Analysis of interfacial shear strength of SiCAl composite by acoustic emission method

Yun Lu,Mitsuji Hirohashi

DOI: https://doi.org/10.1016/S1359-6462(97)00429-6

IF: 6.302

1997-01-01

Scripta Materialia

Abstract:Interfacial shear strength, as an important parameter, is often used to estimate the bonding of the interface. In order to evaluate the interfacial shear strength, pull-out, push-out and multiple-fracture methods have been used. Multiple-fracture method, which is also called single-fiber-composite technique, relies on multiple fragmentation under axial tension of a single fiber embedded in a matrix. However, it is not easy to examine the number of the multiple fragmentation. On the other hand, acoustic emission (AE) method, which is an effective one to monitor the failure process in structure material, has been applied to polymer or metal matrix composites. The authors have examined the micro fractures, such as yielding of the matrix, failing of the interface and multiple breaking of the fibers in SiC/Al composite by using acoustic emission method. In that work, it was clear that the number of the broken fiber in the composite was in correspondence with AE events when amplitude is over 100dB. In this study, three kinds of single fiber SiC/Al composites with different interfacial bonding strength were fabricated by the hot press processes. The number of the multiple broken fiber were evaluated by acoustic emission method during the tensile test, and then the interfacialmore » shear strengths were calculated. Further, the number was also investigated by extracting the multiple fragmentation in the composite, and counting the number of the load drop on the load-time curve after the tensile test. Finally, both the number of the multiple broken fiber and the interfacial shear strength obtained from AE and the other two methods were compared and discussed.« less