Numerical Simulation of Transient Flow and Heat Transfer in a Steel Ladle During Holding Period

Haojian Duan,Caide Huang,Lifeng Zhang

DOI: https://doi.org/10.1007/s11663-024-03090-6

2024-04-20

Metallurgical Transactions B (Process Metallurgy)

Abstract:In the current study, the transient flow and heat transfer in a steel ladle during the holding period are investigated by numerical simulation, in which both the internal transient flow and heat transfer of the fluid and the heat conduction in ladle walls are considered. Moreover, the fluid flow prompted by gas stirring is adopted as the initial flow condition since the holding period commonly starts with the cutoff of gas injection in practice. The results show that a single large recirculation loop is generated in the melt and the bulk flow velocity sharply decreases at the early stage. Then, the flow becomes the two-vortex type with the development of natural convective flow. Thereafter, the transient flow weakens again for the diminishing of temperature gradients. The temperature profiles and thermal stratifications in the liquid steel are not only dependent on the heat transfer but also related to the fluid flow. Due to the excellent heat insulation capability of refractory materials, large temperature gradients are observed in refractory walls, and temperature variations, with respect to time, mainly appear in working linings. Meanwhile, the temperature and heat flux on ladle external surfaces keep a stable and axial symmetry distribution even though the temperature and heat flux at the liquid steel–refractory wall interface is transient and non-uniform. The initial temperature of the liquid steel has significant effects on the temperature drop rate, the heat flux at liquid steel–refractory wall interface, and the temperature distribution in the working lining but has weak effects on the velocity field, temperature profile, and thermal stratification in the liquid steel and the distributions of temperature and heat flux on ladle external surfaces.