Abstract:Chemical liquid vapor deposition was adopted to fabricate gradient ZrC-SiC modified C/C composites, and the microstructure and ablation resistance were studied. Results displayed the content of SiC decreased from the composites edge to the center but that of ZrC increased, indicating SiC and ZrC ceramics have the gradient distribution in the composites. The gradient composites possessed a low CTE and high thermal conductivity. The low CTE restricted the formation and expansion of defects, which could slow the oxygen diffusion in the composites. The high thermal conductivity could transfer the heat quickly in ablation process, which reduced the heat accumulation on the ablation surface and weakened the thermal erosion. Therefore, the gradient composites possessed an outstanding anti-ablation property at two heat fluxes. Compared with the uniformed distribution composites, the linear and mass ablation rates of the gradient composites decreased by 60.9% and 66.7% at heat flux of 2.38 MW/m(2) and decreased by 55.9% and 67.2% at heat flux of 4.18 MW/m(2). Because of the gradient distribution, porous ZrO2 coating, Zr-2-SiO2 coating and SiO2 coating with SiO2 nanowires were generated on the ablation center, ablation transition zone and ablation edge, respectively. These coatings isolated the sample surface from the flame and inhibited the transport of oxygen into the sample inner.

One-step Preparation and Ablation Behavior of ZrC-SiC-Si Coating for Nose-Shaped ZrC/C Composites with Gradient Pore Structure by Vapor Silicon Infiltration

Ablation Behaviors and Mechanism of ZrC-SiC-Si/SiC-Si Double-Layered Coatings on C/C Composite under Plasma Flame at 3000 °C

Ablation Resistance of SiC–ZrC Coating Prepared by a Simple Two-Step Method on Carbon Fiber Reinforced Composites

Preparation and ablation properties of ZrC-SiC coating for carbon/carbon composites by solid phase infiltration

Ablation resistance of ZrC/SiC gradient coating for SiC-coated carbon/carbon composites prepared by supersonic plasma spraying

Ablation Behavior of ZrC–SiC Coated C/C–ZrC–SiC Composites Prepared by Precursor Infiltration Pyrolysis Combined with Reactive Melt Infiltration

Preparation, Ablation Behavior and Mechanism of C/C-ZrC-SiC and C/C-SiC Composites

Microstructure and Ablation Performance of SiC–ZrC Coated C/C Composites Prepared by Reactive Melt Infiltration

Ablation behavior of C/C-ZrC-SiC composite with gradient distribution of ZrC-SiC ceramics along the thickness

Microstructure and Ablation Property of Gradient ZrC SiC Modified C/C Composites Prepared by Chemical Liquid Vapor Deposition

Ablation Resistance of SiC‐modified ZrC Coating Prepared by SAPS for SiC‐coated Carbon/carbon Composites

Ablation and Heat Insulation Performances of Nose-Shaped ZrC-C Composites with Gradient Pore Structure

Preparation and Ablation Behavior of a ZrB2-SiC Coating-Matrix Integrated C/C Composite

A Multilayer SiC/ZrB2/SiC Ablation Resistance Coating for Carbon/Carbon Composites

Microstructure and Ablation Mechanism of SiC-ZrC-Al2O3 Coating for SiC Coated C/C Composites under Oxyacetylene Torch Test

Microstructure and High Temperature Anti-Ablation Behavior of Cr-modified ZrC Coating for SiC-coated Carbon/carbon Composites

A ZrCSiC/SiC multilayer anti-ablation coating for ZrC modified C/C composites

Ablation Resistance of ZrB2–SiC Coating Prepared by Supersonic Atmosphere Plasma Spraying for SiC-coated Carbon/carbon Composites

Preparation and long-term ablation behavior of Cf-reinforced ZrC-SiC coated C/C-ZrC-SiC composite

Microstructure and Ablation Behavior of SiC Coated C/C–SiC–ZrC Composites Prepared by a Hybrid Infiltration Process

Ablation Mechanism and Properties of ZrB2-ZrC-SiC Coating with Micro-Submicron Reinforced Structure