Abstract:The CZTS/ZnO0.375S0.625 interface has less harmful interface state, small conduction band offset and band bending. Moreover, its band alignment belongs to the staggered Type‐II heterojunction, and its built‐in electric field is in the same direction as the carrier migration, which is very favorable for the efficient separation and fast transfer of photogenerated carriers. The current low conversion efficiency of Cu2ZnSnS4 (CZTS)‐based thin film solar cells is mainly blamed on the high carrier recombination via interface states at the absorber‐buffer. In this work, ZnO1−xSx solid solution is exploited as the potential buffer layer materials to solve this issue by using density functional theory calculations. With the varying of solid solubility, the lattice constant of ZnO1−xSx solid solution follows the first‐order Vegard's Law, while its bandgap follows the second‐order Vegard's Law. Based on the systematical analysis of crystal structure and electronic properties of ZnO1−xSx solid solution, ZnO0.375S0.625 is screened as the optimal buffer layer material for CZTS‐based thin film solar cells, owing to the suitable bandgap (2.33 eV) and the smallest lattice mismatch (<7%). The CZTS/ZnO0.375S0.625 interface has less harmful interface state, small conduction band offset (−0.02 eV) and band bending (−0.23 eV). Moreover, its band alignment belongs to the staggered Type‐II heterojunction, and its built‐in electric field is in the same direction as the carrier migration, which is very favorable for the efficient separation and fast transfer of photogenerated carriers. Therefore, these interface features and effects of CZTS/ZnO0.375S0.625 heterojunction can significantly boost the photovoltaic performance of CZTS‐based thin film solar cells.

9.3% Efficient Flexible Cu2ZnSn(S,Se)4 Solar Cells with High‐Quality Interfaces Via Ultrathin CdS and Zn0.8Sn0.2O Buffer Layers

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

ZnO1−xSx Solid Solution as Potential Buffer Layer Materials for Cu2ZnSnS4‐Based Thin Film Solar Cells: Structural and Interfacial Properties

Achieving 21.4% Efficient CdSeTe/CdTe Solar Cells Using Highly Resistive Intrinsic ZnO Buffer Layers

CdTe thin film solar cells with a SnTe buffer layer in back contact

Role of zinc tin oxide passivation layer at back electrode interface in improving efficiency of Cu2ZnSn(S,Se)4 solar cells

CdS(In)/CZTSSe bandgap alignment engineering for performance enhancement of solar cells without ZnO layer

Sputtering Deposited and Energy Band Matched ZnSnN2 Buffer Layers for Highly Efficient Cd‐Free Cu2ZnSnS4 Solar Cells

Toward High Efficient Cu2 ZnSn(Sx ,Se1- x )4 Solar Cells: Break the Limitations of VOC and FF

Cadmium‐Free Kesterite Thin‐Film Solar Cells with High Efficiency Approaching 12%

Optimizing the window layer for achieving over 10% efficient Cu2ZnSn(S,Se)4 solar cells

Further studies in body fluid metabolism. II. The relative efficacy in man of sodium bicarbonate and sodium lactate as alkalizing compounds, and of ammonium chloride and hydrochloric acid as acidifying compounds.

Realizing zinc-doping of CdS buffer layer via partial electrolyte treatment to improve the efficiency of Cu2ZnSnS4 solar cells

10.24% Efficiency of Flexible Cu2 ZnSn(S,Se)4 Solar Cells by Pre-Evaporation Selenization Technique

Boost the efficiency of Cu2ZnSn(S,Se)4 solar cell by using Mn2+ induced ultra‐thin CdS buffer layer

Interface Recombination of Cu 2 ZnSnS 4 Solar Cells Leveraged by High Carrier Density and Interface Defects

Influence of Cd0.6Zn0.4S buffer layer on the band alignment and the performance of CZTS thin film solar cells

N‐Type Surface Design for p‐Type CZTSSe Thin Film to Attain High Efficiency

High-Efficiency Cu(In,Ga)Se₂ Thin Film Solar Cells Using ZnS and CdS Buffer Layers

In-doping collaboratively controlling back interface and bulk defects to achieve efficient flexible CZTSSe solar cells

Surprising Efficiency Enhancement of Cu 2 ZnSn(S,Se) 4 Solar Cells with Abnormal Zn/Sn Ratios