Abstract:<p>For a heat treatment furnace, the precise study of the flow characteristics, combustion and heat transfer in the furnace is essential to know the temperature distribution in a slab during the heating process. In this context several different three-dimensional CFD (Computational Fluid Dynamics) models have been developed to simulate the combustion and heat transfer process in the furnace. These models were developed based on direct fired reheating furnaces with continuous fuel input. In this paper, a novel three-dimensional transient CFD model used to investigate the slab heating characteristics in the heat treatment furnace with pulse combustion was developed. The transient calculation in the furnace was performed based on the steady-state simulation of the furnace temperature, and the movement of slabs on the rollers in the furnace was simulated using dynamic mesh. By comparison, the results from the EDC with two different reaction mechanisms showed good consistency. However, the EDC with the two-step reaction mechanism required one fifth the calculation time of the EDC with the GRI-Mech3.0, and was thus the preferred model. In contrast to direct fired reheating furnaces, the outer radiant tube walls were treated as the coupled boundary conditions in the model to realize indirect heat transfer between the process gas in the furnace and the combustion gas in the radiant tubes. Furthermore, a pulse combustion method was proposed to control the working states of the burners based on UDF (User-Defined Function), in order to realize the pulse combustion process in the heat treatment furnace. By the validation of "Black Box", the temperature variation of the slab and the gas temperature in the furnace predicted by the model agreed well with the experimental results. The simulation revealed that the temperature distribution of the radiant tubes and furnace gas was uniform and the maximum temperature difference on the outer radiant tube walls was less than 84 K. During the slab transient heating process, the slab temperature distribution became more uniform in the soaking zone and the maximum temperature difference along the thickness of the slab was below 13 K at discharge.</p>

Role of radiative and convective heat transfer during heating of an ingot product in a tubular furnace: experiment and simulation

Numerical analysis of the heat transfer of radiant tubes and the slab heating characteristics in an industrial heat treatment furnace with pulse combustion

Modeling approach and numerical analysis of a roller-hearth reheating furnace with radiant tubes and heating process optimization

Numerical Simulation of Heat Transfer Behavior in Hot Spot Zone of Converter Molten Bath

A Simplified Simulation Model of Steady Temperature for Tubular Furnace

Molten Steel Flow, Heat Transfer and Inclusion Distribution in a Single-Strand Continuous Casting Tundish with Induction Heating

Numerical simulation and optimization of steel tube billet heating process in rotary hearth furnace using CFD

Simulation of Temperature Field and Microstructure in Heavy Steel Ingots Solidification

Simulation Study on the Influence of Different Molten Steel Temperatures on Inclusion Distribution under Dual-Channel Induction-Heating Conditions

3D Transient Heat Transfer Simulation and Optimization for Initial Stage of Steel Continuous Casting Process

Simulation of Transient Temperature Field in Metallization Hydrogen Furnace

Heat Transfer Simulation for Covers in Continuous Casting Process of Steel and Its Application

Hydraulic and Numerical Simulation of Flow Field Characteristics in Induction Heating Continuous Casting Tundish

The Heat Transfer Characteristics of Semi-molten Wide Sieving Dilute Phase Particles Between Vertical Heating Surfaces

Heating and Heat-Flow Simulation

Simulation for Temperature Distribution of Polycrystalline Silicon Casting Process

Simulation of Temperature Distribution in the Oriented Silicon Steel Coil in the Heating Stage of Annealing Process

Mathematical Heat Transfer Model Research for the Improvement of Continuous Casting Slab Temperature

Simulation and application of dynamic heat transfer model for improvement of continuous casting process

Numerical Simulation of Residence Time Distribution (RTD) in Tundish with Channel Type Induction Heating

Real-Time Heat Transfer Model Based on Variable Non-Uniform Grid for Dynamic Control of Continuous Casting Billets