Abstract:In the present work, a novel and facile process has been proposed to fabricate porous Si2N2O-Si3N4 multiphase ceramics with low dielectric constant (εr＜4.0). Since silica poly-hollow microspheres could serve as the source of SiO2 and the pore-forming agent, they have been introduced into Si3N4 slurry through the gelcasting technique. This process is benefited from the liquid phase sintering reaction between SiO2 and Si3N4 with the aid of sintering additives, leading to in-situ synthesis of Si2N2O phase and porous structure. The content of silica poly-hollow microspheres has great influence on the properties of the final products. It indicates that Si2N2O phase would become the major phase when the content of silica poly-hollow microspheres was above 25wt%. Furthermore, the micromorphology results reveal that the content of pores with many smaller aggregate microspheres increases as microspheres amount rises. As a result, along with the addition of silica poly-hollow microspheres, the bulk density decreases to 1.32±0.01g/cm3, and open porosity ranges from 28.4±0.4% to 52.0±0.5%. Porous Si2N2O-Si3N4 multiphase ceramics prepared with 25wt% silica poly-hollow microspheres addition possess flexural strength of 42.3±3.8MPa, low dielectric constant of 3.31 and loss tangent of 1.93×10−3. It turns out to be an effective method to fabricate porous Si2N2O-Si3N4 composites with excellent mechanical and dielectric properties, which could be applied to radome materials.

Numerical and Experimental Studies of the Pore Size Impacts on Dielectric and Mechanical Properties for Porous Si <sub>3</sub>N <sub>4</sub> for Radome Application

A comparative study on dielectric and mechanical properties of porous β-Si3N4 ceramics by controlling porosity and microstructure

Effects of pore structures on the dielectric properties of silicon nitride-based ceramics

Microstructure, Mechanical and Dielectric Properties of Highly Porous Silicon Nitride Ceramics Produced by a New Water-Based Freeze Casting

Effects of Pore Morphology on the Fabrication and Mechanical Properties of Porous Si<sub>3</sub>N<sub>4</sub> Ceramics

Mechanical and Dielectric Properties of Porous Si3N4–SiC(BN) Ceramic

Effect Of Porosity On Mechanical And Dielectric Properties Of 20%Bn/Si3n4 Composite Porous Ceramics

Effects of Pore Morphology on the Fabrication and Mechanical Properties of Porous Si3N4 Ceramics

Porous Si3N4-based Ceramics with Uniform Pore Structure Originated from Single-Shell Hollow Microspheres

Mechanical and Dielectric Properties of Porous Si3n4-Sio2 Composite Ceramics

Porosity effect on the functional properties and energy harvesting performance of Ba0.85Ca0.15Ti0.90Zr0.10O3 ceramics

Study on Microstructure and Mechanical Properties of Porous Si<sub>3</sub>N<sub>4</sub> Ceramics

Dielectric and mechanical properties of porous Si 3N 4-BN ceramic composites

High Performance Porous Wave-Transmitting Silicon Nitride Ceramics by Gel-Casting Technique

Dielectric and Mechanical Properties of Porous Si3N4-BN Ceramic Composites

In-situ Reaction Synthesis of Porous Si2N2O-Si3N4 Multiphase Ceramics with Low Dielectric Constant Via Silica Poly-Hollow Microspheres

Fabrication And Properties Of Porous Si3n4-Sio2 Ceramics With Dense Surface And Gradient Pore Distribution

The lamellar preparation of continuous porosity-graded Si3N4 ceramics without obvious interfaces for broadband radome application

Effect of Si<sub>3</sub>N<sub>4</sub> Nanowires on the Mechanical Properties and Dielectric Constant of Porous Si<sub>3</sub>N<sub>4</sub> Ceramics

Increased microwave absorption property of porous Si3N4 ceramics by loading polymer-derived SiCN for a multifunctional design

Numerical and Experimental Studies of the Pore Size Impacts on Dielectric and Mechanical Properties for Porous Si &lt;sub&gt;3&lt;/sub&gt;N &lt;sub&gt;4&lt;/sub&gt; for Radome Application