Abstract:An efficient and ultrafast method to synthesize well-dispersed functional nanoparticles with controlled size and distribution remains largely unanswered. Conventional synthesis methods (wet chemistry, spray pyrolysis, among others) tend to be less controllable, leading to nanoparticle aggregation as well as a wide particle size distribution. Therefore, a short synthesis duration is critical to control nanoparticle size and minimize aggregation. Here we report a rapid and universal high temperature thermal shock method to form and uniformly disperse metallic nanoparticles on a conductive carbon support, such as carbon nanofibers (CNF). First, the desired metal salt precursor is homogeneously mixed into an aqueous solution and loaded onto the conductive carbon support. After drying, the precursor-loaded CNF film is attached to electrical leads inside an argon-filled glovebox to facilitate the electrically triggered Joule heating procedure. An applied electrical pulse from an external power source induces the thermal shock process by heating the precursor-loaded CNF to ~2000 K for mere milliseconds at ultrafast heating/cooling rates (~105 K/s). Due to the short high temperature exposure and rapid cooling rate, nearly any precursor metal salt can decompose and nucleate into uniformly distributed metallic nanoparticles with ultrafine particle sizes without damaging the conductive support. Note that kinetic control can also be achieved by tuning the synthesis parameters (pulse duration, heating temperature, heating/cooling rates). Specifically, as the pulse duration increases to seconds, the temporal limitations for diffusion and migration broaden, allowing nanoparticles with larger diameters to form with a wider particle size distribution. In the field of energy storage, nanoparticle-decorated conductive supports are ideal battery electrodes. To demonstrate the proposed manufacturing method, lithium-oxygen (Li-O2) batteries were successfully assembled and tested using the nanocatalyst-decorated CNF films. Bifunctional ruthenium nanoparticles were synthesized by the rapid thermal shock method to increase the electrocatalytic activity of the CNF-based Li-O2 cathodes and improve oxygen reaction kinetics. The results indicate the potential of this rapid manufacturing method to synthesize an array of non-agglomerated nanoparticle-decorated supports for energy storage devices and beyond.

Ultrafast Non‐Equilibrium Synthesis of Cathode Materials for Li‐Ion Batteries

Ultrafast Carbothermal Shock Synthesis of Wadsley–Roth Phase Niobium‐Based Oxides for Fast‐Charging Lithium‐Ion Batteries

An Ultrafast Synthesis Method of LiNi1/3Co1/3Mn1/3O2 Cathodes by Flash/field-Assisted Sintering

Ultrafast, in Situ Transformation of a Protective Layer on Lithium-Rich Manganese-Based Layered Oxides for High-Performance Li-ion Batteries

Direct observation of the ultrafast formation of cation-disordered rocksalt oxides as regenerable cathodes for lithium-ion batteries

Ultrafast Lattice Engineering for High Energy Density and High-Rate Sodium-Ion Layered Oxide Cathodes

Ultrafast Synthesis of Metal-Layered Hydroxides in a Dozen Seconds for High-Performance Aqueous Zn (Micro-) Battery

Ultrafast Non‐Equilibrium Phase Transition Induced Twin Boundaries of Spinel Lithium Manganate

A Layered/spinel Heterostructured Cathode for Li-ion Batteries Prepared by Ultrafast Joule Heating

Ultrafast High-Temperature Sintering of High-Entropy Oxides with Refined Microstructure and Superior Lithium-Ion Storage Performance

Accelerating the Phase Formation Kinetics of Alluaudite Sodium Iron Sulfate Cathodes via Ultrafast Thermal Shock

Approaching Ultimate Synthesis Reaction Rate of Ni-Rich Layered Cathodes for Lithium-Ion Batteries

A Review: Conventional and Supercritical Hydro/solvothermal Synthesis of Ultrafine Particles As Cathode in Lithium Battery

Rapid, in Situ Synthesis of High Capacity Battery Anodes Through High Temperature Radiation-Based Thermal Shock

High Temperature Thermal Shock Synthesis of Catalyst-Decorated Nanostructures for Energy Storage

Low Temperature and Rapid Synthesis of Li‐Rich Li(Li0.17Mn0.83)2O4 Spinel Cathodes Derived from Metal‐Organic Frameworks for Lithium‐Ion Batteries

In Situ Flash Synthesis of Ultra-High-Performance Metal Oxide Anode through Shunting Current-Based Electrothermal Shock

An Ultrasound-Triggered Cation Chelation and Reassembly Route to One-Dimensional Ni-rich Cathode Material Enabling Fast Charging and Stable Cycling of Li-ion Batteries

Low-temperature synthesis of a green material for lithium-ion batteries cathode

Rapid preparation of cobalt-free lithium rich cathode materials with layered structure and excellent performance via capillary microreactors

Rational Synthesis of High-Performance Ni-rich Layered Oxide Cathode Enabled Via Probing Solid-State Lithiation Evolution