Abstract:This paper presents a low-area 8-bit flash ADC that consumes low power. The flash ADC includes four main blocks—an analog multiplexer (MUX), a comparator, an encoder, and an SPI (Serial Peripheral Interface) block. The MUX allows the selection between eight analog inputs. The comparator block contains a TIQ (Threshold Inverter Quantization) comparator, a control circuit, and a proposed architecture of a Double-Tail (DT) comparator. The advantage of using the DT comparator is to reduce the number of comparators by half, which helps reduce the design area. The SPI block can provide a simple way for the ADC to interface with microcontrollers. This mixed-signal circuitry is designed and simulated using 180 nm CMOS technology. The 8-bit flash ADC only employs 128 comparators. The applied input clock is 80 MHz, with the input voltage ranging from 0.6 V to 1.8 V. The comparator block outputs 127 bits of thermometer code and sends them to the encoder, which exports the seven least significant bits (LSB) of the binary code. The most significant bit (MSB) is decided by only one DT comparator. The design consumes 2.81 mW of power on average. The total area of the layout is 0.088 mm2. The figure of merit (FOM) is about 877 fJ/step. The research ends up with a fabricated chip with the design inserted into it.

A 100ms/s 5bit Fully Digital Flash ADC with Standard Cells.

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

500 MS/s 4-Bit Flash ADC with Complementary Architecture

A Sub-1μW 16-Bit Fully Dynamic Zoom ADC Compatible with Free-running and Incremental Modes Using Residue Feedforward and Extended Counting Techniques

A Sub-Sampling 3-Bit 4gs/s Flash ADC in 0.13-&Amp;#x00b5;m CMOS

An 8-Bit 1-Gs/s Flash-Assisted Time-Interleaved SAR ADC

A 3.65 mW 5 bit 2GS/s flash ADC with built-in reference voltage in 65nm CMOS process

A 150 MS/s 10-Bit CMOS Pipelined Subranging ADC with Time Constant Reduction Technique.

A 14-Bit 200ms/s Low-Power Pipelined Flash-Sar ADC.

A 6-Bit 2 GS/s ADC in 65 Nm CMOS

A 6-Bit 150mhz Competition Encoding Flash Analog-To-Digital Converter

A 320ms/s 7-B Flash-Sar ADC with Preamplifier Sharing Technique.

A 6-bit 150 MHz competition encoding flash analog-to-digital converter

A 5-GS/s, 13-mW, 2-channel time-interleaved asynchronous ADC in 65nm CMOS

A CMOS Comparator for 1 GHz 8-Bit Flash A/D Converter

Comparator with built-in reference voltage generation and split-ROM encoder for a high-speed flash ADC

A Flash ADC with Low Offset Dynamic Comparators

A 500-MS/s 9-Bit Time-Domain ADC Using a Nonbinary Successive Approximation TDC

Design of a Low-Power and Low-Area 8-Bit Flash ADC Using a Double-Tail Comparator on 180 nm CMOS Process

A 10bit 100MS/s pipelined ADC with an improved 1.5bit/stage architecture