Abstract:As the main seismic component of a bridge, seismic damage to the bridge pier has a greater effect on its subsequent service. In the offshore chloride environment, the issues (e.g., reinforcement bar corrosion and attenuation of concrete strength) of piers caused by chloride ion seriously curtail the normal service life and deteriorate the anti-seismic property of bridge structures. The engineered cementitious composite (ECC)-reinforced concrete (RC) composite pier with high strength reinforcement bars (HSRB) is expected to solve the above problems. This study aims to clarify the time-varying seismic vulnerability (SV) of the HSRBECC-RC composite pier during its full life cycle (FLC). Based on OpenSees, the refined finite element analysis models of RC pier, ECC-RC composite pier, and HSRBECC-RC composite pier have been established. Moreover, using the nonlinear time-path dynamic analysis method, the influence of chloride ion erosion on the time-dependent seismic vulnerability (SV) of these different piers in different service life and different peak ground acceleration (PGA) were analyzed from a dynamic point of view. The research shows that the exceeding probability (EP) of the same damage level increases with the enhancement of service time and PGA and with the increase of destruction, the exceeding probability (EP) of slight damage (DL-1), moderate damage (DL-2), serious damage (DL-3), and complete collapse (DL-4) decreases in turn; the corrosion degree of chloride ion to piers is small during the early service period, the time-varying vulnerability curve of the bridge piers is almost the same as that of a new bridge, and during later service, as the extent of chloride ion corrosion deepens, exceeding probability (EP) under severe damage (DL-3) and complete collapse (DL-4) is increased, and the seismic performance is significantly enhanced.

Simplified theoretical model for self-centering concrete bridge piers with stiffness deterioration

Hysteretic Model for Steel Piers Considering the Local Buckling of Steel Plates

Research on the Multi-Shear Spring Model for Circular-Section Steel Piers

Static Shear Performance and Residual Axial Capacity of Rectangular RC Bridge Piers under Near-Ground Lateral Loads

Ultra-low Cycle Fatigue Evaluation Method for Unstiffened Steel Piers Using Fiber Model

Improvement of hysteretic constitutive model for reinforcements considering buckling

Improved Method of Giuffre-Menegotto-Pinto Hysteretic Constitutive Model

A Parametric Investigation on Ultra-low Cycle Fatigue Damage of Steel Bridge Piers under Horizontal Bi-directional Seismic Excitations

Simplified Structural Deterioration Model for Reinforced Concrete Bridge Piers under Cyclic Loading 1

A Simplified Model and Experimental Response of Self-Centring Bridge Piers with Ductile Connections

Research on the Intrinsic Lateral Stiffness and Hysteretic Mechanics of Self-Centering Pier

EXPERIMENTAL STUDY AND ANALYSIS ON THE SEISMIC PERFORMANCE OF A SELF-CENTERING BRIDGE PIER

Local Stability Study of New Bridge Piers with Self-Centering Joints

Recent Development of Self-Centering System for Seismic Design of Bridge Piers: Experimental and Theoretical Investigation

Hysteretic model of reinforced concrete bridge piers based on earthquake damage and corrosion from saline soil

Mechanical Behavior of a Double-Column Self-Centering Pier Fused with Shear Links

Study on time-varying seismic vulnerability and analysis of ECC-RC composite piers using high strength reinforcement bars in offshore environment

Analysis and Verification of Load–Deformation Response for Rocking Self-Centering Bridge Piers

Seismic Analysis of Long Span Continuous Rigid-Frame Bridge with Thin-Walled High Piers

Experimental Research and Finite Element Analysis of Bridge Piers Failed in Flexure-Shear Modes

Three-dimensional finite element modelling for seismic response analysis of pile-supported bridges