express

Abstract:We report an investigation of waveguide inscription by femtosecond laser direct writing in two newly developed mid-infrared laser garnets. Usable guiding structures are obtained in one of these garnets but not in the other. This difference is mainly attributed to stimulated radiation, which is more intense in the latter garnet so that less absorbed energy of writing laser is involved in the process of waveguide creation. The mechanism for laser modification is ascribed to garnet intrinsic defects creation and crystalline lattices distortions. Their associated refractive index changes and stress field are essential conditions for waveguide formation. (C) 2020 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
Optical Waveguides Induced in Inorganic Glasses by a Femtosecond Laser

K Miura,H Inouye,JR Qiu,T Mitsuyu,K Hirao

DOI: https://doi.org/10.1016/s0168-583x(98)00197-9

IF: 1.279

1998-01-01

Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms

Abstract:In an attempt to write optical waveguides in bulk glasses, photo-induced refractive index changes were continuously produced by focusing an ultra-short laser pulse through a microscope objective and translating the sample parallel to the axis of the laser beam. The resulting linear refractive index changes were written inside the bulk glasses along the path traversed by the focal point of the laser. From field intensity distributions in the output of guided light for these waveguides, we demonstrated that permanent optical waveguides could be successfully formed in various types of glass. In addition, through analyzing the near-field pattern with a CCD camera, we confirmed that single mode waveguides of the graded index type could be formed by a writing technique using an ultra-short laser pulse.
Transparent Ho,Yb:YAG crystal waveguide inscribed by direct femtosecond laser writing

Chuan-Lei Jia,Wei-Jia Tang,Ke Liu,Yang Liao

DOI: https://doi.org/10.1016/j.optmat.2022.113314

IF: 3.754

2022-12-08

Optical Materials

Abstract:We report on the dual-line waveguides in Ho,Yb:YAG crystal inscribed by femtosecond laser writing. The efficient single-mode guidance is demonstrated in the type II waveguide structures at 632.8 nm. The confocal micro-Raman spectroscopy is utilized to characterize both the lattice-damaged tracks and strain-affected regions. Contributions of the refractive index changes from the two main lattice changes are further discussed in combination with beam propagation calculations. The micro-luminescence has been studied, demonstrating that the fluorescence of Ho 3+ and Yb 3+ ions is well preserved in Ho,Yb:YAG waveguide.

materials science, multidisciplinary,optics
Direct Writing of Channel Optical Waveguides in Er 3+ -Doped Aluminosilicate Glass by Low Repetition Rate Femtosecond Laser

Jing Bai,Xue-Wen Long,Wei-qiang Wang,Peng Xie,Wei Zhao

DOI: https://doi.org/10.1021/acsaelm.2c00520

IF: 4.494

2022-06-09

ACS Applied Electronic Materials

Abstract:The symmetrical optical waveguide structures are fabricated in Er3+-doped aluminosilicate glass using 800 nm femtosecond laser writing in kHz repetition frequency regime. The impact of writing parameters on the waveguide preparation with a 10× microscope objective in the longitudinal writing scheme was studied in detail. The experimental results show that, under a fixed pulse energy value of 20 μJ, the waveguides can be realized with the scan speed from 20 to 160 μm/s, and with a fixed scan speed value of 160 μm/s, the waveguide can be prepared under an inscription energy range of 5–30 μJ, indicating that the waveguide can be realized in a wide range of writing parameters. The near-field mode intensity image shows that the waveguide region possesses excellent light guiding properties. Based on the refractive index profile reconstruction method, the maximum refractive index increase in the waveguide region is estimated to be about 5.5 × 10–4. The lowest propagation loss of the waveguide was measured to be about 1.51 dB/cm by the waveguide side scattering method. The microfluorescence spectra show that the gain characteristics of the waveguide region are well maintained after laser processing. This work shows that the fabrication of embedded optical waveguides using ultrashort pulse laser in Er3+-doped aluminosilicate glass has strong feasibility and great potential to create active gain devices in the field of integrated photonics and all-optical communication.

materials science, multidisciplinary,engineering, electrical & electronic
3D Laser Writing of Low‐Loss Cross‐Section‐Variable Type‐I Optical Waveguide Passive/Active Integrated Devices in Single Crystals

Daoyuan Chen,Zhi Chen,Yi Yang,Yuying Wang,Xuhu Han,Kuen Yao Lau,Zhemin Wu,Chen Zou,Yu Zhang,Beibei Xu,Xiaofeng Liu,Zhijun Ma,Guoping Dong,Giuseppe Barillaro,Lijing Zhong,Jianrong Qiu

DOI: https://doi.org/10.1002/adma.202404493

IF: 29.4

2024-05-10

Advanced Materials

Abstract:Optical waveguides fabricated in single crystals offer crucial passive/active optical components for photonic integrated circuits. Single crystals possess inherent advantages over their amorphous counterpart, such as lower optical losses in visible‐to‐mid‐infrared band, larger peak emission cross‐section, higher doping concentration. However, the writing of Type‐I positive refractive index modified waveguides in single crystals using femtosecond laser technology presents significant challenges. Herein, we introduce a novel femtosecond laser direct writing technique that combines slit‐shaping with an immersion oil objective to fabricate low‐loss Type‐I waveguides in single crystals. This approach allows for precise control of waveguide shape, size, mode‐field and refractive index distribution, with a spatial resolution as high as 700 nm and a high positive refractive index variation on the order of 10−2, introducing new degrees of freedom to design and fabricate passive/active optical waveguide devices. As a proof‐of‐concept, we successfully produced a 7 mm‐long circular‐shaped gain waveguide (∼10 μm in diameter) in an Er3+‐doped YAG single crystal, exhibiting a propagation loss as low as 0.23 dB/cm, a net gain of ∼3 dB and a polarization‐insensitive character. The newly‐developed technique is theoretically applicable to arbitrary single crystals, holding promising potential for various applications in integrated optics, optical communication, and photonic quantum circuits. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,nanoscience & nanotechnology,physics, applied,chemistry, physical, condensed matter
Ultrafast-Laser-Induced Tailoring of Crystal-in-Glass Waveguides by Precision Partial Remelting

Alexey S. Lipatiev,Sergey V. Lotarev,Tatiana O. Lipateva,Sergey S. Fedotov,Elena V. Lopatina,Vladimir N. Sigaev

DOI: https://doi.org/10.3390/mi14040801

IF: 3.4

2023-04-01

Micromachines

Abstract:Space-selective laser-induced crystallization of glass enables direct femtosecond laser writing of crystal-in-glass channel waveguides having nearly single-crystal structure and consisting of functional phases with favorable nonlinear optical or electrooptical properties. They are regarded as promising components for novel integrated optical circuits. However, femtosecond-laser-written continuous crystalline tracks typically have an asymmetric and strongly elongated cross-section, which causes a multimode character of light guiding and substantial coupling losses. Here, we investigated the conditions of partial remelting of laser-written LaBGeO5 crystalline tracks in lanthanum borogermanate glass by the same femtosecond laser beam which had been used for their writing. Exposure to femtosecond laser pulses at 200 kHz repetition rate provided cumulative heating of the sample in the vicinity of the beam waist sufficient to provide space-selective melting of crystalline LaBGeO5. To form a smoother temperature field, the beam waist was moved along the helical or flat sinusoidal path along the track. The sinusoidal path was shown to be favorable for tailoring the improved cross-section of the crystalline lines by partial remelting. At optimized laser processing parameters, most of the track was vitrified, and the residual part of the crystalline cross-section had an aspect ratio of about 1:1. Thermal-induced stress emerging during the tailoring procedure was efficiently eliminated by fine post-annealing. The proposed technique suggests a new way to control the morphology of laser-written crystal-in-glass waveguides by tailoring their cross-section, which is expected to improve the mode structure of the guided light.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
Femtosecond laser direct writing quasi-phase matched type-II waveguide in lithium niobate

Tingge Yuan,Bing Zhu,Honghuan Tu,Yuping Chen,Xianfeng Chen

DOI: https://doi.org/10.1364/OME.477618

2022-12-06

Optical Materials Express

Abstract:Tingge Yuan, Bing Zhu, Honghuan Tu, Yuping Chen, Xianfeng Chen In this paper, we demonstrate a quasi-phase matched type-II waveguide fabricated by femtosecond laser direct writing in Z-cut MgO doped ... [Opt. Mater. Express 13, 1-8 (2023)]

materials science, multidisciplinary,optics
Photowritten Optical Waveguides in Various Glasses with Ultrashort Pulse Laser

K Miura,JR Qiu,H Inouye,T Mitsuyu,K Hirao

DOI: https://doi.org/10.1063/1.120327

IF: 4

1997-01-01

Applied Physics Letters

Abstract:We show that permanent optical waveguides can be formed in various bulk glasses by photoinduced refractive index change with an ultrashort pulse laser. The waveguides were fabricated by focusing the laser beam through an microscope objective and translating the sample parallel to the axis of the laser beam. From the observations of intensity distributions in the output of guided light by a CCD camera, we demonstrated that permanent optical waveguides can be successfully formed in various glasses. In addition, from the analysis of a near-field pattern, it was confirmed that single mode waveguides of the graded index type can be formed by a writing technique using the ultrashort pulse laser.
Two Layers of Buried Optical Waveguides in Glass Substrate by Ion Exchange

Yinlei Hao,Hongjian Wang,Bin Zheng,Yubo Li,Jianyi Yang,Xiaoqing Jiang,Qiang Zhou,Minghua Wang

DOI: https://doi.org/10.1117/1.oe.51.4.044603

IF: 1.3

2012-01-01

Optical Engineering

Abstract:Two layers of buried optical waveguides are manufactured in silicate glass substrate. Using ion-exchange process, this procedure is composed of two successive cycles of buried waveguide fabrication. Characterizations of these waveguides show that the two layers have similar dimensions for both waveguide core and for mode field, and thus similar optical properties. Loss analysis indicates that coupling loss of top and bottom layer waveguide with single-mode-fiber being 0.80 dB/facet and 0.75 dB/facet, respectively. (C) 2012 Society of Photo-Optical Instrumentation Engineers (SPIE). [DOI: 10.1117/1.OE.51.4.044603]
Nonlinear waveguides by femtosecond laser writing of lithium triborate crystals

Bin Zhang,Ziqi Li,Lingqi Li,Lei Wang,Feng Chen,Qing-Ming Lu

DOI: https://doi.org/10.1088/2040-8986/ac764e

IF: 2.1

2022-06-08

Journal of Optics

Abstract:Nonlinear optical waveguides play a crucial role in the wavelength/frequency conversion of light. Femtosecond laser direct writing is an efficient and flexible technique to produce waveguides in dielectrics. We report on the nonlinear waveguides in LiB3O5 crystals by femtosecond laser writing. The double-line and depressed-cladding structures inscribed by femtosecond laser pulses show excellent guiding properties at 405 nm or 810 nm for both TE and TM polarized light. The investigations of the confocal micro-Raman spectroscopy have indicated that lattice structures in waveguide cores remain almost unchanged compared with those of the bulk. Based on type-I phase matching condition, both second harmonic generation of 810 nm and spontaneous parametric down conversion of 405 nm have been obtained in the laser-written LBO waveguides, suggesting potential applications in integrated nonlinear optics and quantum photonics.

optics
Femtosecond laser inscription of nonlinear photonic circuits in Gallium Lanthanum Sulphide glass

María Ramos Vázquez,Belén Sotillo,Stefano Rampini,Vibhav Bharadwaj,Behrad Gholipour,Paloma Fernández,Roberta Ramponi,Cesare Soci,Shane M. Eaton

DOI: https://doi.org/10.1088/2515-7647/aade60

2018-08-27

Abstract:We report on femtosecond laser writing of single mode optical waveguides in chalcogenide Gallium Lanthanum Sulphide (GLS) glass. A multiscan fabrication process was employed to create waveguides with symmetric single mode guidance and low insertion losses at 800 nm wavelength, compatible with Ti:Sapphire ultrafast lasers. {\mu}Raman and X-Ray microanalysis were used to elucidate the origin of the laser-induced refractive index change in GLS. Nonlinear refractive index measurements of the waveguides were performed by finding the optical switching parameters of a directional coupler, demonstrating that the nonlinear properties were preserved, evidencing that GLS is a promising platform for laser-written integrated nonlinear photonics.

Optics

Ultrafast-Laser-Inscribed Type-II Waveguides in IG2: Self-Organized Morphology and Waveguiding Properties

Ultrafast-Laser-Inscribed Type-II Waveguides in IG2 for Mid-Infrared Applications

Morphology and waveguiding properties of ultrafast-laser-inscribed type-II waveguides in IG2

Single-scan Ultrafast Laser Inscription of Waveguides in IG2 for Type-I and Type-Ii Operation in the Mid-Infrared.

Mid-Infrared Waveguides and Beamsplitters Inside IG2 Inscribed by a Femtosecond Laser

Ultrafast-Laser-Inscribed Type-I Waveguides and Beamsplitters Inside IG2 for Mid-IR Astrophotonics

Ultrafast Laser Inscription of High Performance Mid-Infrared Waveguides in Chalcogenide Glass

Ultrafast-laser-inscribed multiscan type-I mid-infrared waveguides and beamsplitters in IG2

Fabrication and characterization of femtosecond laser written waveguides in chalcogenide glass

High-performance femtosecond-laser microfabricated lattice-like-cladding waveguides in Er 3+ and MgO co-doped LiNbO 3 crystals for multi-wavelength guidance and luminescence

Femtosecond laser direct written waveguides and laser induced-effects in erbium-doped GYSGG crystals

Optical Waveguides Induced in Inorganic Glasses by a Femtosecond Laser

Transparent Ho,Yb:YAG crystal waveguide inscribed by direct femtosecond laser writing

Direct Writing of Channel Optical Waveguides in Er 3+ -Doped Aluminosilicate Glass by Low Repetition Rate Femtosecond Laser

3D Laser Writing of Low‐Loss Cross‐Section‐Variable Type‐I Optical Waveguide Passive/Active Integrated Devices in Single Crystals

Ultrafast-Laser-Induced Tailoring of Crystal-in-Glass Waveguides by Precision Partial Remelting

Femtosecond laser direct writing quasi-phase matched type-II waveguide in lithium niobate

Photowritten Optical Waveguides in Various Glasses with Ultrashort Pulse Laser

Two Layers of Buried Optical Waveguides in Glass Substrate by Ion Exchange

Nonlinear waveguides by femtosecond laser writing of lithium triborate crystals

Femtosecond laser inscription of nonlinear photonic circuits in Gallium Lanthanum Sulphide glass