Abstract:Droplet splashing behavior caused by the top blowing supersonic jets impacting the liquid metal surface significantly affects the decarburization efficiency and refractory erosion during the basic oxygen furnace (BOF) steelmaking process. However, simulating the mass and size of splashing droplets is challenging because the droplet size differs by multiple orders of magnitude from the molten bath. Herein, a hybrid model (VOF-to-DPM) coupling the volume of fluid model (VOF) and discrete phase model (DPM) was combined with the adaptive mesh refinement (AMR) technique to successfully achieve high-resolution and quantitative capture of splashing droplets. The simulation results are in good agreement with the droplet splashing rate calculated by the theoretical formula based on the Blowing number ( N B ) within the allowable error range. The generation mechanisms of splashing droplets caused by single-hole and multiple-hole jets impacting the liquid surface were clarified. Furthermore, the effects of oxygen lance height and top blowing flow rate on the total droplet mass, mass and percentage of droplets sprayed on the furnace wall, and the droplet size were also investigated. It was revealed that with the decrease of the oxygen lance height, the total droplet mass increases and then decreases, and the droplet size increases. As the top blowing flow rate increases, the total mass and size of droplets both tend to increase. The proportion of droplets sprayed on the furnace wall increases sequentially when the impact cavities are in the penetrating mode, splashing mode, and quasi-dimpling mode. Moreover, the relationship between the cavity morphology and the droplet splashing was quantitatively characterized. As the modified cavity shape index ( I cm ) increases, the droplet splashing mass increases then decreases and finally increases. The change in cavity mode is the main factor affecting the droplet splashing behavior.

Numerical Simulation of Heat Transfer Behavior in Hot Spot Zone of Converter Molten Bath

Numerical and experimental analysis of the temperature field distribution in a full-scale 150t converter

Simulation of Fluid Flow in the Top–Bottom Combined Blowing Converter

Numerical Simulation of the Interaction Between Supersonic Oxygen Jets and Molten Slag–Metal Bath in Steelmaking BOF Process

Role of radiative and convective heat transfer during heating of an ingot product in a tubular furnace: experiment and simulation

Simulating and Evaluating the Multiphase Jet Flow Characteristics of a Five‐Hole Oxygen Lance under Nonisothermal Conditions

Mathematical Modeling on the Multiphase Flow during Top–Bottom Combined Blowing Basic Oxygen Furnace Steelmaking Process

Numerical Simulation of Multiphase Flow Induced by Bottom Blowing Limestone Powder in Converter Steelmaking

Numerical analysis of the heat transfer behavior of steel stream in the converter tapping

Numerical Simulation of the Slag Splashing Process in A 120 Ton Top-Blown Converter

Enhancement of Mass Transfer in Converter by Improving the Flow of Slag and Molten Steel

Numerical Simulation for the Splashing Behavior in an Oxygen Converter Process

Enhanced impingement characteristics of supersonic oxygen jets on molten bath using a multi-nozzle oxygen lance in a converter

Numerical simulation on flow and heat transfer in twin roll strip casting and rolling molten pool with side dams vibrating

Three-dimensional Numerical Simulation of Flow and Splash Behavior in an Oxygen Coal Combustion Melting and Separating Furnace

Numerical Simulation of Transient Flow and Heat Transfer in a Steel Ladle During Holding Period

Numerical Analysis of Two-phase Flow and Heat Transfer in External Cyclic Purification Hot-dip Galvanizing Bath

Numerical simulation and parameter optimization of oxygen bottom blowing smelting process

Numerical Simulation of Droplet Splashing Behavior in Steelmaking Converter Based on VOF-to-DPM Hybrid Model and AMR Technique

Numerical Simulation of Multiphase Flow in Ironmaking Process for Oxygen-Rich Side-Blown Bath Smelting Furnace

Mathematical Simulation on Flow Behavior of Immersion Side-blowing in Iron-bath Smelting Reduction Furnace