Correction to Pore Characteristics and Fractal Dimension Analysis of Tectonic Coal and Primary Structure Coal: A Case Study of Sanjia Coal Mine in Northern Guizhou.

Huaying Lin,Shixiang Tian,Anjun Jiao,Zuoyong Cao,Kai Song,Yihuai Zou

DOI: https://doi.org/10.1021/acsomega.2c05911

IF: 4.1

2022-01-01

ACS Omega

Abstract:[This corrects the article DOI: 10.1021/acsomega.2c02222.].

What problem does this paper attempt to address?

Correction to Pore Characteristics and Fractal Dimension Analysis of Tectonic Coal and Primary Structure Coal: A Case Study of Sanjia Coal Mine in Northern Guizhou

Huayi Lin,Shixiang Tian,A. Jiao,Zuoyong Cao,Kai Song,Yihuai Zou

DOI: https://doi.org/10.1021/acsomega.2c05911

IF: 4.1

2022-01-01

ACS Omega

Abstract:[This corrects the article DOI: 10.1021/acsomega.2c02222.].
Correction: Zhang et al. Evolution Mechanism of Microscopic Pore System in Coal-Bearing Marine–Continental Transitional Shale with Increasing Maturation. Minerals 2023, 13, 1482

Jizhen Zhang,Wei Lin,Mingtao Li,Jianguo Wang,Xiao Xiao,Yu Li,Xiaochan Zhang

DOI: https://doi.org/10.3390/min14121235

IF: 2.5

2024-12-05

Minerals

Abstract:Minerals, Vol. 14, Pages 1235: Correction: Zhang et al. Evolution Mechanism of Microscopic Pore System in Coal-Bearing Marine–Continental Transitional Shale with Increasing Maturation. Minerals 2023, 13, 1482 Minerals doi: 10.3390/min14121235 Authors: Jizhen Zhang Wei Lin Mingtao Li Jianguo Wang Xiao Xiao Yu Li Xiaochan Zhang In the original publication [...]

geochemistry & geophysics,mineralogy,mining & mineral processing
Microstructure Characteristics of Tectonic Coal and Primary Coal: A Case Study of Guizhou, China

Cong Feng,Xijian Li,Enyu Xu,Hao Sui,Feng Xue,Honggao Xie

DOI: https://doi.org/10.1007/s11053-023-10274-5

IF: 5.609

2023-01-01

Natural Resources Research

Abstract:The pore structure of coal has a great influence on the exploitation of coalbed methane. The primary coal and tectonic coal of the Faer Coal Mine and Wenjiaba Coal Mine in Guizhou, China, were selected for low-temperature liquid nitrogen and high-pressure mercury injection experiments. Based on the Frenkel–Halsey–Hill fractal model and multifractal model, combined with nano-CT system, the difference between primary structural coal and tectonic coal and their relationships with fractal dimension were analyzed. According to the results, coal can increase its pore volume and surface area by tectonic action. From the perspective of pore volume and surface area, micropores occupy the main part. According to the pore volume and pore surface area of micropores, that of primary structural coal was lower than that of tectonic coal. For the studied coal samples, their pores have fractal characteristics and complex structure. It can be seen from the fractional dimension that that of tectonic coal was higher than that of primary structure coal, indicating that the microscopic pore structure of coal tends to be complex after tectonic action. According to the results of multifractal and nano-CT analysis, the Hausdorff dimension of tectonic coal was slightly smaller than that of primary structure coal, but the multifractal parameter value was higher than that of primary structure coal. After tectonic action, the connected pores of coal increased by 142.86
Pore characteristics and fractal characterization variability of typical middle- and high-rank coal reserves: A case study of middle- and high-rank coal samples in western Guizhou

Yi Lou,Yuliang Su,Wei Gao,Wendong Wang,Wei Xiong,Jie Chen,Peng Xia

DOI: https://doi.org/10.3389/fenrg.2022.981530

IF: 3.4

2022-09-06

Frontiers in Energy Research

Abstract:This article focused on the study of pore structure characteristics of Songhe and Linhua coal samples based on mercury injection experiments and high-pressure isothermal adsorption experiments. The results show that the pore structure of coal samples in the two mining areas is obviously different under the influence of metamorphic degree. The pores of Songhe mine coal samples, which are characteristic of middle-rank coal reserves, are predominantly open cylindrical pores with good connectivity to medium-to-large pores but poor absorption capacity. The tiny and medium pores of Linhua coal samples, which are characteristic of high-level coal reserves, have poor connectivity, dominated by conical pores with mostly closed and semi-closed pores. The pore size distribution of the middle-rank coal sample is multi-peaked, with better developed pore sizes, while the pore size distribution of the Linhua coal sample is bi-peaked, with micro and small pores developed. The pore fractal shape of high-rank coal reserves is higher than that of middle-rank coal reserves, and the complexity of permeable pore space and diffusive pore space of high-order coal reservoirs is higher than that of middle-order coal reservoirs.

energy & fuels
Correction to “Wetting Mechanism and Experimental Study of Synergistic Wetting of Bituminous Coal with SDS and APG1214”

Liying Sun,Shaocheng Ge,Deji Jing,Shuo Liu,Xi Chen

DOI: https://doi.org/10.1021/acsomega.2c01252

IF: 4.1

2022-01-01

ACS Omega

Abstract:[This corrects the article DOI: 10.1021/acsomega.1c05422.].
Advanced characterization of seepage pores in deformed coals based on micro-CT

SONG Xiao-xia,LI Wei,FENG Zeng-chao,KANG Zhi-qin,LI Yan-jun,XIANG Jian-hua

2013-01-01

Abstract:The advanced quantitative characterization of seepage pores of deformed coals in Zhongliangshan Southern coalmine,Chongqing,was studied by mico-CT.The results show that the pore diameter of deformed coals is commonly less than 10μm,but the pores distribution characteristics are different among various types of deformed coals.Pore numbers and areal porosity increase with the intensity of tectonic deformation.For primary-cataclastic coal,the primary pore is the major pore types,and interbreccia pores from angular particles increase in cataclastic coal with stress increasing. For granulated coal,intergranular pores and micro-fractures are well-developed,and mean pore diameter increases. The intense shear failure resulted in the brittle-ductile deformation,including local wrinkle structure and dusty mylonite in flake coal.Coal particles filled in some fractures and pores,which results in the reduction of mean pore diameter. The spatial visualization of pores indicate that porosity,pore surface area,pore volume and the distribution of max connective pores group increases along with stress strengthen.
Pore structure in tectonically deformed coals by small angle X-ray scattering

SONG Xiao-xia,TANG Yue-gang,LI Wei,ZENG Fan-gui,XIANG Jian-hua

DOI: https://doi.org/10.13225/j.cnki.jccs.2013.1932

2014-01-01

Abstract:In order to get deep insight into the pore structure of tectonically deformed coals at different deformation extents,pore parameters( pore size and volume,surface area and surface fractal dimension) of coals from Zhongliangshan Southern Coal Mine,Chongqing,were investigated by means of small angle X-ray scattering( SAXS) combined with low temperature nitrogen adsorption. The results from SAXS indicate that the scattering intensity and micropore volume increases,the most-probable pore diameter decreases,while the surface fractal dimensions increases with the increase in deformation extent. Similar results were obtained from low temperature nitrogen adsorption experiments. However,the surface area measured from SAXS is somehow 1-2 orders of magnitude higher than that from low temperature nitrogen adsorption. This is possibly due to the different testing principles followed by these two testing methods.
Fractal structure of microfractures and characteristics of porosity and permeability in cataclastic coals

CHEN Weiyin,JIANG Bo,QU Zhenghui,LI Ming,DOU Xinzhao

DOI: https://doi.org/10.3969/j.issn.1001-1986.2012.02.008

2012-01-01

Abstract:Based on the microscopy and the mercury intrusion tests of 9 coal samples from Faer coal mine in Guizhou Province,we analyzed the characteristics of micro deformation and microfracture in tectonic coal,and conducted research on permeability of pore.Results show that information dimension of microfractures in cataclastic coal ranges at least from 1.2 to 1.8;Based on the index of the information dimension we can classify the cataclastic coals into 3 categories,with their ranges of dimension as follows: 1.2～1.4,1.4～1.7,and 1.7～1.8;As for the pore system,brittle tectonic deformation increased the pore volume of macropore and mesopore.We also find that the greater the tectonic deformation is,the better the permeability of the tectonic coal of brittle series is.
Micro‐structure analysis on fracture network in high rank coals

Shuaifeng Lyu,Xiaojun Chen,Rui Li,Shengwei Wang,Jie Liu,Penglei Shen

DOI: https://doi.org/10.1029/2021ea001780

IF: 3.68

2021-07-14

Earth and Space Science

Abstract:Microfractures in the coal matrix have complex spatial structure because of the joint effects of coalification and tectonism. The accurate modeling and characterization of microfractures directly affect mechanism analysis of coal rock fracturing and mining. In this study, taking the high-rank coal in the north of Qinshui Basin, structural characteristics of microfracture in intact and tectonic coals were analyzed systematically using 2D thin section, 3D micro-CT modeling and mercury intrusion based on digital image analysis and fractal theory. Result indicates that response sensitivity of fractal parameters obtained from different methods to microfractures from two types of coal structures is different greatly. Single fractal dimension ( D f ) in tectonic coal is higher than that of intact coal. Specially, for 2D thin sections, the indicative effect on the D f of manually-corrected images is better than that of automatically-extracted and linear ones. D f has a positive correlation with the pixel-based microfracture porosity, as well as generalized fractal parameters. Moreover, microfracture permeability based on the Cubic-Law increases with the increase of D f . For 3D micro-CT modeling, the classical Watershed algorithm cannot segment the spatial microfracture network, which however can be segmented and characterized by the self-developed FracSC3D program. Spatial microstructural parameters including volume, surface and length at three-axis directions meet bi-fractal characteristics. Specially, for 2D micro-CT slices, with the increase of porosity, the multifractal spectrum width Δ α also increased. Besides, the fractal parameter based on Menger model from mercury intrusion experiment can act as a good indicator for identifying microfractures, flow pores and diffusion pores. This article is protected by copyright. All rights reserved.

geosciences, multidisciplinary,astronomy & astrophysics
Correction to "Proppant Settlement and Long-Term Conductivity Calculation in Complex Fractures"

Xiaopeng Wang,Xiaocheng Zhang,Ming Zhang,Qilong Zhang,Pinghua Dong,Haibo Ding,Xiaoqiang Liu

DOI: https://doi.org/10.1021/acsomega.4c06552

IF: 4.1

2024-08-21

ACS Omega

Abstract:[This corrects the article DOI: 10.1021/acsomega.3c08594.].
Fractal Characteristics of Nano-Pore Structure in Tectonically Deformed Coals in Hancheng Mining Area

Xiaohu Zhang

2014-01-01

Abstract:The nano-pore structure can be changed under tectonic deformation, and the different deformation mechanisms influence also the pore structure in various degrees. Pore structure of coals is very inhomogeneous, and is exactly described difficultly by the conventional experimental methods, but the fractal theory provides a quantitative method for describing the complexity of the pore structure. The influence of tectonic deformation on nano-pore structure of different deformed coals collected from Hancheng mining area in Weibei coalfield was quantitatively analyzed by nitrogen gas adsorption experiment based upon the fractal Frenkel-Halsey-Hill(FHH) theory. The results show that ductile deformed coals with higher pore fractal dimensions have higher heterogeneity and more complicated pore structure compared to brittle deformed coals, resulting in higher capillary condensation and prominent adsorption hysteresis. Fractal dimensions of tectonic coal increase with reduction of the average pore diameter and the increase of meso-pore content, indicating the stronger the tectonic deformation, the smaller the average pore size, the more complicated the pore structure. With the stress strengthening, fractal dimension shows an increasing trend. Thus, the fractal dimension can be used as an indicator of the deformation degree of the nano-pore structure.
Experimental Investigation on Coal Pore and Fracture Characteristics Based on Fractal Theory

Haijun Guo,Liang Yuan,Yuanping Cheng,Kai Wang,Chao Xu

DOI: https://doi.org/10.1016/j.powtec.2019.02.026

IF: 5.64

2019-01-01

Powder Technology

Abstract:Coal is an extremely complex porous medium. To study the pore and fracture characteristics of coal, samples from northeastern China were collected and crushed into eight kinds of particle sizes to conduct the experiments using a combination of basic physical parameters, mercury intrusion porosimetry (MIP) and N-2 (77 K)/CO2 (273 K) adsorption pore structure characterization. At the same time, the scale characteristics of the coal pores and fractures were analyzed by fractal theory. The results indicate that the pores and fractures in coal become increasingly simpler and are more favorable for gas storage and migration during the crushing of the coal samples. The fractal curves of the pores and fractures in coal samples with different particle sizes determined from MIP were all divided into two parts by an inflection point. According to fractal theory, the width that corresponds to the inflection points of the fractal curves are considered to be the critical value for determining the pores and fractures in coal. On this basis, the matrix porosity and the fracture porosity in coal were obtained by combining the data from the MIP and N-2 (77 K)/CO2 (273 K) adsorption. It is believed that this study is of great significance to analyze the coal permeability evolution law affected by the dual-porosity coal structure characteristics. (C) 2019 Elsevier B.V. All rights reserved.
Correction: Catalytic conversion of carbon dioxide (CO2) using coal-based nano-carbon materials

Hongchao Luo,Xinjuan Liu

DOI: https://doi.org/10.1039/d4ra90103g

2024-09-20

Abstract:[This corrects the article DOI: 10.1039/D4RA03407D.].
Study on Types of Tectonic Coal from Xutuan Coal Mine in Huaibei Coalfield and Its Pore Characteristics

王林杰,常溪溪,亓宁,唐润池,汪吉林

DOI: https://doi.org/10.13347/j.cnki.mkaq.2017.04.001

2017-01-01

Abstract:Tectonic coal in the stndy area was observed by hand specimen and electron microscope,and the diffcrcnces were significant between different types of tectonic coal in macroscopic and microscopic deformation characteristics.The fractal theory is used to study the pore characteristics of tectonic coal based on the experimental data of mercury intrusion.The results show that the total pore volume and porosity increase with the increase of deformation degree,especially in the ductile deformation stage,but the pore connectivity is gradually getting worse.The response of pore characteristics to the deformation of the tectonic becomes weaker with the decrease of pore size.Fractal dimension based on pressure mercury data can only represent the characteristics of the pore structure of the macropore and mesopore effectively.The fractal dimension increases with the increase of the deformation degree of coal,and the pore structure becomes more diversified and complicated,macropore volume or the proportion of seepage holes shows positive linear correlation with fractal dimension,but mesopore volume shows positive exponential correlation with fractal dimension.
Study on Pore Fractal Characteristics of High-rank Coal Reservoirs in Southern Qinshui Basin

An Shikai,Sang Shuxun,Li Yangmin,Li Mengxi,Liu Huihu,Zhang Jianguo,Li Junjun

DOI: https://doi.org/10.3969/j.issn.1674-1803.2011.02.04

2011-01-01

Abstract:Based on mercury porosimetry and coal lithotype and quality analytical results of 20 high-rank coal samples from southern Qinshui Basin,discussed pore fractal dimension computation method and analyzed fractal characteristics of pore.The study has demonstrated that,high-rank coal pore fractal scale-free range is 50nm~100μm;pore fractal dimension 2.94~3.21;negative correlation is existed between pore fractal dimension and degree of coal metamorphism,porosity,macropore ratio and volume median aperture,positive correlation with mesopore ratio,sorptive pore ratio,efficiency of mercury withdrawal and ash yield;while fixed carbon content,vitrinite mass fraction,volatile matter yield and Langmuir volume to take the pore fractal dimension 3.05 as inflexion present double U-shaped or reversed double U-shaped transformations.Pore fractal dimension can be a major parameter to reflect adsorption and desorption capacities of high-rank coal reservoir,and based on pore fractal dimension can be partitioned the reservoir into CBM-rich and easy to desorption,CBM-rich but hard to desorption and CBM-bearing desorption areas.
Correction to "research on the Optimization for Acidification Modification Scheme Considering Coal's Wettability Based on the AHP-TOPSIS Method".

Jimin He,Mei Yuan,Bobo Li,Rui Zhang

DOI: https://doi.org/10.1021/acsomega.4c01470

IF: 4.1

2024-01-01

ACS Omega

Abstract:[This corrects the article DOI: 10.1021/acsomega.3c03428.].
Pore structure characteristics and fractal structure evaluation of medium- and high-rank coal

Yuan Yuan,Feng Cai,Lingling Yang

DOI: https://doi.org/10.1177/01445987211034315

2021-08-17

Abstract:The presence of gas content in medium- and high-rank coal poses a threat to safety production. Safe gas extraction is based on a correct understanding of the pore structure of coal. This work investigates the pore structure characteristics of medium- and high-rank coal and evaluates their fractal structure. The coal samples were collected from Huainan Coalfield and Qinshui Coalfield, and divided into four types, according to the difference in surface bright characteristics. Through adopting low-temperature liquid nitrogen adsorption and desorption, and applying Kelvin equation, we obtain the main pore structure types and main pore size distribution characteristics of various coal briquettes. Electron microscope scanning structure and scientific analysis were used for special adsorption and desorption curves and hysteresis to find the dynamic reason. According to the different adsorption mechanism and Frenkel–Halsey–Hill-based model, with P/ P 0 = 0.4 as the dividing point of fractal dimension analysis, the pore structure of coal samples is classified into five grades. The fractal evaluation results are consistent with the results of curve analysis and pore size analysis.

energy & fuels
Multi-Scale Characterization of Pores and Fractures in Coals with Different Coal-Body Structures from the Jincheng Mine, Qinshui Basin, Northern China

Haoran Yang,Xiaomei Wang,Rui Li,Pancun Chai,Fan Deng,Xingxing Guo

DOI: https://doi.org/10.3390/min14080833

IF: 2.5

2024-08-19

Minerals

Abstract:The Qinshui Basin is located in the southeast of Shanxi Province, China. It is one of the most abundant coal resources from Permo-Carboniferous North China. It is rich in coal and coalbed methane resources. However, the accumulation of coalbed methane is complex and the enrichment law has not been fully understood because of the high heterogeneity of coal reservoirs in the Qinshui Basin. The examination of dissimilarities between tectonically deformed coals (TDCs) and primary coals at multiple scales holds paramount importance in advancing our understanding of the occurrence and flow patterns of coalbed methane, and in providing guidance for exploration efforts. In the present study, the samples from the Jincheng Mine, Qinshui Basin, were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), mercury intrusion porosimetry (MIP), CO2 gas adsorption and 3D X-ray micro-computed tomography. The results showed that the dominant minerals in coal were illite, kaolinite, and calcite, with minor amounts of quartz and ankerite. In comparison to primary coal, tectonism could increase the microfractures density of type A (the fracture of width ≥ 5 μm and length > 10 mm) in TDCs. In CO2 gas adsorption in mylonite coal, it was observed that the volume of micropores (<2 nm) was significantly reduced leading to a decrease in gas adsorption capacity. The result of Micro-CT scanning revealed that the minerals occurred as veins in primary coal, but as irregular aggregates in TDCs. Moreover, tectonism had a staged impact on fracture structure, which was initially closed in cataclastic coal and then formed into granulated coal during the tectonic evolution. The effects of tectonism on coal structure had an impact on the connectivity of micropores at the micrometer scale by the destruction of the pore throat structure, increasing the heterogeneity of the reservoir. These findings help to better understand the changes in TDC structure at different scales for developing effective strategies for coalbed methane exploration and production.

geochemistry & geophysics,mineralogy,mining & mineral processing
Quantitative characterization of pore-fracture structure of medium and high-rank coal based on micro-CT technology

Jinwei Hao,Longyong Shu,Zhonggang Huo,Yongpeng Fan,Siyuan Wu,Yang Li,Xiaoyang Guo

DOI: https://doi.org/10.1080/19392699.2023.2190102

2023-03-17

International Journal of Coal Preparation and Utilization

Abstract:Coal is a natural and complex porous medium, which contains pore-fracture structures of different scales. The pore-fracture structures of coal directly affect the characteristics of gas storage and migration. In this paper, high-resolution X-ray CT scanning technology is used to quantitatively characterize the pore-fracture structure of medium and high-rank coals. First, the porosity inversion method is used to determine the optimal threshold segmentation of pores and fracture in medium and high-rank coals. Then, the pore and fracture model of representative element volume (REV) was extracted and established to characterize the area porosity, pore surface area, and shape factor of the two coals, and the relationship between pore surface area and shape factor was investigated. Finally, an equivalent pore network model (PNM) of connected pore topology was established, and pore-throat parameters are statistically analyzed, including pore volume, pore radius, throat radius, throat length, and coordination number. The results show that the average pore diameter and average surface area of macropores in medium-rank coals are larger than those of high-rank coals, and high-rank coals have fewer isolated pores. With the increase of coal rank, the length and radius of the throat gradually decrease, which indicates that the throat of the medium-rank coal has a higher degree of development, and the gas seepage ability in the throat is stronger. The outcome of this study is of great significance for comprehensively understanding the pore-fracture structure of coal in micro-scale.

energy & fuels,mining & mineral processing
Pore Fractal Characteristics of Different Macro-Coal Components and Influence on Adsorption/Desorption: A Case Study in the Huanglong Jurassic Coalfield

Zhuoyuan Ma,Yue Chen,Dongmin Ma,Guofu Li,Weibo Li,Yusong Ji,Chao Zheng,Liya Wang,Xin Wang

DOI: https://doi.org/10.1021/acsomega.2c04793

IF: 4.1

2022-12-20

ACS Omega

Abstract:ACS Omega . 2022 Nov 17;7(48):43770-43783. doi: 10.1021/acsomega.2c04793. eCollection 2022 Dec 6. NO

chemistry, multidisciplinary

Correction to Pore Characteristics and Fractal Dimension Analysis of Tectonic Coal and Primary Structure Coal: A Case Study of Sanjia Coal Mine in Northern Guizhou.

Correction to Pore Characteristics and Fractal Dimension Analysis of Tectonic Coal and Primary Structure Coal: A Case Study of Sanjia Coal Mine in Northern Guizhou

Correction: Zhang et al. Evolution Mechanism of Microscopic Pore System in Coal-Bearing Marine–Continental Transitional Shale with Increasing Maturation. Minerals 2023, 13, 1482

Microstructure Characteristics of Tectonic Coal and Primary Coal: A Case Study of Guizhou, China

Pore characteristics and fractal characterization variability of typical middle- and high-rank coal reserves: A case study of middle- and high-rank coal samples in western Guizhou

Correction to “Wetting Mechanism and Experimental Study of Synergistic Wetting of Bituminous Coal with SDS and APG1214”

Advanced characterization of seepage pores in deformed coals based on micro-CT

Pore structure in tectonically deformed coals by small angle X-ray scattering

Fractal structure of microfractures and characteristics of porosity and permeability in cataclastic coals

Micro‐structure analysis on fracture network in high rank coals

Correction to "Proppant Settlement and Long-Term Conductivity Calculation in Complex Fractures"

Fractal Characteristics of Nano-Pore Structure in Tectonically Deformed Coals in Hancheng Mining Area

Experimental Investigation on Coal Pore and Fracture Characteristics Based on Fractal Theory

Correction: Catalytic conversion of carbon dioxide (CO2) using coal-based nano-carbon materials

Study on Types of Tectonic Coal from Xutuan Coal Mine in Huaibei Coalfield and Its Pore Characteristics

Study on Pore Fractal Characteristics of High-rank Coal Reservoirs in Southern Qinshui Basin

Correction to "research on the Optimization for Acidification Modification Scheme Considering Coal's Wettability Based on the AHP-TOPSIS Method".

Pore structure characteristics and fractal structure evaluation of medium- and high-rank coal

Multi-Scale Characterization of Pores and Fractures in Coals with Different Coal-Body Structures from the Jincheng Mine, Qinshui Basin, Northern China

Quantitative characterization of pore-fracture structure of medium and high-rank coal based on micro-CT technology

Pore Fractal Characteristics of Different Macro-Coal Components and Influence on Adsorption/Desorption: A Case Study in the Huanglong Jurassic Coalfield