Abstract:This paper presents an innovative self‐centering dual‐limb thin‐walled rocking pier with replaceable energy dissipation beams (DLTW‐REDB), combining self‐centering hybrid system concepts with DLTW bridge piers. It addresses the issue of DLTW piers being prone to damage in the longitudinal direction during strong earthquakes, enabling rapid post‐earthquake recovery. The study focuses on the following aspects: (1) A 1:5 scale quasistatic reversed cyclic test was conducted to assess the seismic performance of the system. The results demonstrated that the hybrid system exhibited a characteristic "flag‐shaped" hysteretic response, similar to traditional rocking bridge piers. It exhibited excellent energy dissipation and self‐centering capability. Moreover, plastic damage primarily occurred in the replaceable energy dissipation beam, which could be easily replaced within 2 h while restoring the original structural behavior. (2) The self‐centering mechanism of the system was analyzed based on principles of structural mechanics, explicitly deriving the hysteresis, and residual deformation expressions. A quantitative index, the self‐centering coefficient (λ), was established to measure the self‐centering capability. (3) Numerical models were employed to analyze the sensitivity of parameters such as the prestressed reinforcement ratio, initial tension in prestressing tendons, and yield force of the energy dissipation beam. The results suggested that raising the initial tension enhanced the bearing force and reduced the residual displacement. However, raising the yield force improved the bearing capacity and energy dissipation capability, while residual displacement increased. Therefore, it is recommended to set the self‐centering coefficient at approximately 1.0 to achieve a trade‐off between effective energy dissipation capacity and acceptable residual deformation.

Recent Development of Self-Centering System for Seismic Design of Bridge Piers: Experimental and Theoretical Investigation

A Parametric Investigation on Ultra-low Cycle Fatigue Damage of Steel Bridge Piers under Horizontal Bi-directional Seismic Excitations

A Method for Controlling Seismic Damage of RC Bridge Piers Subjected to Strong Aftershocks

Local Stability Study of New Bridge Piers with Self-Centering Joints

EXPERIMENTAL STUDY AND ANALYSIS ON THE SEISMIC PERFORMANCE OF A SELF-CENTERING BRIDGE PIER

Experimental Study on Self-Centering Link Beams Using Post-Tensioned Steel-Sma Composite Tendons

A Simplified Model and Experimental Response of Self-Centring Bridge Piers with Ductile Connections

EXPERIMENTAL EVALUATION OF A TYPICAL BRIDGE COLUMN FOOTING DESIGNED TO CURRENT CALTRANS STANDARDS

Research on the Intrinsic Lateral Stiffness and Hysteretic Mechanics of Self-Centering Pier

Mechanical Behavior of a Double-Column Self-Centering Pier Fused with Shear Links

Simplified theoretical model for self-centering concrete bridge piers with stiffness deterioration

Analysis and Verification of Load–Deformation Response for Rocking Self-Centering Bridge Piers

Theoretical study on the nonlinear contact mechanism of reinforced self‐centering bridge pier system based on the Winkler model

Experimental Investigation on Lateral Resistance Capacity Enhancement Effect of a Self-Centering Shape Factor in Self-Centering Pier Systems

Study on the pier bottom self-centering seismic isolation structure of the high-pier continuous rigid frame bridges

SEISMIC DESIGN METHOD OF SMALL AND MEDIUM SPAN BRIDGE CONSIDERING BEARING FRICTION SLIPPING

Hysteretic Behavior Degeneration Mechanism and Damage Evaluation of Self-Centering Bridge Pier System

Seismic resilience mechanism of self‐centering dual‐limb thin‐walled rocking piers with replaceable energy dissipation beams

Experimental study on the seismic performance of self-centering bridge piers incorporating ECC and superelastic SMA bars in the plastic hinge regions

Analysis of self-centering steel structures' development

Experimental study on the seismic performance of a curved bridge via large-scale hybrid tests