Abstract:The effects of hole shape and orientation on the mechanical properties of micro-scale 2D honeycomb structures, fabricated using a focused ion beam equipment, have been investigated using an in situ micro-mechanical testing machine inside the scanning electron microscope . The material used was single-crystal Ni oriented in the direction, with the plane of the 2D micro-lattice having a {001} normal direction. The hole shapes explored were hexagonal and circular, while two different orientations of the hexagonal holes were also compared. One of these orientations had a horizontal arm (designated 0° orientation), while the other had a vertical arm (30° orientation) in each hexagon. The results indicate that there is substantial change in strength and ductility depending on the orientation and shape of the holes with respect to the tensile axis. The samples with 30° oriented hexagonal holes had the lowest strength and highest ductility, while the samples with circular holes showed the greatest yield and tensile strength. The samples with the 0° orientated hexagonal holes had much higher strength and lower ductility than the 30° orientated ones. Moreover, the samples with 0° orientated hexagonal holes, which had a similar hole pattern arrangement to the ones with circular holes, had a similar strength to those of the latter type. Thus, it is apparent from this study that the orientation or arrangement of the holes is more important in determining the properties of the 2D microlattice than the shape of the holes. Finite element simulation of the lattice structures utilised the GTN (Gurson, Tvergaard and Needleman) model to evaluate the failure modes under uniaxial tension. The lattice structure has been shown, in a previous paper by the authors, to exhibit composite like behaviour with strength differences in various parts arising from size effects. These size effect variations were incorporated into the model, and a generalised formulation for the GTN parameters was proposed on the basis of one of the experimental configurations and subsequently applied to the other geometries. The models were in good quantitative agreement with the experimental results with accurate representation of the flows stress and failure modes.

Orientation Effects on the Tensile Properties of Single Crystal Nickel with Nanovoid: Atomistic Simulation

Exploration of the Defect’s Effect on the Mechanical Properties of Different Orientated Nanowires

Effects of crystallographic orientation, temperature and void on tensile mechanical properties of Ni-Co single crystal nanopillars

Orientation dependence of microstructure deformation mechanism and tensile mechanical properties of Nickel-based single crystal superalloys: A molecular dynamics simulation

The effect of grain boundary structures on crack nucleation in nickel nanolaminated structure: A molecular dynamics study

A Large Deformation Atomistic Study Examining Crystal Orientation Effects on the Stress–strain Relationship

Phase-field-crystal Simulation of Nano-Single Crystal Microcrack Propagation under Different Orientation Angles

Effect of Applied Stress on Vacancy Segregation Near the Grain Boundary in Nickel

Effect of crystallographic orientation on mechanical properties of single-crystal CoCrFeMnNi high-entropy alloy

Effect of orientations on in situ tensile deformation and fracture behaviours of nickel-base single-crystal superalloys

Influence of crystal orientations on the creep fracture of a nickel-based single crystal superalloy

Molecular Dynamics Simulation of Crack Growth in Mono-Crystal Nickel With Voids and Inclusions

Orientation and temperature dependence of yielding and deformation behavior of a nickel-base single crystal superalloy

Lattice Rotation and Deformation Mechanisms under Tensile Loading in a Single-Crystal Superalloy with [001] Misorientation

Effects of Strain Rate, Temperature and Grain Size on the Mechanical Properties and Microstructure Evolutions of Polycrystalline Nickel Nanowires: A Molecular Dynamics Simulation

Systematical Analysis on the Grain Orientation Evolution of Pure Nickel under Plastic Deformation by Using In-Situ EBSD

Deformation behaviour of hexagonal- and circular-patterned Ni single-crystal 2D micro-lattices via in situ micro-tensile testing and computational analysis

Synergistic effects of temperature and strain rate on tensile properties of simulated Ni-6Cu alloy with Σ3 non-Arrhenius grain boundary

Mechanical Behavior and Size Sensitivity of Nanocrystalline Nickel Wires Using Molecular Dynamics Simulation

Effect of Orientation on the Microstructure of Nickel‐based Crystalline Superalloys

Effect of Loading Method, Temperature, and Twin Defects on the Mechanical Behavior of Nanocrystalline Ni with Gradient Spacing Twin Structure