Abstract:Because of their beautiful appearance, strong crossing ability, and reasonable stress performance, the application of tied steel box arch bridges is becoming more and more extensive. Bridge construction monitoring can control and adjust the deviation state to ensure the stress and linear state of the bridge after completion. This study carried out a symmetrical construction monitoring analysis and completed state evaluation of the newly built Dafeng River Bridge in Guangxi Province based on the finite element method. MIDAS Civil finite element software is used for simulation analysis to calculate the deformation and stress of the tied steel box arch bridge at the construction and completion stages. The tensile and compressive stress of the main arch and transverse brace, as well as the cumulative displacements of the main arch and lattice beam, are symmetrically distributed. The maximum tensile and compressive stresses are 15.1 MPa and 74.6 MPa, respectively, less than the specification's allowable value. Meanwhile, for the completed bridge under the loading combinations of serviceability limit state and bearing capacity ultimate limit state, the stress of the main arch, transverse brace, and lattice beam meets the specification requirements. The maximum cable forces of the suspender and tie rod under the bearing capacity ultimate limit state are 2189.4 kN and 2991.2 kN, and their corresponding minimum safety factors are 3.2 and 2.7. In addition, the deviations between the on-site monitoring and the finite element theoretical values are within the specification allowable range for the cable force of the suspender and tie rod and the bridge deck alignment. It indicates that the bridge construction monitoring effect is reasonable and ideal, and the symmetrically finite element simulation analysis can provide a theoretical basis for construction monitoring.

Research into the Technique of Construction Monitoring for a Rigid-Frame and Cable-Stayed Composite Bridge

Sensor Placement of Long-Term Health Monitoring for Large Bridges Based on the Real-Time Correction of Finite Element Model

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Construction and Construction Monitoring Techniques for Thin-Walled V-Shape Piers

Construction monitoring of the steel structure for Hangzhou East Railway Station Building

Study on Health Monitoring System Design of Cable-Stayed Bridge

Research on monitoring and control for suspender cable tension of half-through concrete filled steel tube arch bridge

Analysis of the Existing Reinforced Concrete Rigid Frame Arch Bridge Strengthened with Arch and Cable System

Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

Health monitoring system of steel-tube arch bridge : design and implementation of a teaching demonstration platform

Symmetrically Construction Monitoring Analysis and Completed State Evaluation of a Tied Steel Box Arch Bridge Based on Finite Element Method

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

SIMULATION FOR CONSTRUCTION PROCESS OF P.C. CONTINUOUS RIGID FRAME BRIDGE

Monitoring and Control for Large Span Cable-stayed Bridge

Methodology of Long-Term Real-Time Condition Assessment for Existing Cable-Stayed Bridges

Key Construction Technology and Monitoring of Long-Span Steel Box Tied Arch Bridge

IMITATING RESEARCH OF CONTROL OVER CONSTRUCTION OF CONTINUOUS RIGID FRAME BRIDGE

CONSTRUCTION VERIFICATION OF UNDER-BEARING ARCH BRIDGE BASED ON CONSTRUCTION MONITORING AND TEST

Closure Construction Monitoring Technology of the Super Long-span Steel Tied-arch Truss Bridge

Technetium(I) carbonyl dithiocarbamates and xanthates.

Innovative Design of a Health Monitoring System and Its Implementation in a Complicated Long-Span Arch Bridge