Abstract:Cryogenic fuels, such as liquid hydrogen and liquid natural gas, emerge as versatile and sustainable energy carriers that are revolutionising various industries including aerospace, automotive, marine, and power generation. Thermoplastic polymers can be a suitable alternative to metal seals in cryogenic fuel systems. However, there is limited study about the behaviours of thermoplastics at cryogenic temperatures, especially at liquid hydrogen temperature of 20 Kelvin (K). This paper measured the tensile properties and coefficient of thermal expansion of three popular thermoplastics: PTFE, PEEK and UHMWPE at room temperature (RT), 77 K and 20 K and at four strain rates. Further microscopic analysis was also conducted to understand the failure mechanisms occurring when combining reduced temperature with varying strain rate. The tensile strength of each polymer increased from RT to 77 K and decreased from 77 K to 20 K. Elastic modulus tended to increase, and the strain recorded at failure decreased when reducing temperature from RT to 20 K. From microscopic observation of PEEK and UHMWPE, a reduction in temperature from 77 K to 20 K resulted in a larger instantaneous fracture, with multi-faceted fracture surfaces containing many small mirror like and opaque or misty sub-regions within the fracture zone. For PTFE, the surface morphology exhibited an insensitivity to the increase in strain rate at cryogenic temperatures, and the microscopy showed how the size of dimples found within the fracture interface became smaller when temperature was reduced from 77 K to 20 K. Finally, PEEK was found to contract much less than PTFE and UHMWPE at 20 K, in agreement to it having the highest glass transition temperature of the three polymers, which is normally a good indicator when attempting to identify polymers that will tend to exhibit smaller contraction at cryogenic temperatures.

Design and Implementation of a Thin Film Tensile Testing Apparatus for Cryogenic Applications

Development of a load frame for neutron diffraction and fluorescent thermometry at cryogenic temperature

Polymers at Cryogenic Temperatures-ReadingSample

Organic Single‐Crystal Actuators and Waveguides that Operate at Low Temperatures

Measurement of the Cryogenic Tensile Properties of Polymer Composites

Tensile testing of freestanding polymer thin films with non-standard geometries

A Study of Tensile and Fatigue Loading Effects on the Performance of Metal-Packaged FBG Strain Sensor Developed for Cryogenic Applications

Chapter 2 Cryogenic Properties of Polymer Materials

Thermal Expansion and Magnetostriction Measurements at Cryogenic Temperature Using the Strain Gauge Method

Determining Thermal Expansion Coefficient of Stressed Thin Films at Low Temperature

Compact computer controlled biaxial tensile device for low-temperature transport measurements of layered materials

A Small Liquid-Nitrogen Cryostat for Studying the Optical-Electrical Properties of Thin Films

Improvement Of Thin Film Tensile Testing Technology Using Process Integrated Specimen And Considering Its Out-Of-Plane Deformation

Evaluating the potential of thermoplastic polymers for cryogenic sealing applications: strain rate and temperature effects

Thermal cycling at constant stress for thin films over a wide temperature range: Design and fabrication of a specific device for the study of microactuators

A New Micro-Tensile System for Measuring the Mechanical Properties of Low-Dimensional Materials - Fibers and Films

In Situ and Real-Time Tensile Testing of Thin Films Using Double-Field-of-view Electronic Speckle Pattern Interferometry

Development of an experimental technique for testing rheological properties of ultrathin polymer films used in nanoimprint lithography

Case Study of the Tensile Fracture Investigation of Additive Manufactured Austenitic Stainless Steels Treated at Cryogenic Conditions

An Experimental Method for Micro-Scale Uniaxial Tension Test

Mechanical analysis of multilayer composite materials with duroplastic matrix after exposure to low temperatures