Abstract:Among many catalysts for the electrochemical reduction of CO2, bimetallic materials have been paid more attention on enhanced catalytic activity and product selectivity. Sn is considered as an optional catalyst with excellent application potential due to its high selectivity for formate, low toxicity, low cost, and abundant reserves, which has been widely studied in recent years. However, the catalytic properties of cobalt–tin bimetallic composites have not been reported. In this study, we successfully synthesized the loaded Co/Sn bimetallic carbon matrix composite using the MOF template method and systematically studied the characteristics of the composite for the electrochemical catalytic reduction of CO2. It was found that the formate Faraday efficiency (FEFormate) of the electrode with 1% Co/Sn@C catalyst coating could reach 70% with the total current density of ∼5.6 mA cm–2 at a low applied potential of −0.98 V vs RHE (reversible hydrogen electrode). Studies have shown that Co element mainly in the form of alloy doped into the catalytic materials, with trace amounts of Co doping (≤1%) can effectively improve electrode conductivity properties, increase the electrochemical active site, significantly improve selectivity for formate, and enhance the hydrogen evolution reaction (HER), which leads to more Co element doping playing a negative role. Further, the electrode with carbon paper as the support has more stable electrocatalytic activity, compared to copper foil. Experiments confirmed that the desorption of active metals on the catalyst coating on the electrode surface was the critical factor leading to the decrease in catalytic performance. This brings essential implications for the deactivation of electrodes coated with metallic elements, therefore enhancing the binding ability between the active components and the catalytic surface, or uniformly dispersing the catalytically active sites should be an effective way to improve this kind of electrode life. In addition, the carbon paper-supported 1% Co/Sn@C gas diffusion electrode (GDE) coupled with an alkaline flow cell achieved a remarkable FEFormate of ∼76% and a substantial formate partial current density of ∼24 mA cm–2 at an applied potential of −0.98 V vs RHE. Electrocatalytic experiments in the flow cell for 30 h demonstrated the excellent catalytic stability of the 1% Co/Sn@C GDE during long-term electrochemical activities.

Engineering Bimetallic Copper‐Tin Based Core‐Shell Alloy@Oxide Nanowire as Efficient Catalyst for Electrochemical CO 2 Reduction

Engineering Bimetallic Copper‐Tin Based Core‐Shell Alloy@Oxide Nanowire As Efficient Catalyst for Electrochemical CO2 Reduction

Superaerophilic copper nanowires for efficient and switchable CO 2 electroreduction.

Nanoporous Intermetallic Cu3Sn/Cu Hybrid Electrodes As Efficient Electrocatalysts for Carbon Dioxide Reduction

Nanoporous Intermetallic Cu 3 Sn/Cu Hybrid Electrodes as Efficient Electrocatalysts for Carbon Dioxide Reduction

CuCoOx/FeOOH Core–Shell Nanowires As an Efficient Bifunctional Oxygen Evolution and Reduction Catalyst

Ag-Sn Bimetallic Catalyst with A Core-Shell Structure for Co2 Reduction

Synergized Cu/Pb Core/Shell Electrocatalyst for High-Efficiency CO 2 Reduction to C 2+ Liquids

Oxidation State Modulation of Bimetallic Tin-Copper Oxide Nanotubes for Selective CO2 Electroreduction to Formate

Core-shell Co/CoNx@C Nanoparticles Enfolded by Co-N Doped Carbon Nanosheets As a Highly Efficient Electrocatalyst for Oxygen Reduction Reaction

Construction of cobalt-copper bimetallic oxide heterogeneous nanotubes for high-efficient and low-overpotential electrochemical CO2 reduction

Bimetallic Cu–Zn Catalysts for Electrochemical CO2 Reduction: Phase-Separated Versus Core–Shell Distribution

In Situ Engineering 3D Conductive Core-Shell Nano-Networks and Electronic Structure of Bismuth Alloy Nanosheets for Efficient Electrocatalytic CO2 Reduction

In Situ Reconstruction of Hierarchical Sn-Cu/SnOx Core/Shell Catalyst for High-Performance CO2 Electroreduction.

Highly Selective Palladium-Copper Bimetallic Electrocatalysts for the Electrochemical Reduction of CO2 to CO

Core–shell Nanoporous AuCu3@Au Monolithic Electrode for Efficient Electrochemical CO2 Reduction

Cobalt Doping in MOF-Derived Carbon-Loaded Tin Nanomaterials for Enhanced Electrocatalytic CO 2 Reduction

Fabrication of Bi/Sn bimetallic electrode for high-performance electrochemical reduction of carbon dioxide to formate

In Situ Formation of Cu–Sn Bimetallic Catalysts for CO2 Electroreduction to Formate with High Efficiency

A Hierarchically Structured Tin-Cobalt Composite with an Enhanced Electronic Effect for High-Performance CO 2 Electroreduction in a Wide Potential Range

Near-Unity Electrochemical CO2 to CO Conversion over Sn-Doped Copper Oxide Nanoparticles