Abstract:In this study, ultra-fine grain Mg-3Zn-xCa-0.6Zr (x = 0, 0.6, 1.2, 1.8) alloy was obtained by a novel extrusion-shearing (ES) deformation process combining initial forward extrusion and subsequent equal channel angular extrusion (ECAP) shearing. The purpose of this paper is to improve the strength and plasticity of the alloy by ES process. The results of as-cast and homogenized alloy show that the ternary Ca2Mg6Zn3 phase with excellent thermal stability and refined grain size was formed in the alloy by adding Ca. In the ES process, the ternary phase was broken into ultra-fine particles pinned to the dynamic recrystallization (DRX) grain boundary, which introduced strong particle stimulated nucleation (PSN). Moreover, large number of MgZn phases in Ca-containing alloys were dynamically precipitated at DRX grain boundaries and within grains. In addition, in the early stage of the ES process, Ca2Mg6Zn3 phase promoted the accumulation of dislocations at the grain boundaries, and part of the grain boundary was transformed into low-angle grain boundaries (LAGBs) and high-angle grain boundaries (HAGBs). After the die corner shearing, the accumulated LAGBs gradually transformed into HAGBs due to continuous dynamic recrystallization (CDRX). Through the novel ES process and the addition of Ca element, the basal plane texture was significantly weakened and the DRX grain was refined. With the increase in Ca content, the strength and toughness of ES alloy increased obviously, and the yield asymmetry decreased gradually. When the content of Ca was 1.2 wt%, ES alloy exhibited the best combination of strength and toughness (UTS = 342 MPa, δ = 20.9%) due to nano-scale Ca2Mg6Zn3 phase, grain refinement and texture weakening. This property is of great significance for the development of magnesium alloys for biological applications.

Microstructure and Mechanical Properties of As-Cast and Hot Extruded–Sheared ZG61 Alloy

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Microstructure and mechanical properties of Mg-Gd-Zn-Zr alloy after hot extrusion

Investigation of microstructure and mechanical properties of ZK60 magnesium alloy achieved by extrusion-shearing process

Microstructure and mechanical properties of Mg-Zn-Ca-Zr alloy fabricated by hot extrusion-shearing process

Investigation of the microstructure and properties of extrusion-shear deformed ZC61 magnesium alloy under high strain rate deformation

Investigations on Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn-Zr-Nd Alloy

Microstructure and mechanical properties of extrusion ZC61 alloys under different dynamic compression loading directions

Unveiling the microstructure evolution and deformation mechanisms of micro-alloying Mg-1.5Zn-0.5Zr-0.5Sr alloy via extrusion-shearing

Tensile Mechanical Properties and Deformation Mechanism of the Extruded ZM61 Magnesium Alloy at High Strain Rates

Microstructure Evolution and Mechanical Properties of Mg-7Gd-3Y-1Nd-1Zn-0.5Zr Alloy

The Research of Microstructure and Mechanical Properties of Mg–7Gd–3Y–1Nd–0.5Zn–0.5Zr (wt%) Alloy

Microstructures and Mechanical Properties of a High-Strength Mg-3.5Sm-0.6Zn-0.5Zr Alloy

Microstructure evolution difference in Mg96.5Gd2.5Zn1 alloys extruded from as-cast and solution-treated states

Effect of Zn Concentration on the Microstructures and Mechanical Properties of Extruded Mg–7Y–4Gd–0.4Zr Alloys

Effect of extrusion temperature on microstructure, mechanical properties, and deformation mechanism of Mg-2.5Er-0.6Zr alloy

Microstructure modification and precipitation strengthening for Mg–6Zn–1Mn–4Sn–0.5Ca through extrusion and aging treatment

Hot Extrusion Effect on the Microstructure and Mechanical Properties of a Mg–Y–Nd–Zr Alloy

Investigation of the optimum preheating treatment parameters for extruded Mg–Gd–Y–Zn–Zr alloy using high-throughput experiments

Evolution of Microstructure, Mechanical Properties, and Corrosion Resistance of Mg–2.2Gd–2.2Zn–0.2Ca (wt%) Alloy by Extrusion at Various Temperatures

Enhanced strength-ductility synergy and activation of non-basal slip in as-extruded Mg–Zn–Ca alloy via heterostructure