Ultrafast-Laser-Inscribed Type-I Waveguides and Beamsplitters Inside IG2 for Mid-IR Astrophotonics

W. Gebremichael,D. Oliwa,W. Hu,C. Dorrer,J. Qiao

DOI: https://doi.org/10.1117/12.2650696

2022-01-01

Abstract:We present a 1 × 4 beamsplitter that is for the first time inscribed inside IG2 material by an ultrafast laser, and a comprehensive study of inscription parameters’ effect on the performance of Type-I IG2 waveguides.

What problem does this paper attempt to address?

Ultrafast-laser-inscribed multiscan type-I mid-infrared waveguides and beamsplitters in IG2

Wendwesen Gebremichael,Derek Oliwa,John Fernandes,Christophe Dorrer,Jie Qiao

DOI: https://doi.org/10.1364/oe.515347

IF: 3.8

2024-02-22

Optics Express

Abstract:Wendwesen Gebremichael, Derek Oliwa, John Fernandes, Christophe Dorrer, Jie Qiao This study reports the fabrication and characterization of various configurations of mid-infrared waveguides and beamsplitters within the ... [Opt. Express 32, 8042-8058 (2024)]

optics
Mid-Infrared Waveguides and Beamsplitters Inside IG2 Inscribed by a Femtosecond Laser

Wendwesen Gebremichael,Derek Oliwa,Wei Hu,Christophe Dorrer,Jie Qiao

DOI: https://doi.org/10.1364/cleo_at.2023.am2r.5

2023-01-01

Abstract:We report the ultrafast laser inscription of waveguides inside the chalcogenide glass IG2 for mid-infrared operation. A 1×4 beamsplitter with excellent splitting-ratio uniformity is demonstrated at 4.55-µm.
Ultrafast-Laser-Inscribed Type-II Waveguides in IG2 for Mid-Infrared Applications

W. Hu,M. Kilinc,W. Gebremichael,C. Dorrer,J. Qiao

DOI: https://doi.org/10.1364/assl.2022.ath2a.4

2022-01-01

Abstract:We report the ultrafast-laser inscription of type-II waveguides in the IG2 chalcogenide glass. The mid-infrared waveguiding properties are studied for various pulse energies and separations between the two written tracks, with a negligible loss demonstrated.
Single-scan Ultrafast Laser Inscription of Waveguides in IG2 for Type-I and Type-Ii Operation in the Mid-Infrared.

W. Hu,W. Gebremichael,J. Fernandes,M. Kilinc,C. Dorrer,J. Qiao

DOI: https://doi.org/10.1364/oe.486856

IF: 3.8

2023-01-01

Optics Express

Abstract:We demonstrate, for the first time to our knowledge, single-scan ultrafast laser inscription and performance of mid-infrared waveguiding in IG2 chalcogenide glass in the type-I and type-II configurations. The waveguiding properties at 4550 nm are studied as a function of pulse energy, repetition rate, and additionally separation between the two inscribed tracks for type-II waveguides. Propagation losses of similar to 1.2 dB/cm in a type-II waveguide and similar to 2.1 dB/cm in a type-I waveguide have been demonstrated. For the latter type, there is an inverse relation between the refractive index contrast and the deposited surface energy density. Notably, type-I and type-II waveguiding have been observed at 4550 nm within and between the tracks of two-track structures. In addition, although type-II waveguiding has been observed in the near infrared (1064 nm) and mid infrared (4550 nm) in two-track structures, type-I waveguiding within each track has only been observed in the mid infrared. (c) 2023 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement
Ultrafast-Laser-Inscribed Type-II Waveguides in IG2: Self-Organized Morphology and Waveguiding Properties

W. Hu,M. Kilinc,W. Gebremichael,C. Dorrer,J. Qiao

DOI: https://doi.org/10.1364/cleo_at.2022.am4i.6

2022-01-01

Abstract:We report the ultrafast-laser inscription of type-II waveguides in the IG2 chalcogenide glass, focusing on the self-organized morphology within the tracks and the waveguiding properties over a large range of writing parameters.
Compact 1 X 3 Waveguide Beam Splitters with Variable Splitting Ratios in LiNbO3 Crystal Fabricated by Femtosecond Laser Direct Writing

Menghan Yu,Siwen Ai,Yuanliu Chen,Feng Chen,Hongliang Liu

DOI: https://doi.org/10.3788/col202422.090008

IF: 2.56

2024-01-01

Chinese Optics Letters

Abstract:In this Letter, waveguide beam splitters (1 x 3) with type I modifications are fabricated in a LiNbO3 crystal by femtosecond laser direct writing. The influence of the relative positions of three sub-waveguides on power splitting ratios are investigated in detail and the corresponding output intensities as functions of the relative positions in the numerical simulation are plotted, which are in good accordance with the experimental results. In addition, the waveguide beam splitter with a 1:1:1 splitting ratio is fabricated by changing the relative widths of the three branch-waveguides. Guiding performances at 532 nm are measured and analyzed by a typical end-face coupling system. The simulation and experimental results demonstrate that the beam splitting ratio of the waveguide splitter can be precisely regulated by the positions and widths of the sub-waveguides.
Morphology and waveguiding properties of ultrafast-laser-inscribed type-II waveguides in IG2

W. Hu,M. Kilinc,W. Gebremichael,C. Dorrer,J. Qiao

DOI: https://doi.org/10.1364/OME.447213

2022-01-01

Optical Materials Express

Abstract:Ultrafast-laser-inscribed type-II waveguides inside the chalcogenide glass IG2 and the morphology of the inscribed tracks are presented for the first time to our knowledge. Selforganized periodic structures induced by the ultrafast laser in the tracks are characterized. The near-infrared waveguiding properties are studied for various pulse energies, durations, repetition rates, and polarization states, as well as different separations between the two written tracks. A propagation loss of similar to 2.3 dB/cm is demonstrated in a type-II waveguide formed in IG2. (C) 2021 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement
DESIGN AND FABRICATION OF VISIBLE+1.54μm LASER/LONGWAVE INFRARED DICHROIC BEAMSPLITTER

Yue-Guang ZHANG,Ying WANG,Xue-Zheng SUN,Wei-Dong SHEN,Xu LIU,Pei-Fu GU

DOI: https://doi.org/10.3724/SP.J.1010.2009.00307

2009-01-01

JOURNAL OF INFRARED AND MILLIMETER WAVES

Abstract:Visible + 1.54 mu m laser/long-wave infrared dichroic beamsplitters, which separate the incident spectrum into visible light, laser and longwave infrared light, take an important role in multichannel imaging spectrum technique. The choice of substrates and coating materials was discussed. Then the coating design of reflecting the visible(400 similar to 800nm) and laser (1540nm) light while transmitting the longwave infrared( 8 similar to 12 mu m) spectrum was analysed, and the beamsplitter was manufactured by e-gun evaporation. The measured reflectivity and transmittance of the corresponding channel are all above 94% and the dichroic beanisplitters has been used in practical optical system successfully.
Ultrafast laser inscription of mid-IR directional couplers for stellar interferometry

Alexander Arriola,Sebabrata Mukherjee,Debaditya Choudhury,Lucas Labadie,Robert R. Thomson

DOI: https://doi.org/10.1364/OL.39.004820

2014-08-26

Abstract:We report the ultrafast laser fabrication and mid-IR characterization (3.39 microns) of four-port evanescent field directional couplers. The couplers were fabricated in a commercial gallium lanthanum sulphide glass substrate using sub-picosecond laser pulses of 1030 nm light. Straight waveguides inscribed using optimal fabrication parameters were found to exhibit propagation losses of 0.8 dB/cm. A series of couplers were inscribed with different interaction lengths, and we demonstrate power splitting ratios of between 8% and 99% for mid-IR light with a wavelength of 3.39 microns. These results clearly demonstrate that ultrafast laser inscription can be used to fabricate high quality evanescent field couplers for future applications in astronomical interferometry.

Instrumentation and Methods for Astrophysics,Optics
Silicon-on-Insulator Waveguide Devices for Broadband Mid-Infrared Photonics

Bowei Dong,Xin Guo,Chong Pei Ho,Bo Li,Hong Wang,Chengkuo Lee,Xianshu Luo,Guo-Qiang Lo

DOI: https://doi.org/10.1109/jphot.2017.2692039

IF: 2.4

2017-01-01

IEEE Photonics Journal

Abstract:In this paper, we demonstrate silicon-on-insulator (SOI) channel waveguides with propagation loss and $r$ = 10 $\mu$$\text{m}$ bends with bending loss as low as 2 dB/cm and 0.02 dB/90 $^{\circ }$ in the broad wavelength range of 3.68–3.88 $\mu$ $\text{m}$. We also indicate the limitation of SOI waveguide loss in mid-infrared wavelength by analyzing loss mechanisms. Based on this high-performance mid-infrared waveguide, we systematically analyze the coupling efficiency of various directional couplers, which are critical and commonly used building blocks for on-chip light routing and power splitting. By varying coupling length and sweeping wavelength, the performance of directional coupler with various gap separations is meticulously investigated in 3.68–3.88 $\mu$ $\text{m}$. A experimental database for directional coupler with any power splitting ratio is provided. Our results offer a promising broadband platform for dense wavelength division multiplexing (DWDM) and applications that require precise control of coupling such as racetrack resonator in the mid-infrared region.
Long-wave infrared 1 × 2 MMI based on air-gap beneath silicon rib waveguides.

Yuxin Wei,Guoyi Li,Yinlei Hao,Yubo Li,Jianyi Yang,Minghua Wang,Xiaoqing Jiang

DOI: https://doi.org/10.1364/OE.19.015803

IF: 3.8

2011-01-01

Optics Express

Abstract:The undercut long-wave infrared (LWIR) waveguide components with air-gap beneath are analyzed and fabricated on the Si-wafer with simple manufacturing process. A 1 x 2 multimode interference (MMI) splitter based on this structure is presented and measured under the 10.6 mu m wavelength experimental setup. The uniformity of the MMI fabricated is 0.76 dB. The relationship among the output power, slab thickness and air-gap width is also fully discussed. Furthermore, undercut straight waveguides based on SOI platform are fabricated for propagation loss evaluation. Ways to reduce the loss are discussed either. (C) 2011 Optical Society of America
Germanium-On-Silicon Nitride Waveguides for Mid-Infrared Integrated Photonics

Wei Li,P. Anantha,Shuyu Bao,Kwang Hong Lee,Xin Guo,Ting Hu,Lin Zhang,Hong Wang,Richard Soref,Chuan Seng Tan

DOI: https://doi.org/10.1063/1.4972183

IF: 4

2016-01-01

Applied Physics Letters

Abstract:A germanium-based platform with a large core-clad index contrast, germanium-on-silicon nitride waveguide, is demonstrated at mid-infrared wavelength. Simulations are performed to verify the feasibility of this structure. This structure is realized by first bonding a silicon-nitride-deposited germanium-on-silicon donor wafer onto a silicon substrate wafer, followed by the layer transfer approach to obtain germanium-on-silicon nitride structure, which is scalable to all wafer sizes. The misfit dislocations which initially form along the interface between germanium/silicon can be removed by chemical mechanical polishing after layer transfer process resulting in a high-quality germanium layer. At the mid-infrared wavelength of 3.8 μm, the germanium-on-silicon nitride waveguide has a propagation loss of 3.35 ± 0.5 dB/cm and a bend loss of 0.14 ± 0.01 dB/bend for a radius of 5 μm for the transverse-electric mode.
Mid-infrared Nonlinear Silicon Hybrid Waveguide with High Figure of Merit

Zhihua Tu,Qiang Jin,Xibin Li,Shiming Gao

DOI: https://doi.org/10.1364/josab.35.001772

2018-01-01

Abstract:Mid-infrared (MIR) integrated waveguides with strong local field enhancement and relatively low loss have shown their potential in nonlinear optical applications. We present a novel highly nonlinear silicon hybrid waveguide by setting an insulator-metal-insulator structure with [2-[4-(dimethylamino)phenyl]-3-([4-(dimethylamino)phenyl]ethynyl)buta-1,3-diene-1,1,4,4-tetracarbonitrile] (DDMEBT) and silver materials into the silicon slot. The mode field is strongly confined in the DDMEBT layers via the surface plasmon polariton effect. Two rectangular silicon nanobridges are used to further confine the optical field and reduce the loss simultaneously. The waveguide dimensions are optimized to obtain a figure of merit as high as 0.55 at 2.1 mu m and a zero-dispersion wavelength of 2.06 mu m. In a 6.6-mm-long waveguide, a maximum four-wave mixing efficiency of -6.65 dB and a bandwidth of 512 nm (1.894-2.406 mu m) can be simultaneously obtained, pumped by a 2.104-mu m source with a power of only 500 mW. Our designed waveguide exhibits excellent overall performance for nonlinear optical applications such as all-optical signal processing in the MIR band. (C) 2018 Optical Society of America
Ultrafast Laser Inscription of High Performance Mid-Infrared Waveguides in Chalcogenide Glass

Pascal Masselin,Eugène Bychkov,David Le Coq

DOI: https://doi.org/10.1109/LPT.2018.2878288

2019-08-09

Abstract:We present the realization of mid-infrared waveguide by ultrafast laser inscription technique in a chalcogenide glass. Our approach is based on multicore waveguide that consists in an alignment on a mesh of positive refractive index channels placed parallel to each other. Two different meshes are investigated with different refractive index contrasts between the channel and the glass matrix. A detailed analysis of the performances at a wavelength of 4.5 $\mu$m shows propagation losses of 0.20 $\pm$ 0.05 dB/cm and coupling efficiencies higher than 60 %.

Optics,Applied Physics
Development of a 3D ultrafast laser written near-infrared spectro-interferometer

G Martin,G Zhang,M Bonduelle,R Allaw,M Callejo,A Morand,A Rodenas,G Cheng,R Stoian,C d'Amico

DOI: https://doi.org/10.1364/OL.484270

2023-05-01

Abstract:Direct ultrafast laser photoinscription of transparent materials is a powerful technique for the development of embedded 3D photonics. This is particularly adaptable for astrophotonic devices when a number of inputs are required. The process relies essentially on volume fabrication of waveguiding structures in flexible 3D designs and refractive index contrast parameters adjustable for specific spectral ranges. This enables 3D geometry and thus avoids in-plane crossings of waveguides that can induce losses and cross talk in multi-telescope beam combiners. The additional novel capability of the technique allows for the fabrication of high aspect ratio nanostructures nonperturbatively sampling the optical field. Combining ultrafast laser micro- and nanoprocessing with engineered beams, we present here results for the development of chip-sized silica glass integrated robust 3D three-telescope beam combiners in the near-IR range, as well as embedded diffraction gratings, for phase closure analysis and spectro-interferometry applications in astronomy.
3D Laser Writing of Low‐Loss Cross‐Section‐Variable Type‐I Optical Waveguide Passive/Active Integrated Devices in Single Crystals

Daoyuan Chen,Zhi Chen,Yi Yang,Yuying Wang,Xuhu Han,Kuen Yao Lau,Zhemin Wu,Chen Zou,Yu Zhang,Beibei Xu,Xiaofeng Liu,Zhijun Ma,Guoping Dong,Giuseppe Barillaro,Lijing Zhong,Jianrong Qiu

DOI: https://doi.org/10.1002/adma.202404493

IF: 29.4

2024-05-10

Advanced Materials

Abstract:Optical waveguides fabricated in single crystals offer crucial passive/active optical components for photonic integrated circuits. Single crystals possess inherent advantages over their amorphous counterpart, such as lower optical losses in visible‐to‐mid‐infrared band, larger peak emission cross‐section, higher doping concentration. However, the writing of Type‐I positive refractive index modified waveguides in single crystals using femtosecond laser technology presents significant challenges. Herein, we introduce a novel femtosecond laser direct writing technique that combines slit‐shaping with an immersion oil objective to fabricate low‐loss Type‐I waveguides in single crystals. This approach allows for precise control of waveguide shape, size, mode‐field and refractive index distribution, with a spatial resolution as high as 700 nm and a high positive refractive index variation on the order of 10−2, introducing new degrees of freedom to design and fabricate passive/active optical waveguide devices. As a proof‐of‐concept, we successfully produced a 7 mm‐long circular‐shaped gain waveguide (∼10 μm in diameter) in an Er3+‐doped YAG single crystal, exhibiting a propagation loss as low as 0.23 dB/cm, a net gain of ∼3 dB and a polarization‐insensitive character. The newly‐developed technique is theoretically applicable to arbitrary single crystals, holding promising potential for various applications in integrated optics, optical communication, and photonic quantum circuits. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,nanoscience & nanotechnology,physics, applied,chemistry, physical, condensed matter
Recoverable and rewritable waveguide beam splitters fabricated by tailored femtosecond laser writing of lithium tantalate crystal

Bo Wu,Bin Zhang,Weijie Liu,Qingming Lu,Lei Wang,Feng Chen

DOI: https://doi.org/10.1016/j.optlastec.2021.107500

2022-01-01

Abstract:We report on an integrated 1 × 5 beam splitter based on optical waveguides with type I and type II modifications of femtosecond laser (fs-laser) writing in lithium tantalate (LiTaO3) crystal. The cladding waveguides consisting of type-II modified tracks are used for optical signal transmission, photon crosstalk reduction, and mode field regulation. The single-line waveguides with type I modification are utilized for light beam splitting. Type-I single-line waveguides are with relatively weak thermal stability, which are utilized to produce a recoverable and rewritable optical beam splitter, and the structure still possesses good transmission properties after the reconstruction. Especially, the type-I modified waveguides can be rewritten in very short time (1–2 min). The beam splitter shows good performance in outputting programmable optical signals, which provides a possible strategy for the development of erasable photonic data processors.

optics,physics, applied
Ultrafast laser inscribed waveguides in tailored fluoride glasses: an enabling technology for mid-infrared integrated photonics devices

Toney T. Fernandez,B. Johnston,S. Gross,S. Cozic,M. Poulain,H. Mahmodi,I. Kabakova,M. Withford,A. Fuerbach

DOI: https://doi.org/10.1038/s41598-022-18701-y

IF: 4.6

2022-08-30

Scientific Reports

Abstract:Zirconium fluoride (ZBLAN) glass, the standard material used in fiber-based mid-infrared photonics, has been re-designed to enable the fabrication of high index-contrast low-loss waveguides via femtosecond laser direct writing. We demonstrate that in contrast to pure ZBLAN, a positive index change of close to 10 −2 can be induced in hybrid zirconium/hafnium (Z/HBLAN) glasses during ultrafast laser inscription and show that this can be explained by an electron cloud distortion effect that is driven by the existence of two glass formers with contrasting polarizability. High numerical aperture (NA) type-I waveguides that support a well confined 3.1 μm wavelength mode with a mode-field diameter (MFD) as small as 12 μm have successfully been fabricated. These findings open the door for the fabrication of mid-infrared integrated photonic devices that can readily be pigtailed to existing ZBLAN fibers.

multidisciplinary sciences
Three-dimensional femtosecond laser inscription of type a-based high-efficiency first-order waveguide Bragg gratings

Romain Laberdesque,Laura Loi,Théo Guérineau,Alain Abou Khalil,Sylvain Danto,Thierry Cardinal,Lionel Canioni,Yannick Petit

DOI: https://doi.org/10.3389/aot.2023.1237679

2023-07-27

Advanced Optical Technologies

Abstract:A novel type of waveguide Bragg grating (WBG) is demonstrated based on femtosecond laser-induced Type A refractive index modifications, namely based of the photochemistry of silver species in a specialty ortho-phosphate glass matrix. First-order WBGs are reported in the near-infrared and down to 736 nm in the visible. Relative transmission measurements with a 500 μm long WBGs lead to narrow-bandwidth attenuations (sub-nm spectral FWHM) from 2.29 dB to 6.25 dB for periods from 240 nm to 280 nm, respectively. The corresponding estimated backward coupling coefficients show high values from 1.66 mm-1 up to 2.69 mm-1. Additionally, we report on a true 3D helix-shaped WBG that shows an even stronger relative attenuation of 10.3 dB for a 500 μm long WBG, equivalently corresponding to a backward coupling coefficient of 3.7 mm-1. These novel results pave the way for new silver-based laser-inscribed integrated photonic devices, among which the combination of Bragg gratings to form active/passive optical resonators, but also the direct inscription of WBG at the glass interface for enhanced sensing applications.
All-in-Fiber Cladding Interferometric and Bragg Grating Components Made via Plane-by-Plane Femtosecond Laser Inscription

Antreas Theodosiou,Andreas Ioannou,Kyriacos Kalli

DOI: https://doi.org/10.1109/jlt.2019.2925263

IF: 4.7

2019-09-15

Journal of Lightwave Technology

Abstract:We introduce a method of inscribing in-fiber devices using a femtosecond laser that is applicable to crucial components, such as cladding waveguides (CWGs), cladding MachZehnder interferometers (MZIs), embedded waveguide Bragg gratings (WBGs), and waveguide FabryPerot cavities using the same key femtosecond laser parameters, via an inscribe and step, plane-by-plane approach, applied as necessary on two orthogonal axes. This leads to femtosecond laser-inscribed cladding waveguides and ultra-compact MZIs that can support functional, integrated fiber Bragg gratings; the unique sensing characteristics of the filters are maintained and provide complementary measure and information. This ensures a single inscription process, offering reliability and repetition in component manufacture, as the basic conditions to inscribe the here-demonstrated elements are common. We characterize CWG-WBG devices for axial strain, bend, and response to refractive index. The MZI-WBG is exposed to temperature and humidity excursions, confirming that the unique sensor responses are maintained for this compact, compound sensor. The MZI exhibits response to external refractive index, a large, negative wavelength response with temperature and high sensitivity to humidity, whereas the MZI-located WBG displays a similar sensitivity to conventional core-based Bragg grating sensors to temperature and no response to relative humidity. We consider that this research is an important step in the development of compact, smart optical fiber sensors.

engineering, electrical & electronic,optics,telecommunications

Ultrafast-Laser-Inscribed Type-I Waveguides and Beamsplitters Inside IG2 for Mid-IR Astrophotonics

Ultrafast-laser-inscribed multiscan type-I mid-infrared waveguides and beamsplitters in IG2

Mid-Infrared Waveguides and Beamsplitters Inside IG2 Inscribed by a Femtosecond Laser

Ultrafast-Laser-Inscribed Type-II Waveguides in IG2 for Mid-Infrared Applications

Single-scan Ultrafast Laser Inscription of Waveguides in IG2 for Type-I and Type-Ii Operation in the Mid-Infrared.

Ultrafast-Laser-Inscribed Type-II Waveguides in IG2: Self-Organized Morphology and Waveguiding Properties

Compact 1 X 3 Waveguide Beam Splitters with Variable Splitting Ratios in LiNbO3 Crystal Fabricated by Femtosecond Laser Direct Writing

Morphology and waveguiding properties of ultrafast-laser-inscribed type-II waveguides in IG2

DESIGN AND FABRICATION OF VISIBLE+1.54μm LASER/LONGWAVE INFRARED DICHROIC BEAMSPLITTER

Ultrafast laser inscription of mid-IR directional couplers for stellar interferometry

Silicon-on-Insulator Waveguide Devices for Broadband Mid-Infrared Photonics

Long-wave infrared 1 × 2 MMI based on air-gap beneath silicon rib waveguides.

Germanium-On-Silicon Nitride Waveguides for Mid-Infrared Integrated Photonics

Mid-infrared Nonlinear Silicon Hybrid Waveguide with High Figure of Merit

Ultrafast Laser Inscription of High Performance Mid-Infrared Waveguides in Chalcogenide Glass

Development of a 3D ultrafast laser written near-infrared spectro-interferometer

3D Laser Writing of Low‐Loss Cross‐Section‐Variable Type‐I Optical Waveguide Passive/Active Integrated Devices in Single Crystals

Recoverable and rewritable waveguide beam splitters fabricated by tailored femtosecond laser writing of lithium tantalate crystal

Ultrafast laser inscribed waveguides in tailored fluoride glasses: an enabling technology for mid-infrared integrated photonics devices

Three-dimensional femtosecond laser inscription of type a-based high-efficiency first-order waveguide Bragg gratings

All-in-Fiber Cladding Interferometric and Bragg Grating Components Made via Plane-by-Plane Femtosecond Laser Inscription