Abstract:Conventional rolled Mg-Al alloy sheets typically exhibit strong basal textures that remain and may even strengthen after recrystallization annealing due to the preferential growth of basal-oriented grains, resulting in poor formability at room temperature. Therefore, the knowledge of recrystallization and grain growth is critical for modifying textures of Mg-Al alloy sheets. The static recrystallization and texture evolution in a cold-rolled dilute Mg-1Al (wt.%) alloy during various annealed temperatures ranging from 300 °C to 450 °C, have been investigated using the quasi in-situ electron backscatter diffraction (EBSD) method. The as-rolled Mg-1Al alloy shows a dominant basal texture, which weakens and broadens in the rolling direction (RD) during the subsequent annealing, accompanied by the formation of 〈101¯0〉 texture component. Particularly, the 〈101¯0〉 texture component is more pronounced after annealing at high temperatures. The quasi in-situ EBSD results show that recrystallized grains are mainly induced by shear bands, which exhibit a wide spectrum of orientations with c-axis tilt angles ranging 20°-45° from the normal direction (ND). Orientations of shear band-induced recrystallized grains are retained during the entire recrystallization process, resulting in a reduction in the texture intensity. Moreover, recrystallized grains belonging to the 〈101¯0〉 texture component grow preferentially compared to those with other orientations, which is attributed to low energy grain boundaries, especially grain boundaries with ∼30° misorientation angles. Furthermore, the high temperature annealing facilitates the rapid growth of grain boundaries having a 30° misorientation angle, leading to the occurrence of distinct 〈101¯0〉 texture after annealing at 450 °C for 1 h. The results provide insights for texture modification of rare earth-free low-alloyed Mg alloys by controlling annealing parameters.

Non-Basal Slip Induced Rare Earth Texture Evolution in Mg-14Gd-0.5Zr (wt.%) Alloy During the Traditional Hot Rolling

Quasi-in-situ Observing the Rare Earth Texture Evolution in an Extruded Mg-Zn-Gd Alloy with Bimodal Microstructure

On the Origin of Non-Basal Texture in Extruded Mg-RE Alloys and Its Implication for Texture Engineering

Understanding the mechanisms of texture evolution in an Mg-2Zn-1Ca alloy during cold rolling and annealing

Texture Evolution, Deformation Mechanism and Mechanical Properties of the Hot Rolled Mg-Gd-Y-Zn-Zr Alloy Containing LPSO Phase

Correlation Between Dynamic Recrystallization and Formation of Rare Earth Texture in a Mg-Zn-Gd Magnesium Alloy During Extrusion

Unexpected texture transition induced by grain growth during static annealing of a dilute Mg-1Al alloy

Insights into the evolution of texture and mechanical properties during warm rolling and annealing of Mg–2Zn-0.5Ca alloy

Microstructure and Texture Evolution of Hot-Rolled Mg-3Gd Alloy During Recrystallization

Slip Behavior and Its Effect on Rolling Texture Development in a Dual-Phase Mg–Li Alloy

Uncovering of the Formation of Rare Earth Texture and Pseudo Fiber Bimodal Microstructure in the High Ductility Mg-2Gd-0.4Zr Alloy During Extrusion

Texture Selection Mechanisms During Recrystallization and Grain Growth of a Magnesium-Erbium-Zinc Alloy

Formation of Unusual Rolling Texture in a Mg-Al-Mn Alloy Sheet by Large-Strain Hot-Rolling

Slip-induced Texture Evolution of Rolled Mg–6Al–3Sn Alloy During Uniaxial Tension along Rolling and Transverse Directions

Microstructure and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy Plates with Different Initial Textures after Hot Rolling

On the Texture Memory Effect of a Cross-Rolled Mg-2Zn-2Gd Plate after Unidirectional Rolling

Improving the Isotropy and Formability of Extruded Mg-2Gd-1Zn (wt.%) Alloy Sheet by Introducing an Ellipse Texture

Study on the Evolution Pattern of Grain Orientation and Misorientation During the Static Recrystallization of Cold-Rolled Mg-Zn-Gd Alloy

Microstructure, texture evolution and mechanical anisotropy of Mg-Gd-Y-Zn-Zr alloy sheets produced by unidirectional and cross rolling

Analysis of Abnormal Texture and Strengthening Mechanisms of Extruded Mg–Gd–Y–Nd–Zr Alloy

Texture Evolution and Dynamic Recrystallization of Zr–1Sn–0.3Nb–0.3Fe–0.1Cr Alloy During Hot Rolling