Abstract:The group studs arrangement is applied to prefabricated composite beams to significantly improve construction speed. However, contact vibration exists in the unconstrained interface area of the high-speed railway composite beam during the operation period, which degrades the connecting performance of the composite beam and adversely affects the overall structure. In this study, finite element simulations of the vibration of concrete slabs and steel beams in the unconstrained interface area were carried out to obtain finite element models with damage. The effects of vibration damage on the degradation of the studs were investigated by push-out and pull-out tests using finite element simulation of the local specimen model. The macroscopic ontological models of the undamaged and previously damaged group studs were obtained. Compared with the specimen without damage, the ultimate bearing capacity of the pushed-out specimen with damage decreased by 24.8%; the ultimate slip decreased by 15%; and the stiffness decreased by 12.8%. The behavior of the pulled-out specimen with damage was almost the same as that of the specimen without damage. On this basis, a finite element model of the train–track–composite beam coupling system was established. The influence of the degradation of the connection on the coupling system with 300 km/h, 330 km/h, and 360 km/h train speeds was analyzed under the conditions of single-train driving and a two-train rendezvous. In the case of single-train travel, compared with the undamaged composite beam, the mid-span vertical displacements of the composite beams with damage increased by 13%, 8.38%, and 6.2% for train speeds of 360 km/h, 330 km/h, and 300 km/h, respectively; the transverse displacements increased by 24.2%, 15%, and 9.2%, respectively. In the case of a two-train rendezvous, the mid-span vertical displacements increased by 8.8%, 13.7%, and 12.8%, respectively; the transverse displacements increased by 26.4%, 53%, and 24.8%, respectively.

Theoretical and Numerical Investigation of Damage Sensitivity of Steel–Concrete Composite Beam Bridges

A Parametric Investigation on Ultra-low Cycle Fatigue Damage of Steel Bridge Piers under Horizontal Bi-directional Seismic Excitations

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Study on FE Models in Elasto-Plastic Seismic Performance Evaluation of Steel Arch Bridge

Damage Characteristics of Thin-Walled Steel Arch Bridges Subjected to In-Plane Earthquake Action

Damage Identification of Multi-Box Steel-Concrete Composite Bridges Based on Modal Curvature Difference Method

Seismic Fragility of a Typical Bridge Using Extrapolated Experimental Damage Limit States

Accurate FEM of Steel-Concrete Composite Box Girder Bridge for Damage Identification Based on Dynamical Experimental Study

Vibration-Based Damage Detection of a Steel-Concrete Composite Slab Using Non-Model-Based and Model-Based Methods

Hysteretic Behavior Degeneration Mechanism and Damage Evaluation of Self-Centering Bridge Pier System

Damage location, quantification and characterization of steel-concrete composite beams using acoustic emission

Experimental and numerical studies on damage severity identification of simply supported beam bridges

Effect of Deck Deterioration on Overall System Behavior, Resilience and Remaining Life of Composite Steel Girder Bridges

Numerical Investigation on the Dynamic Performance of Steel–Concrete Composite Continuous Rigid Bridges Subjected to Moving Vehicles

Static Behavior of Stud Shear Connectors with Initial Damage in Steel-Uhpc Composite Bridges

Results and Implications of the Damage Index Method Applied to a Multi-Span Continuous Segmental Prestressed Concrete Bridge

&Lt;title>systematic Numerical Analysis of the Damage Index Method Used for Bridge Diagnostics</title>

Numerical Study on the Effect of Interface Dynamic Damage of Steel‒Concrete Composite Beam Bridge Caused by High‒Frequency Impact Load

Damage modes and mechanism of steel-concrete composite bridge slabs under contact explosion

Comparative analysis of different types of damage indexes of coastal bridges based on time-varying seismic fragility

Research on damage identification of simply supported bridge based on effect size method for vehicle-bridge coupled vibration