Abstract:Cu2SnS3 (CTS), a typical ternary copper-based sulfide, is considered as a potential p-type thermoelectric (TE) material with the advantages of environmental friendliness and low cost, but its performance is limited by the high lattice thermal conductivity and electrical resistivity. Herein, we have successfully synthesized undoped and In-doped CTS nanoparticles with a pure tetragonal phase by the colloidal method. More interestingly, plenty of twin boundaries appear in all the samples sintered from the synthesized nanoparticles independent of composition. The twin boundaries can effectively reduce the lattice thermal conductivity, while the tetragonal phase is beneficial to meliorate the electrical performance of CTS. Consequently, the highest zT reaches 0.36 at 700 K for Cu2Sn0.85In0.15S3, which is enhanced by 17 times compared to that of the pristine CTS with mainly the monoclinic phase. The tunable phase and microstructure via the colloidal method provide useful guidance to promote the performance of eco-friendly TE sulfides.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01483.Lattice thermal conductivity (κl) calculation; observed, calculated, and difference Rietveld refined XRD patterns for Cu2Sn1–xInxS3 (x = 0, 0.05, 0.1, 0.15, and 0.25) samples; SEM images under different magnifications of the Cu2Sn0.85In0.15S3-sintered sample; temperature dependence of electrical conductivity, Seebeck coefficient, PF of Cu2Sn0.85In0.15S3 ("brm" stands for before reversible measurement, "arm" stands for after reversible measurement); XRD patterns of Cu2Sn0.85In0.15S3; calculated band structures of In-doped t-CTS (Cu2Sn0.75In0.25S3); low-magnification TEM image, HRTEM image of Cu2SnS3; structural data (position, occupancies, Biso, and bond distances) of m-CTS, t-CTS, and c-CTS; and carrier concentration of Cu2Sn1–xInxS3 (x = 0, 0.05, 0.1, 0.15, and 0.25) samples (PDF)This article has not yet been cited by other publications.

Realizing zT>2 in Environment-Friendly Monoclinic Cu 2 S-Tetragonal Cu 1.96 S Nano-Phase Junctions for Thermoelectrics.

CsCu5S3: Promising Thermoelectric Material with Enhanced Phase Transition Temperature.

Phase Composition Manipulation and Twin Boundary Engineering Lead to Enhanced Thermoelectric Performance of Cu 2 SnS 3

High Thermoelectric Performance in Cu2SnS3 by Control Over Phase‐Dependent Mobility Edge

Phase Tuning for Enhancing the Thermoelectric Performance of Solution-Synthesized Cu 2– x S

High thermoelectric performance near the Mott–Ioffe–Regel limit in Cu S0.6Te0.4 meta-phases

Multiscale architectures boosting thermoelectric performance of copper sulfide compound

Excellent thermoelectric properties and stability realized in copper sulfides based composites via complex nanostructuring

Enhanced thermoelectric properties of Cu1.8S via the introduction of ZnS nanostructures

High Thermoelectric Figure of Merit Achieved in Cu2S1-xTex Alloys Synthesized by Mechanical Alloying and Spark Plasma Sintering

Enhancing the Thermoelectric Performance of Cu1.8S by Sb/Sn Co-Doping and Incorporating Multiscale Defects to Scatter Heat-Carrying Phonons

Hierarchically Structured Thermoelectric Materials in Quaternary System Cu–Zn–Sn–S Featuring a Mosaic-type Nanostructure

Pseudopolymorphic Phase Engineering for Improved Thermoelectric Performance in Copper Sulfides

Microstructural Insights into the Transformation of Cubic, Low-Temperature, Disordered Cu 2 ZnSnS 4 into the Tetragonal Form

Multiple Nanostructures in High Performance Cu2S0.5Te0.5 Thermoelectric Materials

Enhanced Thermoelectric Properties of Earth-Abundant Cu2sns3 Via in Doping Effect

Enhancing thermoelectric and mechanical properties of p-type Cu3SbSe4-based materials via embedding nanoscale Sb2Se3

Enhanced Thermoelectricity in High-Temperature Β-Phase Copper(I) Selenides Embedded with Cu2Te Nanoclusters.

Thermoelectric Performance of Hydrothermally Synthesized Micro/nano Cu2-xS

Nanostructure Engineering and Performance Enhancement in Fe2O3-Dispersed Cu12Sb4S13 Thermoelectric Composites with Earth-Abundant Elements.

Interface‐Enhanced High‐Temperature Thermoelectricity in Cu1.99Se/B4C Composites with Synergistically Improved Mechanical Strength