Abstract:Hypoeutectic Al-Mg 2 Si alloys are distinguished as premier structural materials for transportation purposes, celebrated for their superior ductility and exceptional corrosion resistance. Enhancing strength and evaluating castability are critical for broadening their applicability. This study meticulously explores the influence of copper (Cu) on the mechanical attributes and castability of AlMg5.4Si2 alloys through detailed tensile testing and casting experiments utilizing constrained rod casting and spiral molds. Our findings reveal that increasing Cu levels refine grain size and condense the spacing of secondary dendrite arms, although this leads to a diminishing effect on the beneficial modifications introduced by bismuth (Bi). Specifically, the addition of 0.1 wt% Cu elevates the yield strength and ultimate tensile strength by 19 and 31 MPa, respectively. However, when Cu concentration exceeds 0.1 wt%, there is a marked degradation in mechanical properties due to the formation of the agglomerated S-Al 2 CuMg phase. Furthermore, the Cu enrichment escalates the hot tearing sensitivity and diminishes fluidity, predominantly due to an expanded freezing temperature range and an increased propensity for dendritization. The comparisons between experimental castability outcomes, numerical simulations and theoretical benchmarks have validated the predictive potential of these methodologies. These insights afford a nuanced comprehension of the multifaceted impacts of microalloying on the Al-Mg 2 Si cast alloys, and pave the way for compositional refinements in industrial practices. Critically, this research not only underscores the delicate balance required in alloy design, but also opens new pathways for enhancing the performance of transportation materials through strategic microalloying.

Effects of Cu Content on Microstructure and Mechanical Properties of Rheo-Diecasting Al-6Zn-2Mg-xCu Alloys

Role of Cu on the Mechanical Properties and Microstructures Evolution of Al-xCu-1Li-0.4Mg–1Zn-0.1Zr Alloys

Effect of Ti on Microstructure and Mechanical Properties of Die-Cast Al-Mg-Zn-Si Alloy

Effect of Low Cu Content and Heat Treatment on the Microstructure and Mechanical Properties of High-Vacuum Die-Cast AlSiMgMn Alloys

Microstructural evolution and mechanical properties of cast Al‐2.6Li‐2.8Mg‐(0.5, 1.4)Cu‐0.2Zr‐0.2Sc alloys during heat treatment

Evaluation of Cu Content on Mechanical Performance and Castability of AlMg5.4Si2 Alloy

The microstructures and mechanical properties of a highly alloyed Al-Zn-Mg-Cu alloy: The role of Cu concentration

Effects of Cu content on the microstructure, mechanical property, and hot tearing susceptibility of die casting hypereutectic Al–22Si–0.4Mg alloy

Effect of Cu addition on microstructures and tensile properties of high-pressure die-casting Al-5.5Mg-0.7Mn alloy

Effects of Mg content on microstructure and mechanical properties of low Zn-containing Al−xMg−3Zn−1Cu cast alloys

Effect of Cu Additions on Microstructure, Mechanical Properties and Hot-Tearing Susceptibility of Mg-6Zn-0.6Zr Alloys

Effects of Adding Trace Modification Elements and Heat Treatment on the Strength and Toughness of AlSi8Cu2MgMn Alloy

Effect of Cu Content on Microstructure and Mechanical Properties of Al-Cn-0.4Mg-0.6Ag Alloy

Study on the effect of enhanced magnesium and copper contents on microstructure and property of Al-Zn-Mg-Cu alloys with high zinc element content during fabrication processes

Effects of Copper Content and Thermo-Mechanical Treatment on Microstructure and Mechanical Properties of AlMgSi(Cu) Alloys

Effect of Cooling Rate on Microstructure and Mechanical Properties of an Al-5.0Mg-3.0Zn-1.0Cu Cast Alloy

Microstructural characteristics and mechanical properties of cast Al-3Li-xCu-0.2Zr alloy

Effect of heat treatments on microstructure and mechanical properties of sand cast Al–2Li–2Cu–0.5Mg–0.2Sc–0.2Zr alloy

Effect of Cu on Microstructure, Mechanical Properties, and Texture Evolution of ZK60 Alloy Fabricated by Hot Extrusion−shearing Process

Effects of Zn, Mg, and Cu Content on the Properties and Microstructure of Extrusion-Welded Al-Zn-Mg-Cu Alloys

Microstructure and mechanical properties of squeeze-cast Al−5.0Mg−3.0Zn−1.0Cu alloys in solution-treated and aged conditions