Abstract:Hypoeutectic Al-Mg 2 Si alloys are distinguished as premier structural materials for transportation purposes, celebrated for their superior ductility and exceptional corrosion resistance. Enhancing strength and evaluating castability are critical for broadening their applicability. This study meticulously explores the influence of copper (Cu) on the mechanical attributes and castability of AlMg5.4Si2 alloys through detailed tensile testing and casting experiments utilizing constrained rod casting and spiral molds. Our findings reveal that increasing Cu levels refine grain size and condense the spacing of secondary dendrite arms, although this leads to a diminishing effect on the beneficial modifications introduced by bismuth (Bi). Specifically, the addition of 0.1 wt% Cu elevates the yield strength and ultimate tensile strength by 19 and 31 MPa, respectively. However, when Cu concentration exceeds 0.1 wt%, there is a marked degradation in mechanical properties due to the formation of the agglomerated S-Al 2 CuMg phase. Furthermore, the Cu enrichment escalates the hot tearing sensitivity and diminishes fluidity, predominantly due to an expanded freezing temperature range and an increased propensity for dendritization. The comparisons between experimental castability outcomes, numerical simulations and theoretical benchmarks have validated the predictive potential of these methodologies. These insights afford a nuanced comprehension of the multifaceted impacts of microalloying on the Al-Mg 2 Si cast alloys, and pave the way for compositional refinements in industrial practices. Critically, this research not only underscores the delicate balance required in alloy design, but also opens new pathways for enhancing the performance of transportation materials through strategic microalloying.

Evaluation of Cu Content on Mechanical Performance and Castability of AlMg5.4Si2 Alloy

Effects of Cu Addition on the Microstructure and Properties of the Al–Mn–Fe–Si Alloy

Effects of Cu Content and Cu/Mg Ratio on the Microstructure and Mechanical Properties of Al–Si–Cu–Mg Alloys

Effects of Cu content on the microstructure, mechanical property, and hot tearing susceptibility of die casting hypereutectic Al–22Si–0.4Mg alloy

Effect of Ti on Microstructure and Mechanical Properties of Die-Cast Al-Mg-Zn-Si Alloy

The Influence of Cu Content and Mg/Si Ratio on the Strength and Formability in Al-Mg-Si-Cu Alloys

Microstructural refinement and tensile properties enhancement of Al-10Mg2Si cast alloys by copper addition

Role of Cu on the Mechanical Properties and Microstructures Evolution of Al-xCu-1Li-0.4Mg–1Zn-0.1Zr Alloys

Effect of Cu addition on microstructures and tensile properties of high-pressure die-casting Al-5.5Mg-0.7Mn alloy

Influences of Cu Content on the Microstructure and Strengthening Mechanisms of Al-Mg-Si-<i>x</i>Cu Alloys

Microstructure and Mechanical Properties of Cast Al-Li-Mg Alloy: Role of Cu Addition and Heat Treatment

Effects of Cu Content and Heat Treatment Process on Microstructures and Mechanical Properties of Al−Si−Mg−Mn−xCu Cast Aluminum Alloys

Investigating the role of Cu, Zr and V on the evolution of microstructure and properties of Al-Si-Mg cast alloys

Effects of Cu on Mechanical Properties and Electircal Conductivity of AlSi10.5 Alloy

Effects of Cu Content on Microstructure and Mechanical Properties of Rheo-Diecasting Al-6Zn-2Mg-xCu Alloys

Experimental Investigation and Simulation Assessment on Fluidity and Hot Tearing Susceptibility of Al-Li-Cu-X Alloy: the Role of Microalloying Elements

The microstructures and mechanical properties of a highly alloyed Al-Zn-Mg-Cu alloy: The role of Cu concentration

The effect of Si addition on the microstructure and tensile properties of casting Al-5.0Cu-0.6Mn-1.2Fe alloys

Effect of copper addition on mechanical properties and microstructures of LM25 cast alloys

Effect of Cu Content and Zn/Mg Ratio on Microstructure and Mechanical Properties of Al–Zn–Mg–Cu Alloys

The Effect of Si Content on the Microstructure and Mechanical Properties of Al–1.2Mg–xSi–1.2Cu–0.6Mn Cast Alloy