Abstract:Recent advances in the field of composite materials, aligning them with cost-effectiveness and environmental sustainability, have made the development of materials from industrial waste an attractive area of research. This work introduces an innovative approach for the reuse of globally available industrial waste by hybridizing organic and inorganic by-products to create low-cost composite materials with synergistically enhanced performances. Herein, industrial wastes, namely powdered wood chips (PWC) from the woodworking industry and fly ash (FA) derived from bagasse burning, were incorporated in a thermoplastic polypropylene (PP). Hybrid PP/PWC/FA composites at 70/20/10, 70/15/15 and 70/10/20 wt% were manufactured via extrusion process, followed by injection molding. Micrographic observations and infrared spectroscopy reveal that PWC particles have good physical adherence with PP. In contrast, the hydrophilic nature of FA leads to the creation of gaps at the interface due to the poor interfacial adhesion. The latter difference is reflected in the combined void nucleation modes of particle–fracture and particles–matrix interface decohesion during hybrid composites' tensile deformation. This provides a good synergistic stiffening effect for 70/20/10 wt% PP/PWC/FA hybrid composite, which offers the highest Young's modulus improvement of about 44.43%, while benefiting from balanced tensile strength and strain at yield. Furthermore, a two-way ANOVA at a significance level of 5% also proved the significant effect of PWC and FA reinforcement on the tensile parameters, as the p -values were below 0.05. Melt rheological properties demonstrate complex viscosity decrement for hybrid composites, suggesting a reduction in the energy required during production. Overall, the novel, high-performance hybrid composites developed can be manufactured with less energy consumption and are suitable for applications requiring high-temperature resistance and stiffness such as automotive, construction, and beyond.

Effects of Inorganic‐organic Surface Modification on the Mechanical and Thermal Properties of Poly(vinyl Chloride) Composites Reinforced with Fly‐ash

Impact of Chemical Modification of Bamboo Fibers on Properties of Fiber Reinforced PVC Composites

Effect of Surface Modification of Montmorillonite on the Properties of Rigid Polyurethane Foam Composites

Preparation of PVC composite with high filling of fly ash

Surface modification of purified fly ash and application in polymer

Preparation and mechanism of fly ash based composite fillers with different morphologies and its application in filling polyamide 6

Thermal Stability, Smoke Emission and Mechanical Properties of Poly(vinyl Chloride)/hydrotalcite Nanocomposites

Surface Modification of Shell Waste and Its Application in Polypropylene Composites

Utilization of Mechanochemically Pretreated Municipal Solid Waste Incineration Fly Ash for Supplementary Cementitious Material

In-Depth Insight into the Effects of Steel Slag and Calcium Hydroxide on the Properties of a Fly Ash-Red Mud Geopolymer

Transforming fly ash into value: Sustainable LLDPE-fly ash composites via rotational molding

Processing characteristics and mechanical and electrical properties of chlorinated styrene–butadiene rubber/fly ash composites

Effect of surface functionalization on the surface and inter-facial properties of thermoplastic-coated carbon fibers

The Influence of Fly Ash on the Foaming Behavior and Flame Retardancy of Polyurethane Grouting Materials

Synergistic reinforcing effect of fly ash and powdered wood chips on the properties of polypropylene hybrid composites

Investigating the Mechanical and Durability Characteristics of Fly Ash Foam Concrete

Effects of calcium formate on early-age strength and microstructure of high-volume fly ash cement systems

Nano-layered Double Hydroxides As Efficient Endothermic, Strengthening, and Flame-retardant Agents for Fly Ash/Polyurethane Composite Materials

Effect of Hyperbranched Poly(amine-ester) Grafted Nano-SiO_2 on Reinforcement and Toughness of PVC

Surface modification of fly ash by mechano-chemical treatment

Effects of PVA fibers on microstructures and hydration products of cementitious composites with and without fly ash