Abstract:Conventional rolled Mg-Al alloy sheets typically exhibit strong basal textures that remain and may even strengthen after recrystallization annealing due to the preferential growth of basal-oriented grains, resulting in poor formability at room temperature. Therefore, the knowledge of recrystallization and grain growth is critical for modifying textures of Mg-Al alloy sheets. The static recrystallization and texture evolution in a cold-rolled dilute Mg-1Al (wt.%) alloy during various annealed temperatures ranging from 300 °C to 450 °C, have been investigated using the quasi in-situ electron backscatter diffraction (EBSD) method. The as-rolled Mg-1Al alloy shows a dominant basal texture, which weakens and broadens in the rolling direction (RD) during the subsequent annealing, accompanied by the formation of 〈101¯0〉 texture component. Particularly, the 〈101¯0〉 texture component is more pronounced after annealing at high temperatures. The quasi in-situ EBSD results show that recrystallized grains are mainly induced by shear bands, which exhibit a wide spectrum of orientations with c-axis tilt angles ranging 20°-45° from the normal direction (ND). Orientations of shear band-induced recrystallized grains are retained during the entire recrystallization process, resulting in a reduction in the texture intensity. Moreover, recrystallized grains belonging to the 〈101¯0〉 texture component grow preferentially compared to those with other orientations, which is attributed to low energy grain boundaries, especially grain boundaries with ∼30° misorientation angles. Furthermore, the high temperature annealing facilitates the rapid growth of grain boundaries having a 30° misorientation angle, leading to the occurrence of distinct 〈101¯0〉 texture after annealing at 450 °C for 1 h. The results provide insights for texture modification of rare earth-free low-alloyed Mg alloys by controlling annealing parameters.

Quasi-in-situ EBSD Study of the Microstructure and Texture Evolution During Static Recrystallization in an Extruded Mg-Mn-Ce Alloy

Quasi-in-situ Observing the Rare Earth Texture Evolution in an Extruded Mg-Zn-Gd Alloy with Bimodal Microstructure

Texture Evolution During Static Recrystallization of Cold-Rolled Magnesium Alloys

Unexpected texture transition induced by grain growth during static annealing of a dilute Mg-1Al alloy

In-situ observations of static recrystallization and texture formation in a cold-rolled CoCrFeMnNi high entropy alloy

Effects of Extrusion Temperature on Texture Evolution in Mg-1Gd Alloy

On the role of selective nucleation and growth to recrystallization texture development in a Mg-Gd-Zn alloy

Microstructural and texture evolution investigation of laser melting deposited TA15 alloy at 500?C using in-situ EBSD tensile test

In Situ Electron Backscatter Diff Raction Analysis for Microstructure Evolution and Deformation Models of Mg–Ce Alloy During Uniaxial Loading

The Preferential Growth and Related Textural Evolution During Static Recrystallization in a Cold-Rolled Mg–Zn–Gd Alloy

Grain Growth and Texture Evolution During Annealing in an Indirect-Extruded Mg–1Gd Alloy

Study on the Evolution Pattern of Grain Orientation and Misorientation During the Static Recrystallization of Cold-Rolled Mg-Zn-Gd Alloy

Texture Evolution During Dynamic Recrystallization in a Magnesium Alloy at 450 °C

Texture Selection Mechanisms During Recrystallization and Grain Growth of a Magnesium-Erbium-Zinc Alloy

An In-Situ Study of Static Recrystallization in Mg Using High Temperature EBSD

Quasi-in-situ observations of microstructural evolution during cyclic deformation of a Mg-Zn-Ca alloy

Correlation Between Dynamic Recrystallization and Formation of Rare Earth Texture in a Mg-Zn-Gd Magnesium Alloy During Extrusion

Quasi-in-situ Observing Unusual Grain Orientation Rotation During the Process of Static Recrystallization Grain Growth in Mg-Zn-Gd Alloy

Non-Basal Slip Induced Rare Earth Texture Evolution in Mg-14Gd-0.5Zr (wt.%) Alloy During the Traditional Hot Rolling

On the Origin of Non-Basal Texture in Extruded Mg-RE Alloys and Its Implication for Texture Engineering

Grain refinement and weak-textured structures based on the dynamic recrystallization of Mg-9.80Gd-3.78Y-1.12Sm-0.48Zr alloy