Abstract:High-speed ADCs are key blocks for ADC-based serial links [1]. The SAR ADC is credited for its high energy efficiency while speedup is a challenge. One limiting factor to the SAR ADC speed is metastability. Traditional solutions have to lengthen the time or speed up the comparator for metastability tolerance, leading to a trade-off between speed and power consumption. A better way to solve metastability is by monitoring the comparison time of the comparator <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$(\mathrm{t}_{\text{comp}})$</tex> and correcting codes. Prior research [2] extracts an additional bit of code from metastability by detecting <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$\mathrm{t}_{\text{comp}}$</tex> . However, since the <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$\mathrm{t}_{\text{comp}}$</tex> is sensitive to the input common-mode voltage (VCM), VCM-based switching is a must to ensure the accuracy of the obtained 1-bit code, which limits the speed of [2] to 700MS/s with 6b resolution. This work acquires two-bit codes from metastability and further accelerates the conversion. An on-chip self-tuning delay is adopted to ensure the accuracy of the extra 2 bits against PVT changes. This work also employs a bi-directional switching logic to speed up conversion and a proper comparator structure to minimize the impact of VCM changes. Thanks to the technique mentioned above, this work achieves 47. 2dB SNDR at 1GSs} with a Nyquist input. The 8b SAR ADC consumes 4. 15mW and 0.0032mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> including on-chip self-tuning delay, leading to a Walden FoM of 22.23fJ/conv.-step.

An 8-Bit 1-Gs/s Flash-Assisted Time-Interleaved SAR ADC

Design of an 8-Channel 12bits 1MSPS SAR ADC

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A 12-Bit 2.32gs/s Pipelined/sar Hybrid ADC with a High-Linearity Input Buffer.

A 7-Bit 3.8-Gs/s 2-Way Time-Interleaved 4-Bit/cycle SAR ADC 16× Time-Domain Interpolation in 28-Nm CMOS

A 4-Mw8-b 600-Ms/s 2-B-per-cycle SAR ADC with a Capacitive DAC

A 5-GS/s 10-b 76-mW Time-Interleaved SAR ADC in 28 nm CMOS

A 6b 800ms/s SAR ADC with Speed-Enhanced SAR Logic and Grouped DAC Capacitors

A 14-Bit 200ms/s Low-Power Pipelined Flash-Sar ADC.

An 8b 1GS/s SAR ADC with Metastability-Based Resolution/Speed Enhancement and Self-Tuning Delay Achieving 47.2dB SNDR at Nyquist Input.

A 7.8 Fj/conversion-Step 9-Bit 400-Ms/s Single-Channel SAR ADC with Fast Control Logic

An 8-b 8-GS/s Time-Interleaved SAR ADC With Foreground Offset Calibration in 28nm CMOS

A 400-Ms/s 12-Bit Voltage-Time Hybrid ADC with a Ping-Pong SAR TDC for Speed Enhancement.

A 1-V 10-Bit 80-Ms/s 1.6-Mw SAR ADC in 65-Nm GP CMOS

A 25-Gs/s 6-Bit Time-Interleaved SAR ADC with Design-for-test Memory in 40-Nm Low-Leakage CMOS

An 8-MS/s 16-bit SAR ADC With Symmetric Complementary Switching and Split Passive Reference Segmentation in 180-nm Process

A 12 Bit 500 MS/s Sub-2 Radix SAR ADC for a Time-Interleaved 8 GS/s ADC in 28 nm CMOS

A 300MHz 10b time-interleaved pipelined-SAR ADC

A low power 11-bit 100 MS/s SAR ADC IP

An 8.2 fJ/conversion-step 9-bit 135 MS/s SAR ADC with redundant methods for acceleration.

A 16-bit 18-MSPS flash-assisted SAR ADC with hybrid synchronous and asynchronous control logic