Abstract:An efficient and ultrafast method to synthesize well-dispersed functional nanoparticles with controlled size and distribution remains largely unanswered. Conventional synthesis methods (wet chemistry, spray pyrolysis, among others) tend to be less controllable, leading to nanoparticle aggregation as well as a wide particle size distribution. Therefore, a short synthesis duration is critical to control nanoparticle size and minimize aggregation. Here we report a rapid and universal high temperature thermal shock method to form and uniformly disperse metallic nanoparticles on a conductive carbon support, such as carbon nanofibers (CNF). First, the desired metal salt precursor is homogeneously mixed into an aqueous solution and loaded onto the conductive carbon support. After drying, the precursor-loaded CNF film is attached to electrical leads inside an argon-filled glovebox to facilitate the electrically triggered Joule heating procedure. An applied electrical pulse from an external power source induces the thermal shock process by heating the precursor-loaded CNF to ~2000 K for mere milliseconds at ultrafast heating/cooling rates (~105 K/s). Due to the short high temperature exposure and rapid cooling rate, nearly any precursor metal salt can decompose and nucleate into uniformly distributed metallic nanoparticles with ultrafine particle sizes without damaging the conductive support. Note that kinetic control can also be achieved by tuning the synthesis parameters (pulse duration, heating temperature, heating/cooling rates). Specifically, as the pulse duration increases to seconds, the temporal limitations for diffusion and migration broaden, allowing nanoparticles with larger diameters to form with a wider particle size distribution. In the field of energy storage, nanoparticle-decorated conductive supports are ideal battery electrodes. To demonstrate the proposed manufacturing method, lithium-oxygen (Li-O2) batteries were successfully assembled and tested using the nanocatalyst-decorated CNF films. Bifunctional ruthenium nanoparticles were synthesized by the rapid thermal shock method to increase the electrocatalytic activity of the CNF-based Li-O2 cathodes and improve oxygen reaction kinetics. The results indicate the potential of this rapid manufacturing method to synthesize an array of non-agglomerated nanoparticle-decorated supports for energy storage devices and beyond.

Ultrafast Thermal Shock Synthesis and Porosity Engineering of 3D Hierarchical Cu-Bi Nanofoam Electrodes for Highly Selective Electrochemical CO 2 Reduction

Ultrafast Thermal Shock Synthesis and Porosity Engineering of 3D Hierarchical Cu-Bi Nanofoam Electrodes for Highly Selective Electrochemical CO2 Reduction.

Ultra-fast synthesis of three-dimensional Porous Cu/Zn Heterostructures for Enhanced Carbon Dioxide Electroreduction

High Temperature Thermal Shock Synthesis of Catalyst-Decorated Nanostructures for Energy Storage

Ultrafast fabrication of porous transition metal foams for efficient electrocatalytic water splitting

Electronic and Geometric Structure Engineering of Bicontinuous Porous Ag–Cu Nanoarchitectures for Realizing Selectivity-Tunable Electrochemical CO2 Reduction

Synthesis of 2H/fcc-Heterophase AuCu Nanostructures for Highly Efficient Electrochemical CO2 Reduction at Industrial Current Densities

Microfluidics-Assisted Synthesis of Hierarchical Cu2 O Nanocrystal as C2 -Selective CO2 Reduction Electrocatalyst

In-situ Grown CuO X Nanowire Forest on Copper Foam: A 3D Hierarchical and Freestanding Electrocatalyst with Enhanced Carbonaceous Product Selectivity in CO 2 Reduction

Enhanced CO Selectivity and Stability for Electrocatalytic Reduction of CO 2 on Electrodeposited Nanostructured Porous Ag Electrode

In-situ grown CuOx nanowire forest on copper foam: A 3D hierarchical and freestanding electrocatalyst with enhanced carbonaceous product selectivity in CO2 reduction

Transient and general synthesis of high-density and ultrasmall nanoparticles on two-dimensional porous carbon via coordinated carbothermal shock

Hierarchical Superhydrophilic/Superaerophobic 3D Porous Trimetallic (Fe, Co, Ni) Spinel/Carbon/Nickel Foam for Boosting Oxygen Evolution Reaction

Nanostructured CuO/C Hollow Shell@3D Copper Dendrites As a Highly Efficient Electrocatalyst for Oxygen Evolution Reaction

Rapid Synthesis of Porous Pt-Ni-Cu Coatings with a Wide Composition Range, Tunable Structures and Enhanced Electrocatalytic Properties

Rapid and Controllable In-Situ Self-Assembly of Main-Group Metal Nanofilms for Highly Efficient Co2 Electroreduction to Liquid Fuel in Flow Cells

MOF-Mediated Fabrication of Porous 3-D Superstructure of Carbon Nanosheets Decorated with Ultrafine Cobalt Phosphide Nanoparticles for Efficient Electrocatalysis.

Ultrafast Carbothermal Shock Strategy Enabled Highly Graphitic Porous Carbon Supports for Fuel Cells

Hierarchical Cuco2s4 Nanoarrays For High-Efficient And Durable Water Oxidation Electrocatalysis

Ultrafast Synthesis of Efficient TS-PtCoCu/CNTs Composite with High Feed-to-product Conversion Rate by Joule Heating for Electrocatalytic Oxidation of Ethanol

Atomic-level-designed copper atoms on hierarchically porous gold architectures for high-efficiency electrochemical CO 2 reduction