Abstract:This paper presents a low-area 8-bit flash ADC that consumes low power. The flash ADC includes four main blocks—an analog multiplexer (MUX), a comparator, an encoder, and an SPI (Serial Peripheral Interface) block. The MUX allows the selection between eight analog inputs. The comparator block contains a TIQ (Threshold Inverter Quantization) comparator, a control circuit, and a proposed architecture of a Double-Tail (DT) comparator. The advantage of using the DT comparator is to reduce the number of comparators by half, which helps reduce the design area. The SPI block can provide a simple way for the ADC to interface with microcontrollers. This mixed-signal circuitry is designed and simulated using 180 nm CMOS technology. The 8-bit flash ADC only employs 128 comparators. The applied input clock is 80 MHz, with the input voltage ranging from 0.6 V to 1.8 V. The comparator block outputs 127 bits of thermometer code and sends them to the encoder, which exports the seven least significant bits (LSB) of the binary code. The most significant bit (MSB) is decided by only one DT comparator. The design consumes 2.81 mW of power on average. The total area of the layout is 0.088 mm2. The figure of merit (FOM) is about 877 fJ/step. The research ends up with a fabricated chip with the design inserted into it.

Comparator with built-in reference voltage generation and split-ROM encoder for a high-speed flash ADC

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A 14-Bit Column-Parallel Two-Step SA ADC with On-Chip Scaled Reference Voltages Self-Calibration for CMOS Image Sensor

A Threshold Control Technique for CMOS Comparator Design

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

A Flash ADC with Low Offset Dynamic Comparators

500 MS/s 4-Bit Flash ADC with Complementary Architecture

A 3.65 mW 5 bit 2GS/s flash ADC with built-in reference voltage in 65nm CMOS process

Design of a Low-Power and Low-Area 8-Bit Flash ADC Using a Double-Tail Comparator on 180 nm CMOS Process

A Sub-Sampling 3-Bit 4gs/s Flash ADC in 0.13-&Amp;#x00b5;m CMOS

A CMOS Comparator for 1 GHz 8-Bit Flash A/D Converter

Design Optimization of CMOS CDC Comparators

A 700uW 1GS/s 4-bit Folding-Flash ADC in 65nm CMOS for Wideband Wireless Communications

A 150 MS/s 10-Bit CMOS Pipelined Subranging ADC with Time Constant Reduction Technique.

A 13-Bit 160ms/s Pipelined Subranging-Sar ADC with Low-Offset Dynamic Comparator.

Design of a Comparator with High Speed and High Precision

A novel low-offset dynamic comparator for high-speed low-voltage pipeline ADC

Design of a Strong-Arm Dynamic-Latch based comparator with high speed, low power and low offset for SAR-ADC

An 8 Bit 12 MS/s Asynchronous Successive Approximation Register ADC with an On-Chip Reference

Comparative analysis of the CMOS 180nm technology-based flash ADC designs using dynamic comparator and TIQ comparator

A 6-Bit 700-Ms/s Single-channel SAR ADC with Low Kickback Noise Comparator in 40-Nm CMOS