Abstract:High strength-elongation synergy and its dependence on microstructure are the eternal themes of metallic materials including Ti alloys. In this study, the relationship between the microstructure evolution and mechanical properties of the Ti-25Zr-4Al-1.5Mn (TZAM, wt. %) near-α Ti alloy was systematically investigated after hot rolling at temperatures ranging in the whole solid solution region. The content of primary α phase decreased gradually with the increasing of rolling temperature. An excellent comprehensive mechanical properties with a yield strength of 1055±10 MPa and a total elongation of 23.6±0.6% were obtained for the specimen after rolling at 750 °C (single α phase temperature region). This great strength-elongation synergy is mainly due to the synthetic action of substructure strengthening, dislocation strengthening, basal random heterogeneity (BRH) texture, and suitable content of β phase. The α" martensitic phase was formed after rolling at temperatures of 800 and 850 °C (α + β two-phase temperature region), resulting in a significant decrease in yield strength. However, remarkable work hardening with a rate of approximately 10 GPa occurred in both specimens. The whole evolution process of primary α grains, namely dynamic recovery and recrystallization during hot-rolled is deeply discussed. When the rolling temperature increased to 900 °C (single β phase temperature region), the dominated acicular α´ martensitic phase with high dislocation density resulted in an ultra-high strength (1264±12 and 1488±11 MPa for yield and tensile strength respectively) at the expense of plasticity. These findings revealed the microstructure evolution and its relationship to the mechanical properties of a TiZr-based alloy after the thermomechanical processing and helped to understand deeply the theory of metallic strengthening and elongation.

Microstructure and Mechanical Properties of Caliber Rolled AlN/AZ91 Composite

Microstructural Evolution and Mechanical Properties of Pure Aluminum upon Multi-Pass Caliber Rolling

Recrystallization Behavior and Mechanical Properties of Az31b Alloy During the Hot-Rolling Process

Microstructure Regulation and Strength-Elongation Synergy of the Near Alpha TZAM Alloy Via Thermomechanical Processing

Enhancing grain refinement and mechanical properties of AA1100/MgAZ31/AA1100 composites by using different roll bonding techniques

Effect of Cold and Warm Rolling on the Particle Distribution and Tensile Properties of Heterogeneous Structured AlN/Al Nanocomposites

Microstructure study of hot rolling nanosized in-situ Al2O3 particle reinforced A356 matrix composites

A new in situ composite fabricated by powder metallurgy with aluminum and nanocrystalline ZrO2 particles

The aging behavior, microstructure and mechanical properties of AlN/AZ91 composite

Effect of caliber rolling on microstructures and properties of an inoculated Cu–Al–Ni shape memory alloy

Microstructure, texture and mechanical properties of the rolled high modulus Mg-Y-Zn-Al-Li alloy

Microstructural Modification and Strength Enhancement by SiC Nanoparticles in AZ31 Magnesium Alloy During Hot Rolling

Microstructure, Mechanical Properties and Fracture Mechanism of Ti2AlC Reinforced AZ91D Composites Fabricated by Stir Casting

Microstructural Evolution and Increased High-Temperature Tensile Strength of Extruded and Aged AlN/Al Reinforced Mg-10Gd-3Y-1Zn Composites

Grain Refinement and Orientation of AZ31B Magnesium Alloy in Hot Flow Forming under Different Thickness Reductions

Microstructure elaboration and mechanical properties of AlN_p/4032Al composite

Evolution of microstructure and mechanical properties of graphene nanoplates and ZrB<sub>2</sub> nanoparticles reinforced AA6111 composites during hot rolling deformation

Revealing the Microstructure Evolution Mechanism and Mechanical Responses of a Novel Al–Zn–Mg–Cu Alloy by Hot Deformation Process

Evolution of the Microstructure and Mechanical Properties of Al-B Composite with the Ultrafine-Grained Aluminum Matrix

Effect of Adding AlN Ceramic Particles on the Micromorphology of the Mg 17 Al 12 Phase in Magnesium Alloys

Microstructure and high strain rate superplasticity of <I>in situ</I> composite synthesised from aluminium and nanoZrO<SUB>2</SUB> particles by powder metallurgy