Abstract:Conventional methods for hot extrusion of magnesium (Mg) alloy sheets have limitations for microstructure improvement and mechanical property enhancement. Co-extrusion of Mg alloy with an Al alloy core provides an opportunity for refining the grain size and improving basal texture. This study introduces a novel severe plastic deformation (SPD) method, Direct Extrusion-Continuous Shear (DE-CS), utilizing 6063 Al alloy as the core to fabricate innovative Mg/Al clad composite sheets. Monolithic Mg sheets (non-co-extruded condition) are extruded under identical conditions for comparison. By evaluating the microstructure and mechanical properties of AZ31 Mg alloy under co-extrusion and non-co-extrusion conditions, the positive effect of Mg-Al composite billet co-extrusion on AZ31 Mg alloy is established. The grain refinement effect in co-extruded samples is superior, enhancing plasticity without significant reduction in tensile strength. The microstructure evolution and dynamic recrystallization (DRX) behaviour of AZ31 Mg alloy during co-extrusion were analyzed comprehensively. The results indicate that, in the initial stages of deformation, various variants of {10-12} extension twins (ETs) play a crucial role in refining the original grains, forming initial [10-10]//ED fiber texture components alongside other non-basal components. Upon entering the shear deformation (SD) zone, deformed twins disappear, and small dynamically recrystallized (DRXed) grains emerge along boundaries of coarse deformation grains and within the grains. Strong shear deformations and compressive stress from transverse direction (TD) induce intensified prismatic and pyramidal slip, promoting continuous dynamic recrystallization (CDRX) and discontinuous dynamic recrystallization (DDRX). CDRX predominantly affects elongated deformed grains, forming an [10-10]//ED fiber texture through high-energy grain boundary segmentation. Subsequently, compatible stress increases due to the activity of non-basal slip dislocation and the reduction in grain boundary (GB) size. DDRX emerges as the dominant mechanism, generating randomized [10-10]//ED fiber and non-fiber textures within parent grains and at boundaries.

Enhanced Mechanical Behaviour and Corrosion Resistance of Az61 Magnesium Alloy Realized Through an Extrusion-Shear Process

Investigation of microstructure and mechanical properties of ZK60 magnesium alloy achieved by extrusion-shearing process

Microstructures and Corrosion Behavior of AZ61 Magnesium Alloy Prepared by Extrusion–Shear with Different Die Channel Angles

Mechanical properties and wear-corrosion resistance of a new compound extrusion process for magnesium alloy AZ61

Effect of Zinc and Severe Plastic Deformation on Mechanical Properties of AZ61 Magnesium Alloy

Deformation behaviour, microstructure evolution and dynamic recrystallization mechanism of AZ31 magnesium alloy under co-extruded by Mg-Al composite billet

A novel continues multi-shear extrusion process on the microstructure and mechanical property evolution of AZ31 magnesium alloys

Investigation on corrosion behavior and mechanical properties of an extruded Mg-Zn-Al-Sn-Mn alloy

Unveiling the microstructure evolution and deformation mechanisms of micro-alloying Mg-1.5Zn-0.5Zr-0.5Sr alloy via extrusion-shearing

Microstructure and mechanical properties of Mg-Zn-Ca-Zr alloy fabricated by hot extrusion-shearing process

Microstructure Evolution and Mechanical Properties of AZ80 Mg Alloy during Annular Channel Angular Extrusion Process and Heat Treatment

Effects of Extrusion–Shear Process Conditions on the Microstructures and Mechanical Properties of AZ31 Magnesium Alloy

Microstructure and Properties of Magnesium Alloy Processed by a New Severe Plastic Deformation Method

Microstructure Evolution and Mechanical Properties of an Az61 Mg Alloy Through Cyclic Extrusion Compression

Fabrication of fine-grained, high strength and toughness Mg alloy by extrusion−shearing process

Study of the microstructure, texture and tensile properties of as-extruded AZ91 magnesium alloy

Microstructure and Mechanical Properties of As-Cast and Hot Extruded–Sheared ZG61 Alloy

Investigation of the microstructure and properties of extrusion-shear deformed ZC61 magnesium alloy under high strain rate deformation

Microstructure, Mechanical Properties, and Texture Evolution of Mg–Zn–Y–Zr Alloy Fabricated by Hot Extrusion–shearing Process

Microstructure and Tensile Properties of AZ61 Alloy Sheets Processed by High-Ratio Extrusion with Subsequent Direct Aging Treatment

A special extrusion-shear manufacturing method for magnesium alloy rods based on finite element numerical simulation and experimental verification