Preparation and High Temperature Resistance of Modified Boron Phenolic Resin with Almandine Micropowder

DONG Chuang,DENG Zongyi,REN Yilin,TANG Qingxiu,HUANG Zhixiong,SHI Minxian

DOI: https://doi.org/10.13801/j.cnki.fhclxb.20210628.001

2021-01-01

Abstract:In view of the insufficient heat resistance and poor ablation resistance of fiber-reinforced phenolic resin composites, island silicate mineral-almandine micropowder was used as ceramicized filler to modify the boron phenolic resin, and the molding process was used to prepare different filler contents. Preparation of almandine micropowder /boron phenolic resin (AM/BPR) ceramizable composite material and high silica glass fiber-almandine micropowder /boron phenolic resin (HSF-AM/BPR) ceramizable composite material with different filler content by molding process. The influence of almandine micropowder on the heat resistance, ablation resistance and mechanical propertiesof the boron phenolic resin system, as well as the phase transition and microscopic morphology changes of the material at different temperatures were explored. The results show that as the content of almandine micropowder increases, the heat resistance of AM/BPR composites increases. A liquid phase is formed above 800℃, and a denser ceramic layer is formed at 1100℃, which is important for the high-temperature performance and ablation resistance of the composite material. When the almandine micropowder content is 50wt%, the linear ablation rate is 0.221 mm/s, and the mass ablation rate is 0.103 g/s, which is 44.05% and 43.6% lower than that of pure boron phenolic resin. When the content of almandine micropowder is 40wt%, the flexural strength of HSF-AM/BPR ceramic composites at room temperature and after high temperature treatment are increased by 29% and 47.97% compared with those without filler, respectively. Its excellent heat resistance, ablation resistance and mechanical properties are expected used as a thermal protection material in the aerospace field.