Abstract:Layered Ni-rich compound LiNi0.5Co0.2Mn0.3O2 has drawn considerable attention recently because high Ni content contributes to the improvement of specific capacity and the reduction of cost. However, it is a challenge to obtain the Ni-rich LiNi0.5Co0.2Mn0.3O2 cathode with both high rate performance and high tap density because the rate capability is often improved at the expense of volumetric energy density, which is mostly dependent on the tap density. In our work, an uniform Ni-rich LiNi0.5Co0.2Mn0.3O2 microsphere with an average diameter of ca. 5 mu m and tap density of 2.1 g.cm(-3) was successfully prepared using carbonate co-precipitation method, which can meet the commercial requirement for lithium-ion batteries (tap density >= 2.1 g.cm(-3), Lithium Nickel Cobalt Manganese Oxides from CETC International Co., Ltd). In this synthetic route, the 2 mol.L-1 mixture of NiSO4.6H(2)O, MnSO4.H2O and CoSO4.7H(2)O (Ni: Co: Mn=5: 2: 3, molar ratio) are the starting materials, 2 mol.L-1 Na2CO3 and 4 mol.L-1 NH3.H2O are the precipitant and chelating agent, respectively. In order to achieve high tap density, the stirring speed of continuous stirred tank reactor (CSTR) is as high as 1500 r/min, and the powder was preheated at 550 degrees C for 6 h and then calcined at 850 degrees C for 14 h in flowing oxygen. Powder X-ray diffraction (XRD) and transmission electron microscopy (TEM) results indicate that the microsphere LiNi0.5Co0.2Mn0.3O2 material has a well-ordered alpha-NaFeO2 structure with stable in-plane [root 3 x root 3]R30 degrees ordering in the transition-metal layers. Electrochemical results also confirm that this cathode has excellent cycling stability and high rate capability. Specifically, it exhibits a discharge capacity of 150 mAh.g(-1) between 2.7 and 4.3 V at 1C after 100 cycles, with outstanding capacity retention of 94.6%. At 30C rate, it can still deliver a high discharge capacity of 96 mAh.g(-1). Meanwhile, the energy storage capacity for this cathode is also encouraging. At 0.1C rate, the specific energy ( Es) is 687.83 Wh.kg(-1) ( volumetric energy density is 1444.45 Wh.L-1 ); at 30C rate, the specific energy (E-s) is 335.27 Wh.kg(-1) (volumetric energy density is 704.07 Wh.L-)(-1). These excellent features will make this microsphere LiNi0.5Co0.2Mn0.3O2 material as a potential positive electrode material for commercial high energy density lithium- ion batteries.

Rapid preparation of cobalt-free lithium rich cathode materials with layered structure and excellent performance via capillary microreactors

Micromixer‐Assisted Co‐Precipitation Method for Fast Synthesis of Layered Ni‐Rich Materials for Lithium‐Ion Batteries

Hydrothermal-Assisted Synthesis of Li-Rich Layered Oxide Microspheres with High Capacity and Superior Rate-capability As a Cathode for Lithium-ion Batteries

Facile Synthesis of 0.6Li 2 MnO 3 -0.4LiNi 0.5 Mn 0.5 O 2 with Hierarchical Micro/Nanostructure and High Rate Capability as Cathode Material for Li-Ion Battery

Micron-sized monocrystalline LiNi1/3Co1/3Mn1/3O2 as high-volumetric-energy-density cathode for lithium-ion batteries

Ultrafast, in Situ Transformation of a Protective Layer on Lithium-Rich Manganese-Based Layered Oxides for High-Performance Li-ion Batteries

Electrochemically Modulated LiNi1/3Mn1/3Co1/3O2 Cathodes for Lithium-Ion Batteries

Simple Glycerol-Assisted and Morphology-Controllable Solvothermal Synthesis of Lithium-Ion Battery-Layered Li1.2Mn0.54Ni0.13Co0.13O2 Cathode Materials.

A simple and effective method to synthesize layered LiNi0.8Co0.1Mn0.1O2 cathode materials for lithium ion battery

Synthesis and Evaluation of Microspherical Li1.2Mn0.54Co0.13Ni0.13O2 Through Carbon Dioxides-assisted Co-precipitation Method for Lithium-ion Battery

Controllable preparation of one-dimensional Li1.2Mn0.54Ni0.13Co0.13O2 cathode materials for high-performance lithium-ion batteries

Li-Rich Layered Oxide Microspheres Prepared by the Biomineralization As High-Rate and Cycling-Stable Cathode for Li-Ion Batteries

Preparation And Electrochemical Performance Of High Rate Spherical Layered Lini (0.5) Co-0.2 Mn-0.3 O-2 Cathode Material For Lithium-Ion Batteries

Modification of Li-Rich Layer-Structured Cathode Materials by Supercritical Co2 Fluid

Synthesis of Nano Cubic Microstructure LiNi0.8Co0.1Mn0.1O2 Cathode Materials Via Rapid Precipitation Assisted with Hydrothermal Treatment

Enhanced Electrochemical Performance of Lithium-Rich Layered Oxide Cathodes by a Facile Self-Template Method for Lithium-Ion Batteries

Facile Synthesis of Li-rich Layered Oxides with Spinel-Structure Decoration As High-Rate Cathode for Lithium-Ion Batteries

Simple Glycerol-Assisted and Morphology-Controllable Solvothermal Synthesis of Lithium-Ion Battery-Layered Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 Cathode Materials

Preparation of layered Ni-rich LiNi0.9Co0.05Mn0.05O2 cathode materials with excellent electrochemical properties by controllable lithium supply and sintering

A Rapid Combustion Route to Synthesize High-Performance Nanocrystalline Cathode Materials for Li-ion Batteries

Large-scale Synthesis of Lithium- and Manganese-Rich Materials with Uniform Thin-Film Al 2 O 3 Coating for Stable Cathode Cycling