Abstract:An efficient and ultrafast method to synthesize well-dispersed functional nanoparticles with controlled size and distribution remains largely unanswered. Conventional synthesis methods (wet chemistry, spray pyrolysis, among others) tend to be less controllable, leading to nanoparticle aggregation as well as a wide particle size distribution. Therefore, a short synthesis duration is critical to control nanoparticle size and minimize aggregation. Here we report a rapid and universal high temperature thermal shock method to form and uniformly disperse metallic nanoparticles on a conductive carbon support, such as carbon nanofibers (CNF). First, the desired metal salt precursor is homogeneously mixed into an aqueous solution and loaded onto the conductive carbon support. After drying, the precursor-loaded CNF film is attached to electrical leads inside an argon-filled glovebox to facilitate the electrically triggered Joule heating procedure. An applied electrical pulse from an external power source induces the thermal shock process by heating the precursor-loaded CNF to ~2000 K for mere milliseconds at ultrafast heating/cooling rates (~105 K/s). Due to the short high temperature exposure and rapid cooling rate, nearly any precursor metal salt can decompose and nucleate into uniformly distributed metallic nanoparticles with ultrafine particle sizes without damaging the conductive support. Note that kinetic control can also be achieved by tuning the synthesis parameters (pulse duration, heating temperature, heating/cooling rates). Specifically, as the pulse duration increases to seconds, the temporal limitations for diffusion and migration broaden, allowing nanoparticles with larger diameters to form with a wider particle size distribution. In the field of energy storage, nanoparticle-decorated conductive supports are ideal battery electrodes. To demonstrate the proposed manufacturing method, lithium-oxygen (Li-O2) batteries were successfully assembled and tested using the nanocatalyst-decorated CNF films. Bifunctional ruthenium nanoparticles were synthesized by the rapid thermal shock method to increase the electrocatalytic activity of the CNF-based Li-O2 cathodes and improve oxygen reaction kinetics. The results indicate the potential of this rapid manufacturing method to synthesize an array of non-agglomerated nanoparticle-decorated supports for energy storage devices and beyond.

High Temperature Thermal Shock Synthesis of Catalyst-Decorated Nanostructures for Energy Storage

In Situ High Temperature Synthesis of Single-Component Metallic Nanoparticles

Ultra-fast Self-Assembly and Stabilization of Reactive Nanoparticles in Reduced Graphene Oxide Films

Thermal Shock Synthesis of Nanocatalyst by 3D-Printed Miniaturized Reactors

Transient and general synthesis of high-density and ultrasmall nanoparticles on two-dimensional porous carbon via coordinated carbothermal shock

Rapid, in Situ Synthesis of High Capacity Battery Anodes Through High Temperature Radiation-Based Thermal Shock

Ultrafast Synthesis of Electrocatalysts

A Flexible Method to Fabricate Exsolution‐Based Nanoparticle‐Decorated Materials in Seconds

Rapid Joule-heating Synthesis of Metal/carbon-Based Electrocatalysts for Efficient Carbon Dioxide Reduction

Ultrafast Thermal Shock Synthesis and Porosity Engineering of 3D Hierarchical Cu-Bi Nanofoam Electrodes for Highly Selective Electrochemical CO 2 Reduction

Controllable Microwave Heating for Energy‐Efficient and Universal Synthesis of Atomically Dispersed Metals on Nitrogen‐Doped Carbon Nanofibers

Rapid Laser Pulse Synthesis of Supported Metal Nanoclusters with Kinetically Tunable Size and Surface Density for Electrocatalytic Hydrogen Evolution

Continuous Fly-Through High-Temperature Synthesis of Nanocatalysts

Ultrafast Non‐Equilibrium Synthesis of Cathode Materials for Li‐Ion Batteries

A universal and ultrafast method for fabricating a library of nanocellulose-supported metal nanoparticles

Rapid Controllable Synthesis of Atomically Dispersed Co on Carbon under High Voltage Within One Minute.

High‐Temperature Shock Enabled Nanomanufacturing for Energy‐Related Applications

Ultrafast Nanomanufacturing Via High-Temperature Shock of La0.6Sr0.4CoO3 Catalysts for Overall Water Splitting

High‐Temperature Atomic Mixing Toward Well‐Dispersed Bimetallic Electrocatalysts

Rapid Atomic Ordering Transformation toward Intermetallic Nanoparticles

Carbothermal shock enabled functional nanomaterials for energy-related applications