Abstract:Ni-based single crystal line alloy is constituted with gamma phase and gamma' phase in the form of coherency. Since an indenter for two-phase coherent structure is bigger than the usual nano-scale indenter, the press location of indenter may be unclear in nanoindentation simulation. Both gamma phase and gamma' phase may be pressed initially, and the mechanical properties shown are different because of the initial press locations. The nanoindentation of Ni-based single crystal line alloys is simulated by molecular dynamics method. Two models are used to study about the hardness in [001] crystal orientation, one is the model gamma/gamma' with the initial indentation on gamma phase, and the other is the model gamma'/gamma with the initial indentation on gamma' phase. The influence of misfit dislocation at (001) interface on nanoindentation of the two models is analyzed using a center-symmetry parameter. Results show that the misfit dislocation shape of the two models are different after relaxation. Lomer-Cottrell dislocation occurs on (001) interface in the gamma'/gamma model. Before 0.930 nm press depth is reached, there is little change in the (001) interface misfit dislocation of the two models. Relationship between press load and press depth is similar for the two models, and it is the same in the relationship between hardness and press depth. After press depth reaches 0.930 nm, the misfit dislocation at (001) interface for model gamma'/gamma grows big, which results in a smaller press load and a smaller hardness computation in the model gamma'/gamma than that in model gamma/gamma'. When the press depth reach 2.055 nm, we find only a small amount of dislocations in gamma phase that can go into gamma' phase since the misfit dislocation at (001) interface in model gamma/gamma' hinders the process. However, none of dislocations can go into gamma phase because of the prevention caused by Lomer-Cottrell dislocation at the (001) interface in the model gamma'/gamma. That means the Lomer-Cottrell dislocation reinforces the material obviously. So the press load in model gamma'/gamma grows faster than that in model gamma/gamma'.

Orientation Dependence of Microcosmic Plasticity and Toughness in Nb-Si Alloys

Anisotropy of Mechanical Properties in Directionally Solidified Nb-Si Alloys at Room Temperature Compression

Shock-induced ?" martensitic transformation in Nb single crystals

Effect of Crystallographic Orientation on Nano-indentation Behavior of Nickel Based Single Crystal Super Alloys

Nanoindentation Simulation of Ni-Base Single-Crystal Superalloy with the Consideration of Interface Effect

Indentation Creep Surface Morphology of Nickel-Based Single Crystal Superalloys

Atomic Simulation of the Effect of Orientation on Tensile/compressive Properties in Nickel-Based Single Crystal Superalloys

Influence of Defects and Crystallographic Orientation on Mechanical Behavior of Nanocrystalline Aluminium

Orientation Effects on the Tensile Properties of Single Crystal Nickel with Nanovoid: Atomistic Simulation

Microstructure Characterization and Damage Coupled Constitutive Modeling of Nickel-Based Single-Crystal Alloy with Different Orientations

Influence Of Initial Indentation Point On Nanoindentation Of Ni-Based Single Crystal Line Alloys

Experiments and crystal plasticity simulations for the deformation behavior of nanoindentation: Application to the 2 phase of TiAl alloy

Unveiling the Local Deformation Behavior of Typical Microstructures of Nickel-Based Single Crystals under Nanoindentation

Experiments and crystal plasticity simulations for the deformation behavior of nanoindentation: Application to the α2 phase of TiAl alloy

Study of the Fracture Mechanism of NbSS/Nb5Si3 in Situ Composite: Based on a Mechanical Characterization of Interfacial Strength

Mechanical Properties of Directionally Solidified Nb–Mo–Si-based Alloys with Aligned Nbss/Nb5Si3 Lamellar Structure

Molecular Dynamics Simulation for Orientation Dependence of Deformations in Monocrystalline AlN During Nanoindentation

Study on the Fracture Toughness of Nb-10Si Alloys

The Deformation and Fracture Modes of Fine and Coarsened NbSS Phase in a Nb-20Si-24Ti-2Al-2Cr Alloy with a NbSS/Nb5Si3 Microstructure

Nanoindentation Size Effect of Molybdenum-Niobium Single Crystals with Different Crystallographic Orientations

Mechanism of Solute Hardening and Dislocation Debris-Mediated Ductilization in Nb-Si Alloy