Abstract:Because of their beautiful appearance, strong crossing ability, and reasonable stress performance, the application of tied steel box arch bridges is becoming more and more extensive. Bridge construction monitoring can control and adjust the deviation state to ensure the stress and linear state of the bridge after completion. This study carried out a symmetrical construction monitoring analysis and completed state evaluation of the newly built Dafeng River Bridge in Guangxi Province based on the finite element method. MIDAS Civil finite element software is used for simulation analysis to calculate the deformation and stress of the tied steel box arch bridge at the construction and completion stages. The tensile and compressive stress of the main arch and transverse brace, as well as the cumulative displacements of the main arch and lattice beam, are symmetrically distributed. The maximum tensile and compressive stresses are 15.1 MPa and 74.6 MPa, respectively, less than the specification's allowable value. Meanwhile, for the completed bridge under the loading combinations of serviceability limit state and bearing capacity ultimate limit state, the stress of the main arch, transverse brace, and lattice beam meets the specification requirements. The maximum cable forces of the suspender and tie rod under the bearing capacity ultimate limit state are 2189.4 kN and 2991.2 kN, and their corresponding minimum safety factors are 3.2 and 2.7. In addition, the deviations between the on-site monitoring and the finite element theoretical values are within the specification allowable range for the cable force of the suspender and tie rod and the bridge deck alignment. It indicates that the bridge construction monitoring effect is reasonable and ideal, and the symmetrically finite element simulation analysis can provide a theoretical basis for construction monitoring.

Stress Measurement and Analysis in Overall Incremental Launching Construction of Beam-arch Composite Arch Bridge

Fatigue Performance Assessment of Composite Arch Bridge Suspenders Based on Actual Vehicle Loads

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

Safety Control Research of Steel U Girder of Composite Bridge with Incremental Launching Construction

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Evaluation of Long Multi-Span Steel U-Shaped Girder During Incremental Launching Construction

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Simulation analysis and control research of long multi-span composite bridge with incremental launching construction

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

FINITE ELEMENT SIMULATION ANALYSIS OF STEEL TRUSS ARCH BRIDGE JACKING CONSTRUCTION

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Stress Performance Analysis of Special-shaped Arch Bridge with Longitudinal Linkage

Research on the key technology of TIED-arch bridge Incremental Launching Method Construction

The Incremental Launching Construction Technology of Pontoon Pivot Conversion of Large-span Steel Arch Bridge

Symmetrically Construction Monitoring Analysis and Completed State Evaluation of a Tied Steel Box Arch Bridge Based on Finite Element Method

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Model Test on Incremental Launching Construction Method for JIUBAO Bridge in Hangzhou

Monitoring and control of steel truss arch bridge jacking construction

Stress and deformation analysis of the steel pipe arch integral lifting construction process of a continuous beam arch bridge

Incremental Launching Construction of a Long Span Bridge with Continuous Steel Truss Girder and Flexible Arch