Abstract:Based on grain size effect of ceramics and boundary effect model, the concept of relative size is introduced. In addition, meso-fracture model of ceramics with different relative sizes is established. Experimental data of nine ceramic materials with different relative sizes are statistically analyzed. It is found that fictitious crack growth length Δa fic is k (W − a 0) (where k is a constant, W is the specimen depth, and a 0 is the initial crack length). Furthermore, k value is 0.02 when relative size is less than 200, while it is 0.2 when relative size is in the range from 200 to 1500. Fracture parameter values determined by considering relative size are basically consistent with fracture parameter values reported in the literature. Combined with normal distribution, full fracture failure curves of ceramics with different relative sizes are constructed. No brittle failure controlled by fracture toughness occurs in ceramic specimens with relative size less than 200, while brittle failure controlled by fracture toughness occurs in ceramic specimens with relative size ranging from 200 to 1500. Main reasons for the occurrence of brittle failure controlled by fracture toughness are that with increasing relative size, grain size is reduced, the number of grain boundaries increases, crack growth length increases gradually, and the interaction between fracture process zone of ceramics and the boundary of specimens becomes stronger. At the same time, an expression for predicting the peak load P max of ceramics with relative size ( W – a 0 ) / d av ≤ 1500 is established. It is found that peak load can be predicted based on relative size and geometric parameters of ceramics, which is of great significance for conveniently and accurately obtaining fracture parameters of ceramics.

Analysis of Tensile Strength and Fracture Toughness of ZrB2–SiC Ceramic from Three-Point Bending Samples with Edge Cracks

Assessing fracture toughness in sintered Al2O3–ZrO2(3Y)–SiC ceramic composites through indentation technique

Effects of Short Carbon Fiber on Mechanical Properties of ZrB2-SiC Ultra-high Temperature Ceramics

Mechanical Properties of Short Carbon Fiber Reinforced ZrB2–SiC Ceramic Matrix Composites

Bending and Thermal Expansion Properties of 3D-C_f/sic Composites

The Fabrication and Mechanical Properties of SiC/ZrB2 Laminated Ceramic Composite Prepared by Spark Plasma Sintering

Preparation, mechanical properties, and toughening mechanisms of SiCw/SiCp‐reinforced zirconia‐toughened alumina ceramics

Effects of ZrB2 powders on microstructure and mechanical properties of ZrB2-SiCw ceramics

Fabrication and Properties of Short Carbon Fiber-ZrB2 Ceramic Matrix Composites

In Situ Preparation and Mechanical Properties of (ZrB2+ZrC)/Zr3[Al(Si)]4C6 Composites

Fabrication and mechanical properties of ZrB2–SiCw ceramic matrix composite

High‐temperature tensile strength and fracture behavior of ZrB2‐SiC‐graphite composite

Effects of ZrB2 on Mechanical Properties of Al2O3-ZrB2-SiC Composite Ceramics at Room Temperature

Computer simulated experiments on fracture toughness of particle-dispersed composites

Toughening mechanisms of Ti3SiC2- and TiB2- toughened SiC matrix prepared via reactive melt infiltration

Fracture model of meso-ceramics based on relative size and prediction of fracture toughness and bending strength

Mechanical Properties of ZrB<sub>2</sub>-Based Ceramics Reinforced by Nano-SiC Whiskers

Fracture Toughness of Advanced Structural Ceramics: Applying ASTM C1421

A New Method for Determining Strength and Fracture Toughness of Ceramic Materials in Air at 1500-2000 °C

Shear banding and serrated flow behaviors of high toughness Zr61Ti2Cu25Al12 bulk metallic glass under bending

ZrO 2 Matrix Toughened Ceramic Material‐Strength and Toughness