Abstract:Interfacial shear strength, as an important parameter, is often used to estimate the bonding of the interface. In order to evaluate the interfacial shear strength, pull-out, push-out and multiple-fracture methods have been used. Multiple-fracture method, which is also called single-fiber-composite technique, relies on multiple fragmentation under axial tension of a single fiber embedded in a matrix. However, it is not easy to examine the number of the multiple fragmentation. On the other hand, acoustic emission (AE) method, which is an effective one to monitor the failure process in structure material, has been applied to polymer or metal matrix composites. The authors have examined the micro fractures, such as yielding of the matrix, failing of the interface and multiple breaking of the fibers in SiC/Al composite by using acoustic emission method. In that work, it was clear that the number of the broken fiber in the composite was in correspondence with AE events when amplitude is over 100dB. In this study, three kinds of single fiber SiC/Al composites with different interfacial bonding strength were fabricated by the hot press processes. The number of the multiple broken fiber were evaluated by acoustic emission method during the tensile test, and then the interfacialmore » shear strengths were calculated. Further, the number was also investigated by extracting the multiple fragmentation in the composite, and counting the number of the load drop on the load-time curve after the tensile test. Finally, both the number of the multiple broken fiber and the interfacial shear strength obtained from AE and the other two methods were compared and discussed.« less

Mechanical property and failure mechanism of coated Al2O3f/SiO2 composites by acoustic emission technology (AE)

Damage mechanism of Al2O3f/Al2O3 composites by acoustic emission technology

Analysis of interfacial shear strength of SiCAl composite by acoustic emission method

Effect of Ultrasonic Vibration Tensile on the Mechanical Properties of High-Volume Fraction SiCp/Al Composite

Damage Analysis of a SiCf/SiC Ceramic Matrix Composite under Stepwise Fatigue Loading with Acoustic Emission

Damage mechanism identification and failure behavior of 2D needle-punched SiC f /SiC composites based on acoustic emission and digital image correlation

Solidified Microstructure of SiCp/Al Composites Bonds under Ultrasonic Vibration and Their Fracture Characteristics

Mechanical properties of the alumina-coated Al18B4O33w/6061Al composites

Microscopic impacts of ultrasonic vibration on interfacial strength of SiCp/Al composites

Damage and failure analysis of a SiCf/SiC ceramic matrix composite using digital image correlation and acoustic emission

Acoustic Emission Monitoring of the Tensile Behavior of a HVOF-sprayed NiCoCrAlYCe Coating

Fabrication and Thermal Stability of Continuous Carbon Fiber Reinforced Alumina Matrix Composites via Sol–Gel Process

Microstructure and Tensile Properties of Yttria Coated-Alumina Particulates Reinforced Aluminum Matrix Composites

Tensile Strength of Al_2O_3(sf)/Al Composites and Its Influence Factors

Tensile deformation behavior of a sub-micrometer Al2O3/6061Al composite

Mechanical Properties Testing and Failure Mechanism Analysis of 3D Woven Carbon/epoxy Composites

Microstructure and mechanical properties of Al2O3/Al2O3 composite densified through a slurry infiltration and sintering process

High-temperature properties of Al 2 O 3 /SiO 2 composites

Finite Element Simulation Study of Ultrasonic Vibration-Assisted Tensile High-Volume Fraction SiCp/Al Composite

Microstructure and Mechanical Properties of Unidirectional, Laminated Cf/SiC Composites with α-Al2O3 Nanoparticles as Filler

Preparation and mechanical performance of ductile Csf/Al2O3-BN composites-Part 2: Effects of fiber contents and ablation properties