Abstract:Nickel-rich LiNi x Mn y Co 1−x−y O 2 (NMC, with x ≥ 0.6) layered oxides are regarded as cathode candidates for high-energy density lithium-ion batteries (LIBs). However, this technology faces several challenges due to the scarcity of crucial raw materials such as cobalt precursors and the negative environmental impact of their extraction process. It is therefore, it becomes imperative to develop low cobalt content cathode compositions that offer alternative options with comparable electrochemical performance. Herein, we have used a systematic approach to modify the composition while keeping all other properties (particle size and morphology) constant to synthesise low-Co-cathode materials, namely LiNi 0·8 Mn 0·1 Co 0·1 O 2 (NMC-10 %) and LiNi 0·8 Mn 0·15 Co 0·05 O 2 (NMC-5%). A co-precipitation route using a continuous stirred thank reactor was used for synthesis. The physico-chemical properties, electrochemical performances, cycling stability, and rate capabilities of NMC-5% materials are comparable to those of NCM-10 % materials. NMC-10 % and NMC-5% half cells show initial specific discharge capacities of 191 mAh.g −1 , and 185 mAh.g −1 , respectively, in a voltage range of 2.8–4.3 V ( vs. Li + /Li). The NMC-5% exhibits excellent thermal stability, characterized by a predominant exothermic peak at 432 °C and significantly lower total heat energy when compared to NMC-10 % counterpart, which displayed its main exothermic peak at 339 °C. The structural and electronic changes of both materials were evaluated through in operando synchrotron-based X-ray techniques. Regardless of the cobalt content, both materials show comparable structural and electronic evolution upon the de-intercalation/intercalation of Li + ions. An irreversible phase transition at the first delithiation was observed as emphasized by diffraction of synchrotron radiations.

Preparation of layered high nickel cobalt-free LiNi0.8Mn0.17Fe0.03O2 cathode material for lithium-ion batteries

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Investigation on performance of Li(Ni 0.5 Co 0.2 Mn 0.3 ) 1−x Ti x O 2 cathode materials for lithium-ion battery

Improving the Electrochemical Performance of Ultrahigh-Nickel-based Layered LiNi0.95Mn0.05O2 Cathode Through Cobalt Modification for Next-Generation High-Energy Li-ion Batteries

Improvement of stability and capacity of Co-free, Li-rich layered oxide Li1.2Ni0.2Mn0.6O2 cathode material through defect control

High-Performance Lithium-Rich Layered Oxide Material: Effects of Preparation Methods on Microstructure and Electrochemical Properties

Cobalt-free nickel-rich cathode materials based on Al/Mg co-doping of LiNiO2 for lithium ion battery

Design of a new Li-rich Mn-based ternary cathode material based on Ni, Co, and Mn action mechanism

(Invited) Delineating the Intricacies Involved in the Synthesis of Cobalt-Free High-Nickel Layered Oxide Cathodes for Lithium-Ion Batteries

Effect of Co/Mn content on electrochemical properties of Ni-rich LiNi0.9CoxMn0.1-xO2

A highly promising high-nickel low-cobalt lithium layered oxide cathode material for high-performance lithium-ion batteries

Cobalt-free nickel rich layered oxide cathodes for lithium-ion batteries.

Ni-Rich Layered Oxide with Preferred Orientation (110) Plane as a Stable Cathode Material for High-Energy Lithium-Ion Batteries

A New Ternary Co-Free Layered Cathode, Li[Ni1--Ti Al ]O2, for High-Energy Lithium-Ion Batteries

Facile Synthesis and Enhanced Electrochemical Performances of Li2tio3-Coated Lithium-Rich Layered Li1.13ni0.30mn0.57o2 Cathode Materials for Lithium-Ion Batteries

Methods for Promoting Electrochemical Properties of LiNi_(l/3) Co_(l/3) Mn_(l/3)O_2 for Lithium-Ion Batteries

Well-ordered Layered LiNi 0.8 Co 0.1 Mn 0.1 O 2 Submicron Sphere with Fast Electrochemical Kinetics for Cathodic Lithium Storage

Preparation and Electrochemical Properties of LiNi<sub>2/3</sub>Co<sub>1/6</sub>Mn<sub>1/6</sub>O<sub>2</sub> Cathode Material for Lithium-Ion Batteries

Enhancing the Storage Performance and Thermal Stability of Ni-Rich Layered Cathodes by Introducing Li2MnO3

Development and understanding of the lithiation/de-lithiation mechanism of a low cobalt and nickel-rich cathode material for lithium‐ion batteries

Fe Doped Li1.2Mn0.6-x/2Ni0.2-x/2FexO2 (x≤0.1) As Cathode Materials for Lithium-Ion Batteries