Abstract:Negative temperature coefficient (NTC) thermistor materials based on (LaMn 0.5 Co 0.5 O 3 ) x –(Ni 0.66 Mn 2.34 O 4 ) 1−x (0 ≤ x ≤ 0.5) composite ceramics, are fabricated by the conventional solid-state reaction method. The crystal structure, surface morphology and electrical properties of the composite ceramics are investigated and characterized by X-ray powders diffraction (XRD), scanning electron microscope (SEM), and Agilent digital multimeter, respectively. XRD results show that main phases of as-sintered ceramics are a cubic spinel structure Ni 0.66 Mn 2.34 O 4 phase and a rhombohedral perovskite structure LaMn 0.5 Co 0.5 O 3 phase. SEM images indicate that the grain size of the composite ceramics decreases with increasing the low-resistivity perovskite phase. The ρ 25 and B value of the composite ceramics decreases with increasing x, and the B is still reasonably high in the range of 4000–3500 K when x ≤ 0.2. Meanwhile, the introduction of the perovskite phase leads to a decrease in the resistance drift, which the ΔR/R 0 is relatively low (0.26–1.8 %) after annealing at 125 °C for 600 h in air atmosphere. These findings exhibit that (LaMn 0.5 Co 0.5 O 3 ) x –(Ni 0.66 Mn 2.34 O 4 ) 1−x (0 ≤ x ≤ 0.5) composite ceramics have a higher electrical stability in comparison with Ni 0.66 Mn 2.34 O 4 ceramics, are helpful for meeting demands for obtaining better stability and performance of NTC composites ceramics.

Electrical and aging properties of Mn2-xNi0.7Cu0.3ZnxO4 NTC ceramic thermistors for low-resistance applications

Spinel-structured Ni-free Zn 0.9 Cu x Mn 2.1- x O 4 (0.1 ≤ x ≤ 0.5) thermistors of negative temperature coefficient

Spinel-structured Ni-free ZnCuMnO (0.1 ≤ ≤ 0.5) thermistors of negative temperature coefficient

Synthesis and high thermal stability of Mn doped Y2/3Cu3Ti4O12 negative temperature coefficient ceramic

Annealing on the Electrical Properties of Ni0.75Mn2.25O4 and Zn0.8Ni0.75Mn1.45O4 NTC Ceramics

Aging Improvement in Cu-containing NTC Ceramics Prepared by Co-Precipitation Method

Structure and Electrical Performance of Mn1.5−0.5xCo0.9−0.3xNi0.6−0.2xCuxO4 NTC Ceramics Prepared by Heterogeneous Precipitation

The Investigation of Zn Content on the Structure and Electrical Properties of Zn X Cu0.2Ni0.66Mn2.14−x O4 Negative Temperature Coefficient Ceramics

NTC thermo-sensitive ceramics with low B value and high resistance at low temperature in Li-doped Mn0.6Ni0.9Co1.5O4 system

Preparation and characterization of LaMn 0.5 Co 0.5 O 3 –Ni 0.66 Mn 2.34 O 4 composite NTC ceramics

Aging properties of spinel‐type high‐entropy oxides (Co.2Cr.2Fe.2Mn.2Zn.2)3O4 for thermistors

Characterization of NiO based ceramics modified with Y2O3/BiSbO3 for application of NTC thermistors

Crystal structure, cation distribution and electrical properties in Ni Al Mn3−−O4 (0 < x < 0.6; 0 < y < 0.3) spinel-based NTC chip thermistors

A novel MnCoNiCuZnO5 complex-phase ceramic for negative temperature coefficient thermistors

New Negative Temperature Coefficient Thermistor Ceramics in Mn-doped CaCu3−xMnxTi4O12 (0≤x≤1) System

Preparation and Characterization of Negative Temperature Coefficient (ni,mn) 3 O 4 –la(mn,ni)o 3 Composite

Preparation and Electrical Properties of Mn1.05−yCo1.95−x−z−wNixMgyAlzFewO4 NTC Ceramic Derived from Microemulsion Method

Effects Of Ni And Cu Content On The Electrical Properties Of Mn-Ni-Cu-O Ntc Thermistors

Effects of Cu and Zn Co-Doping on the Electrical Properties of Ni0.5Mn2.5O4 NTC Ceramics

X-ray Diffraction and Infrared Spectra Studies of FexMn2.34−xNi0.66O4 (0<x<1) NTC Ceramics

Preparation and characterization of electrical properties of FeNiMnO4 NTC thermistors