Abstract:Multilevel inverters typically require a large number of power switches, increasing the likelihood of faults and compromising system reliability. To enhance inverter reliability, this article introduces a five-level multilevel inverter with fault-tolerant capabilities. This topology employs two DC voltage sources with four unidirectional and two bidirectional power IGBT switches. A fault-tolerant control strategy has been developed to reconfigure the topology whenever an open circuit fault occurs in a switch. To evaluate the proposed topology, a loss analysis and efficiency assessment were conducted using Piecewise Linear Electrical Circuit Simulation. The results showed 36.35 W of power loss and an efficiency of 96.49% for 1 kW of output power. The total standing voltage per unit and cost function of the proposed topology are 6 and 4.2, respectively, which are minimal compared to other fault-tolerant topologies. Furthermore, a laboratory prototype was developed using a DSPACE-1202 controller to validate the results. The voltage stress on the power devices was found to be reduced by 25–50% under various post-fault conditions compared to healthy condition. The proposed topology is able to withstand OC fault in single unidirectional switch or multiple unidirectional switches and still be able to generate 64% of the rated output rms voltage. If an OC fault occurs in any of the bidirectional switches, then the topology is fully tolerant by generating 100% of the rated output rms voltage. The reliability for the proposed topology is performed using Markov chain rule and proved that the proposed topology is superior to other topologies.

Fault-tolerance Operation Analysis of Multiphase Interleaved Inverters Based on Short-Circuiting Windings

Fault Analysis and Fault-Tolerant Design for Parallel Redundant Inverter Systems in Case of IGBT Short-Circuit Failures

Fault Analysis and Fault-tolerant Design for Parallel Redundant Inverter Systems

A Fault Tolerant Control Strategy for Dual Three-Phase PMSM under Single-Phase Open Circuit Fault Considering Inductance Asymmetry

A Short-Circuit Fault-Tolerant Strategy for Three-Phase Four-Wire Flying Capacitor Three-Level Inverters

Fault Analysis on Conventional Parallel Inverter Systems

A fault-tolerant T-type three-level inverter system

Fault-tolerant Control Strategy with Reduced Switching Frequency for Inverter-Based Fault in Open-Winding PMSM System

A Redundant Unit to Form T-Type Three-Level Inverters Tolerant of IGBT Open-Circuit Faults in Multiple Legs

Strategies for the fault-tolerant current control of a multiphase machine under open phase conditions

Recovering Partial Three-Level Operation in a T-Type Inverter with Fault Management Redundant Unit

A Hybrid Power Sharing Strategy for Parallel Inverters with Interconnect Lines Fault Ride-through

A Novel Fault-Tolerant Control Scheme for Shunt Active Power Filter with High Reliability

Fault Analysis for Inverter Driven Dual-Winding PMSMs

A Fault-Tolerant Control Method for Interleaved Boost Converters

Two short-circuit fault tolerant strategies for four-phase permanent-magnet fault-tolerant machine

Fault-Tolerant Reconfiguration Topology and Control Strategy for Symmetric Open-Winding Multiphase Machines

An Asymmetric Short-Circuit Fault Ride-Through Strategy Providing Current Limiting and Continuous Voltage Supply for Three-Phase Three-Wire Stand-Alone Inverters

A fault-tolerant operation method of PMSM fed by cascaded two-level inverters

Asymmetric Fault-Tolerant Control of 3-Phase Coupled Buck-Boost Converter

A Single-Phase Multilevel Inverter Topology with Fault Tolerant Capability for Single and Multiple Switch Failures