Abstract:The tetraethyl orthosilicate is introduced into CZTSSe precursor solution as a source of silicon to partially substitute Sn with Si for fabrication of CZTSSe device, giving rise to favorable functions in terms of passivating SnZn defects and optimizing energy level alignment. Consequently, the CZTSSe device with 7% Si substitution acquires a PCE of 13.02% due to the enhancement of Voc. The SnZn defect passivation and heterojunction interface energetics‐modification are crucial for further improvement of open‐circuit voltage (Voc) and efficiency of Cu2ZnSn(S,Se)4 (CZTSSe) solar cells. Herein, a simple but effective cation substitution strategy is reported to promote the performance of CZTSSe devices by simultaneously modifying the absorber and heterojunction interface. This is achieved by introducing the organic silicon salt C8H20O4Si into CZTSSe precursor solution as a source of silicon to partially substitute Sn with Si. Systematic studies reveal that there are two mechanisms synergistically contributing to the increase of efficiency: 1) This strategy can passivate the undesired SnZn defect in CZTSSe absorber more efficiently, leading to at least one order of magnitude lower SnZn defect density and beneficial carrier transport properties; 2) After Si incorporation, the conduction band minimum of the CZTSSe is upshifted, thus enlarging the bandgap, which ultimately optimizes the energy level structure at the CdS/CZTSSe interface and reduces interfacial energy loss by decreasing the carrier transport barrier. Consequently, the CZTSSe device with 7% Si substitution delivers a satisfactory efficiency of 13.02% owing to an increase in Voc. It is hoped the Si substitution strategy reported here can provide inspiration for developing advanced CZTSSe devices with broad application prospects.

Optimizing the window layer for achieving over 10% efficient Cu2ZnSn(S,Se)4 solar cells

Formation of Alloyed Cu2Cox Zn1-x Sn(S,Se)4 Absorption Layer and Its Application in Solar Cells

Formation of Alloyed Cu2CoxZn1-xSn(S,Se)4 Absorption Layer and Its Application in Solar Cells.

Role of zinc tin oxide passivation layer at back electrode interface in improving efficiency of Cu2ZnSn(S,Se)4 solar cells

CdS(In)/CZTSSe bandgap alignment engineering for performance enhancement of solar cells without ZnO layer

An ITO‐Free Kesterite Solar Cell

Doping Behavior of Zn in CdS and Its Effect on the Power Conversion Efficiency of the Cu2ZnSn(S, Se)4 Solar Cell

Surprising Efficiency Enhancement of Cu 2 ZnSn(S,Se) 4 Solar Cells with Abnormal Zn/Sn Ratios

The enhancement of CZTSSe solar cell performance through active construction of the double-layer absorber

Toward High Efficient Cu2 ZnSn(Sx ,Se1- x )4 Solar Cells: Break the Limitations of VOC and FF

Performance Improvement of CZTSSe Solar Cell by using Mg-doped ZnO as Window Layer

Towards a high efficient Cd-free double CZTS layers kesterite solar cell using an optimized interface band alignment

Optimized grain growth for efficient solution-processed Bi-doped Cu2ZnSn(S,Se)4 thin film solar cells via spin-coated layers adjustment and two-step selenization

N‐Type Surface Design for p‐Type CZTSSe Thin Film to Attain High Efficiency

Electrical barriers and their elimination by tuning (Zn,Mg)O composition in Cu(In,Ga)S2: Systematic approach to achieve over 14% power conversion efficiency

Achieving 21.4% Efficient CdSeTe/CdTe Solar Cells Using Highly Resistive Intrinsic ZnO Buffer Layers

Passivating SnZn Defect and Optimizing Energy Level Alignment via Organic Silicon Salt Incorporation toward Efficient Solution‐Processed CZTSSe Solar Cells

Beyond 10% Efficient CZTSSe Thin-Film Solar Cells Fabricated by a Two-Step CdS Deposition Process

Suppressing Element Inhomogeneity Enables 14.9% Efficiency CZTSSe Solar Cells

Targeting the imperfections at the ZnO/CsPbI2Br interface for low-temperature carbon-based perovskite solar cells

Back Contact Engineering to Improve CZTSSe Solar Cell Performance by Inserting MoO3 Sacrificial Nanolayers