Abstract:This research evaluated the feasibility of using iron ore tailings (IOTs) to produce functional conductive composite materials as cement-based sensors based on carbon fiber (CF) reinforced cement composite. In this study, recycled IOTs are used as an alternative material to natural fine aggregate (0%, 30%, and 60%). Nine mixtures were produced. The effects of CF and IOTs content on mechanical properties and electrical conductivity were investigated; Based on the digital image correlation (DIC) system, the stress sensing ability of the specimen was evaluated and the strain field distribution was extracted; According to the results of compressive stress sensing, a predictive compressive stress model was proposed, and the ratio of fractional changes of resistivity (FCR) with unit stress and CF content were fitted; The pore size distribution was studied using nuclear magnetic resonance (NMR) technology; Besides, scanning electron microscope (SEM) and X-ray diffraction (XRD) were used to analyze the microscopic morphology and crystal phase composition. The experimental results revealed that the appropriate IOTs content could improve the pore size distribution and the mechanical properties, which is a maximum increase of 28.12% compared with the plain cement (PC). The DIC strain field distribution shows that the excessive IOTs could increase the brittleness of the matrix, and XRD crystal phase analysis showed that the calcium silicate hydrate (CSH) gel is reduced and the bond with CF is weakened. The addition of CF significantly reduces the resistivity of the composites by an order of magnitude, and the self-sensing capability can be increased by 3 times. The compression stress sensitivity has a linear relationship with the amount of CF, which can be used to predict the compression stress sensing efficiency. It is expected to develop industrial waste IOTs as an effective conductive filler to promote the wider use of CF conductive composite materials.

Filling of Iron Ore Tailings into Poly(vinyl Chloride) Based Composites: Surface Modification Effect and Performance Enhancement

Enhanced Sound Insulation and Mechanical Properties Based on Inorganic Fillers/thermoplastic Elastomer Composites

Formulation optimization and performance enhancement of polyvinyl chloride-silica micropowder composites with a promising flooring application

Surface Modification of Silica Micro-Powder by Titanate Coupling Agent and Its Utilization in PVC Based Composite

Contributions of TCA-KTTO-modified Quartz Tailings and CPE Toughener in PVC Composites to Enhance the Mechanical-Thermal Performance

Effects of Inorganic‐organic Surface Modification on the Mechanical and Thermal Properties of Poly(vinyl Chloride) Composites Reinforced with Fly‐ash

Surface Modification of Shell Waste and Its Application in Polypropylene Composites

Influence of Iron Ore Tailings By-Product on the Mechanical and Electrical Properties of Carbon Fiber Reinforced Cement-Based Composites

Effect of Surface Structure of Nano-Caco3 Particles on Mechanical and Rheological Properties of Pvc Composites

Effect of Properties of CaCO3 Nanoparticles on Interface and Properties of Poly(vinyl Chloride) Composites

Stabilization of iron ore tailing with low-carbon lime/carbide slag-activated ground granulated blast-furnace slag and coal fly ash

Surface modification of talc powder by silane functionalized polycarboxylates and its effect on the performance of polyvinyl chloride composite

Preparation of PVC composite with high filling of fly ash

Effects of surface modification of fumed silica on interfacial structures and mechanical properties of poly(vinyl chloride) composites

The Preparation and Dust Suppression Performance Evaluation of Iron Ore Tailing-Based Cementitious Composites

Hybrid Steel-Polyethylene Fiber-Reinforced Iron Ore Tailing Concrete: Mechanical, Sulfate Freeze–Thaw Resistance, and Microscopic Characteristics

Interfacial Structures and Mechanical Properties of Pvc Composites Reinforced by Caco3 with Different Particle Sizes and Surface Treatments

The Enhancement Performances of Cotton Stalk Fiber/pvc Composites by Sequential Two Steps Modification

Thermoplastic polyurethane composites based on iron tailings: An effective strategy for industrial solid waste utilization

Structure and Mechanical Properties of PVC Composites Filled by Titanate Coupling Agents Modified Nano-CaCO_3

Fabricating super tough polylactic acid based composites by interfacial compatibilization of imidazolium polyurethane modified carbon nanotubes