Abstract:An efficient and ultrafast method to synthesize well-dispersed functional nanoparticles with controlled size and distribution remains largely unanswered. Conventional synthesis methods (wet chemistry, spray pyrolysis, among others) tend to be less controllable, leading to nanoparticle aggregation as well as a wide particle size distribution. Therefore, a short synthesis duration is critical to control nanoparticle size and minimize aggregation. Here we report a rapid and universal high temperature thermal shock method to form and uniformly disperse metallic nanoparticles on a conductive carbon support, such as carbon nanofibers (CNF). First, the desired metal salt precursor is homogeneously mixed into an aqueous solution and loaded onto the conductive carbon support. After drying, the precursor-loaded CNF film is attached to electrical leads inside an argon-filled glovebox to facilitate the electrically triggered Joule heating procedure. An applied electrical pulse from an external power source induces the thermal shock process by heating the precursor-loaded CNF to ~2000 K for mere milliseconds at ultrafast heating/cooling rates (~105 K/s). Due to the short high temperature exposure and rapid cooling rate, nearly any precursor metal salt can decompose and nucleate into uniformly distributed metallic nanoparticles with ultrafine particle sizes without damaging the conductive support. Note that kinetic control can also be achieved by tuning the synthesis parameters (pulse duration, heating temperature, heating/cooling rates). Specifically, as the pulse duration increases to seconds, the temporal limitations for diffusion and migration broaden, allowing nanoparticles with larger diameters to form with a wider particle size distribution. In the field of energy storage, nanoparticle-decorated conductive supports are ideal battery electrodes. To demonstrate the proposed manufacturing method, lithium-oxygen (Li-O2) batteries were successfully assembled and tested using the nanocatalyst-decorated CNF films. Bifunctional ruthenium nanoparticles were synthesized by the rapid thermal shock method to increase the electrocatalytic activity of the CNF-based Li-O2 cathodes and improve oxygen reaction kinetics. The results indicate the potential of this rapid manufacturing method to synthesize an array of non-agglomerated nanoparticle-decorated supports for energy storage devices and beyond.

Ultrafast Nanomanufacturing Via High-Temperature Shock of La0.6Sr0.4CoO3 Catalysts for Overall Water Splitting

Millisecond Synthesis of CoS Nanoparticles for Highly Efficient Overall Water Splitting

Microwave Shock Process for Rapid Synthesis of 2D Porous La0.2Sr0.8CoO3 Perovskite As an Efficient Oxygen Evolution Reaction Catalyst

Rapid Fabrication of Ni/NiO@CoFe Layered Double Hydroxide Hierarchical Nanostructures by Femtosecond Laser Ablation and Electrodeposition for Efficient Overall Water Splitting

Fast Synthesis of Low Ru Doped CoOx/CeO2 Nanosheet Arrays with Abundant Heterointerfaces for Highly Efficient Overall Water Splitting

Ultrafast Thermal Synthesis of Non-Noble Metal-Based Electrocatalysts for Overall Water Splitting

Ultrafast Carbothermal Shock Constructing Ni3Fe1-xCrx Intermetallic Integrated Electrodes for Efficient and Durable Overall Water Splitting

One-Dimensional La0.2Sr0.8Cu0.4Co0.6O3−δ Nanostructures for Efficient Oxygen Evolution Reaction

Carbothermal Shock Synthesis of High Entropy Oxide Catalysts: Dynamic Structural and Chemical Reconstruction Boosting the Catalytic Activity and Stability toward Oxygen Evolution Reaction

Phase and composition controlled synthesis of cobalt sulfide hollow nanospheres for electrocatalytic water splitting

An Interface Engineering Strategy of MoS2/perovskite Oxide As a Bifunctional Catalyst to Boost Overall Water Splitting

Efficient Electrocatalytic Overall Water Splitting of Porous 3D CoPt3/a-FCWO-NS Heterostructures: Morphology Modulation and Interfacial Engineering for the Formation of Crystalline-Amorphous Nanosheets

Fast synthesis of low Ru doped CoO x /CeO 2 nanosheet arrays with abundant heterointerfaces for highly efficient overall water splitting

Boost Electrocatalytic Activity of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ Air Electrode Prepared by High-Temperature Shock for Solid Oxide Electrochemical Cells

Sodium Borohydride-Assisted Synthesis of Strontium Substituted Lanthanum Cobaltate with In-Situ Generated Cobaltosic Oxide: Towards Enhanced Oxygen Evolution Reaction in Alkaline Media.

Atmospheric-Temperature Chain Reaction Towards Ultrathin Non-Crystal-Phase Construction for Highly Efficient Water Splitting

Two-dimensional Cobalt Oxy-hydrate Sulfide Nanosheets with Modified T2g Orbital State of CoO6–x Octahedron for Efficient Overall Water Splitting

Turning the Surface Electronic Effect Over Core‐Shell CoS2─FexCo1‐xS2 Nanooctahedra Toward Electrochemical Water Splitting in the Alkaline Medium

Short Hydrogen Bonds on Reconstructed Nanocrystal Surface Enhance Oxygen Evolution Activity

High Temperature Thermal Shock Synthesis of Catalyst-Decorated Nanostructures for Energy Storage

3D hierarchical Co3O4@Co3S4 nanoarrays as anode and cathode materials for oxygen evolution reaction and hydrogen evolution reaction