Abstract:In this study, ultra-fine grain Mg-3Zn-xCa-0.6Zr (x = 0, 0.6, 1.2, 1.8) alloy was obtained by a novel extrusion-shearing (ES) deformation process combining initial forward extrusion and subsequent equal channel angular extrusion (ECAP) shearing. The purpose of this paper is to improve the strength and plasticity of the alloy by ES process. The results of as-cast and homogenized alloy show that the ternary Ca2Mg6Zn3 phase with excellent thermal stability and refined grain size was formed in the alloy by adding Ca. In the ES process, the ternary phase was broken into ultra-fine particles pinned to the dynamic recrystallization (DRX) grain boundary, which introduced strong particle stimulated nucleation (PSN). Moreover, large number of MgZn phases in Ca-containing alloys were dynamically precipitated at DRX grain boundaries and within grains. In addition, in the early stage of the ES process, Ca2Mg6Zn3 phase promoted the accumulation of dislocations at the grain boundaries, and part of the grain boundary was transformed into low-angle grain boundaries (LAGBs) and high-angle grain boundaries (HAGBs). After the die corner shearing, the accumulated LAGBs gradually transformed into HAGBs due to continuous dynamic recrystallization (CDRX). Through the novel ES process and the addition of Ca element, the basal plane texture was significantly weakened and the DRX grain was refined. With the increase in Ca content, the strength and toughness of ES alloy increased obviously, and the yield asymmetry decreased gradually. When the content of Ca was 1.2 wt%, ES alloy exhibited the best combination of strength and toughness (UTS = 342 MPa, δ = 20.9%) due to nano-scale Ca2Mg6Zn3 phase, grain refinement and texture weakening. This property is of great significance for the development of magnesium alloys for biological applications.

Microstructure, Mechanical Properties, and Texture Evolution of Mg–Zn–Y–Zr Alloy Fabricated by Hot Extrusion–shearing Process

Microstructure Evolution and Properties of Mg-9Gd-0.8Al Alloy with Lamellar Phase During Extrusion at Different Temperatures

Unveiling the microstructure evolution and deformation mechanisms of micro-alloying Mg-1.5Zn-0.5Zr-0.5Sr alloy via extrusion-shearing

Microstructure and mechanical properties of Mg-Zn-Ca-Zr alloy fabricated by hot extrusion-shearing process

Fabrication of fine-grained, high strength and toughness Mg alloy by extrusion−shearing process

Dynamic Recrystallization, Texture Evolution, and Improved Mechanical Properties of Mg-Y-Zn-V Alloy during Forging and Subsequent Extruding Deformation

Investigation of microstructure and mechanical properties of ZK60 magnesium alloy achieved by extrusion-shearing process

Effects of extrusion ratio and temperature on the microstructure and mechanical properties of Mg–Zn–Yb–Zr extrusion alloys

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Microstructure and Mechanical Properties of As-Cast and Hot Extruded–Sheared ZG61 Alloy

Microstructure evolution, texture and mechanical properties of a Mg–Gd–Y–Zn–Zr alloy fabricated by cyclic expansion extrusion with an asymmetrical extrusion cavity: The influence of passes and processing route

Dynamic Recrystallization and Texture Evolution of Mg–Y–Zn Alloy During Hot Extrusion Process

Influence of Extrusion Ratio on Microstructure and Tensile Properties of Mg–Gd–Y–Zn–Zr Alloy

Microstructure and mechanical properties of Mg-Gd-Zn-Zr alloy after hot extrusion

Microstructure characteristics, yield asymmetry and fracture mechanism of the fine grained thin-wall Mg-6.03Zn-0.55Zr tubes fabricated by hot spinning

Microstructure and Mechanical Properties of Extruded Mg-Zn-Nd-Y-Zr-Ca Alloy

Effects of extrusion process on microstructure, precipitates and mechanical properties of Mg-Gd-Y-Zr-Ag alloys

Effect of extrusion temperature on microstructure, mechanical properties, and deformation mechanism of Mg-2.5Er-0.6Zr alloy

Microstructures and Mechanical Properties of a High-Strength Mg-3.5Sm-0.6Zn-0.5Zr Alloy

Microstructural Evolution and Mechanical Properties of Mg-5y-5gd-Xnd-0.5zr Magnesium Alloys at Different States