Abstract:An AI‐driven variable resolution 3.6 to 1.04 GS/s sampling rate Flash ADC achieving 4‐to‐10‐bit resolution with reduced comparator count and better area efficiency. This paper presents an artificially intelligent Flash ADC with enhanced resolution from 4 to 10 bits. Unlike conventional approaches, this artificial intelligence (AI)‐based architecture avoids the use of many number of comparators in the Flash ADC when the ADC's resolution changes from 4 to 10 bits. This work initially gets the digital output of a 4‐bit existing Flash ADC as a training data set and then uses these 4‐bit output bits and sends to resolution enhancement logic (REL) block to vary its resolution without increasing the hardware complexities. After simulation, it is observed that the proposed ADC is of SNR of 24.13 dB for 4‐bit Flash ADC designed in SCL 180 nm CMOS technology and increases from 36.89 to 60.70 dB for 6 to 10‐bit resolution, respectively. The sampling frequency of the proposed architecture ranges from 3.6 to 1.04 GHz for a change in resolution from 4 to 10 bits. The FoM of 235 fJ/conv‐step in the training phase is obtained, and it varies from 56 to 20.3 fJ/conv‐step in the next phase of the testing and the prediction. The estimated area of the proposed 4‐to‐10‐bit variable resolution Flash ADC is 235.23×301.67 μm2.

An artificial intelligence‐based 4‐to‐10‐bit variable resolution Flash ADC with 3.6 to 1.04 GS/s sampling rate

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A 14-Bit Column-Parallel Two-Step SA ADC with On-Chip Scaled Reference Voltages Self-Calibration for CMOS Image Sensor

A 16-Channel 12-Bit Rail-to-rail Successive Approxmation Register ADC for AFEs

A 14-Bit 500-Ms/s Pipelined-SAR ADC in 28-Nm CMOS with Foreground and Background Calibration

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

500 MS/s 4-Bit Flash ADC with Complementary Architecture

A Sub-Sampling 3-Bit 4gs/s Flash ADC in 0.13-&Amp;#x00b5;m CMOS

An 8-Bit 1-Gs/s Flash-Assisted Time-Interleaved SAR ADC

Design of a Low-Power and Low-Area 8-Bit Flash ADC Using a Double-Tail Comparator on 180 nm CMOS Process

A 4-Gs/s 8-Bit Two-Channel Time-Interleaved Folding and Interpolating ADC

A Sub-Sampling 4.25 GS/s 3-Bit Flash ADC with Asymmetric Spatial Filter Response

A 14-Bit 200ms/s Low-Power Pipelined Flash-Sar ADC.

A 100ms/s 5bit Fully Digital Flash ADC with Standard Cells.

A 1.8-V 22-Mw 10-Bit 30-Ms/s Subsampling Pipelined CMOS ADC.

A Column-Parallel Time-Interleaved SAR/SS ADC for Computing in Memory with 2-8bit Reconfigurable Resolution

Comparator with built-in reference voltage generation and split-ROM encoder for a high-speed flash ADC

A Sub-Sampling 4-Bit 1.056-Gs/s Flash ADC with a Novel Track and Hold Amplifier for an IR-WB Receiver

A 14-Bit 250 MS/s IF Sampling Pipelined ADC in 180 Nm CMOS Process.

A 1.4-V 25-Mw 600-Ms/s 6-Bit Folding and Interpolating ADC in 0.13-Μm CMOS

A 14-Bit 4 GS/s Two-Way Interleaved Pipelined ADC with Aperture Error Tunning