Abstract:Because of their beautiful appearance, strong crossing ability, and reasonable stress performance, the application of tied steel box arch bridges is becoming more and more extensive. Bridge construction monitoring can control and adjust the deviation state to ensure the stress and linear state of the bridge after completion. This study carried out a symmetrical construction monitoring analysis and completed state evaluation of the newly built Dafeng River Bridge in Guangxi Province based on the finite element method. MIDAS Civil finite element software is used for simulation analysis to calculate the deformation and stress of the tied steel box arch bridge at the construction and completion stages. The tensile and compressive stress of the main arch and transverse brace, as well as the cumulative displacements of the main arch and lattice beam, are symmetrically distributed. The maximum tensile and compressive stresses are 15.1 MPa and 74.6 MPa, respectively, less than the specification's allowable value. Meanwhile, for the completed bridge under the loading combinations of serviceability limit state and bearing capacity ultimate limit state, the stress of the main arch, transverse brace, and lattice beam meets the specification requirements. The maximum cable forces of the suspender and tie rod under the bearing capacity ultimate limit state are 2189.4 kN and 2991.2 kN, and their corresponding minimum safety factors are 3.2 and 2.7. In addition, the deviations between the on-site monitoring and the finite element theoretical values are within the specification allowable range for the cable force of the suspender and tie rod and the bridge deck alignment. It indicates that the bridge construction monitoring effect is reasonable and ideal, and the symmetrically finite element simulation analysis can provide a theoretical basis for construction monitoring.

Construction Monitoring and Control for Jiaomen River Arch Bridge in Guangzhou

Symmetrically Construction Monitoring Analysis and Completed State Evaluation of a Tied Steel Box Arch Bridge Based on Finite Element Method

Construction Control of Hoisting and Installation of Arch Rib of a Half-Through CFST Stiff Skeleton Arch Bridge

Stress Performance Analysis of Special-shaped Arch Bridge with Longitudinal Linkage

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

Integral Lifting Construction and Monitoring of Qifeng Bridge in Huzhou City

Multi-rib Arch Bridge Strengthened by Stayed-Cable and Field Test

Key Construction Technology and Monitoring of Long-Span Steel Box Tied Arch Bridge

CONSTRUCTION VERIFICATION OF UNDER-BEARING ARCH BRIDGE BASED ON CONSTRUCTION MONITORING AND TEST

Stress Analysis of Arch Rib of Jianhu Arch Bridge on Monitoring

Research into the Technique of Construction Monitoring for a Rigid-Frame and Cable-Stayed Composite Bridge

In-situ assembling construction orientation technologies for extroversive and unsymmetrical steel arch bridges

Monitoring and control of steel truss arch bridge jacking construction

Reinforced Concrete Multi-Rib Arch Bridge Strengthened by Changing Structural System

Construction Monitoring and Control of PC Composite Box-girder with Corrugated Steel Webs

Construction Monitoring of Dukeng Bridge

Construction Monitoring and Control of Liuxihe Bridge

Closure Construction Monitoring Technology of the Super Long-span Steel Tied-arch Truss Bridge

Structural health monitoring system for special-shaped concrete-filled steel tubular arch bridge

Arch Rib Vertical Loading Control and Measure Techniques of Nanning Bridge

Stress Measurement and Analysis in Overall Incremental Launching Construction of Beam-arch Composite Arch Bridge