Abstract:This paper presents an innovative self‐centering dual‐limb thin‐walled rocking pier with replaceable energy dissipation beams (DLTW‐REDB), combining self‐centering hybrid system concepts with DLTW bridge piers. It addresses the issue of DLTW piers being prone to damage in the longitudinal direction during strong earthquakes, enabling rapid post‐earthquake recovery. The study focuses on the following aspects: (1) A 1:5 scale quasistatic reversed cyclic test was conducted to assess the seismic performance of the system. The results demonstrated that the hybrid system exhibited a characteristic "flag‐shaped" hysteretic response, similar to traditional rocking bridge piers. It exhibited excellent energy dissipation and self‐centering capability. Moreover, plastic damage primarily occurred in the replaceable energy dissipation beam, which could be easily replaced within 2 h while restoring the original structural behavior. (2) The self‐centering mechanism of the system was analyzed based on principles of structural mechanics, explicitly deriving the hysteresis, and residual deformation expressions. A quantitative index, the self‐centering coefficient (λ), was established to measure the self‐centering capability. (3) Numerical models were employed to analyze the sensitivity of parameters such as the prestressed reinforcement ratio, initial tension in prestressing tendons, and yield force of the energy dissipation beam. The results suggested that raising the initial tension enhanced the bearing force and reduced the residual displacement. However, raising the yield force improved the bearing capacity and energy dissipation capability, while residual displacement increased. Therefore, it is recommended to set the self‐centering coefficient at approximately 1.0 to achieve a trade‐off between effective energy dissipation capacity and acceptable residual deformation.

Hysteretic Behavior Degeneration Mechanism and Damage Evaluation of Self-Centering Bridge Pier System

Hysteretic Model for Steel Piers Considering the Local Buckling of Steel Plates

A Parametric Investigation on Ultra-low Cycle Fatigue Damage of Steel Bridge Piers under Horizontal Bi-directional Seismic Excitations

Simplified theoretical model for self-centering concrete bridge piers with stiffness deterioration

&Lt;title>systematic Numerical Analysis of the Damage Index Method Used for Bridge Diagnostics</title>

Hysteretic model of reinforced concrete bridge piers based on earthquake damage and corrosion from saline soil

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Theoretical study on the nonlinear contact mechanism of reinforced self‐centering bridge pier system based on the Winkler model

Experimental Investigation on Lateral Resistance Capacity Enhancement Effect of a Self-Centering Shape Factor in Self-Centering Pier Systems

A Novel Mode Sharp-Based Damage Detection Method of Large-Span Bridges

Energy-Based Damage Assessment Methodology for Structural Health Monitoring of Modern Reinforced Concrete Bridge Columns

Identifying Damage in Long-Span Self-Anchored Suspension Bridges Using Characteristic Indices

Recent Development of Self-Centering System for Seismic Design of Bridge Piers: Experimental and Theoretical Investigation

Research on the Intrinsic Lateral Stiffness and Hysteretic Mechanics of Self-Centering Pier

Fiber-based damage analysis of reinforced concrete bridge piers

Experimental investigation on the cyclic behaviors of corroded coastal bridge piers with transfer of plastic hinge due to non-uniform corrosion

Experimental Research and Finite Element Analysis of Bridge Piers Failed in Flexure-Shear Modes

Research and Modification on the Park-Ang Damage Index for Railway Rectangular Piers

Seismic resilience mechanism of self‐centering dual‐limb thin‐walled rocking piers with replaceable energy dissipation beams

A Simplified Model and Experimental Response of Self-Centring Bridge Piers with Ductile Connections

Mechanical Behavior of a Double-Column Self-Centering Pier Fused with Shear Links