Abstract:To drive the advancement of cost-effective deformed magnesium alloys, a high-strength Mg-3Zn-1.2Ca-0.5Mn (wt%) alloy with moderate ductility is successfully manufactured by employing low-temperature extrusion and warm rolling techniques. The influence of extrusion-rolling (E+R) on the microstructure, texture and mechanical properties of Mg-3Zn-1.2Ca-0.5Mn alloy has been investigated through employing microstructure characterization techniques and mechanical property experiments. Experimental finding indicates that a tensile yield strength (TYS) of extruded Mg-3Zn-1.2Ca-0.5Mn alloy is 180 MPa. Subsequent warm-rolling further enhances the TYS of the extruded Mg-3Zn-1.2Ca-0.5Mn alloy, soaring it from 180 to 349 MPa. Through the rolling process, a substantial proportion of low angle grain boundaries (LAGBs) and twin boundaries are generated within the grain structure. With the obstruction of grain boundary migration by LABGs, the fragmentation of grains during rolling and twinning boundaries, the grain size is significantly reduced from 2.98 μm in extrusion to 1.53 μm in rolling. At the same time, the nanoparticles are identified as Ca 2 Mg 6 Zn 3 , MgZn 2 , Mg 4 Zn 7 , and α-Mn with the shape of rod and spherical, which hinder the migration of LAGBs and maintain the stability of LAGBs. Additionally, the rolled alloy also shows a typical strong basal texture, characterized by the alignment of the (0001) plane parallel to the rolling surface and the orientation of the direction parallel to rolling direction (RD). The high strength in E+R Mg-3Zn-1.2Ca-0.5Mn alloy is mainly ascribed to the comprehensive effect resulting from a high fraction of LAGBs and a strong texture. Graphical

Abnormal Texture Development in Magnesium Alloy Mg–3Al–1Zn During Large Strain Electroplastic Rolling: Effect of Pulsed Electric Current

Microstructure and Texture Evolution of Mg-3Zn-1Al Magnesium Alloy During Large-Strain Electroplastic Rolling

Enhanced Rollability of Mg-3al-1zn Alloy by Pulsed Electric Current: A Comparative Study

Effect of Current Frequency on the Mechanical Properties, Microstructure and Texture Evolution in AZ31 Magnesium Alloy Strips During Electroplastic Rolling

Texture Modification of Magnesium Alloys During Electropulse Treatment

Athermal influence of pulsed electric current on the twinning behavior of Mg-3Al-1Zn alloy during rolling

Microstructure and Texture Evolution of Magnesium Alloys During Electropulse Treatment

Microstructure and texture evolution of cold-rolled Mg-3Al-1Zn alloy by electropulse treatment stimulating recrystallization

Texture Evolution in Cold-Rolled AZ31 Magnesium Alloy During Electropulsing Treatment

Toward deformability enhancement of rare earth magnesium alloy by pulsed current

Deformation mechanisms and recrystallization behavior of Mg-3Al-1Zn and Mg-1Gd alloys deformed by electroplastic-asymmetric rolling

Non-Basal Slip Induced Rare Earth Texture Evolution in Mg-14Gd-0.5Zr (wt.%) Alloy During the Traditional Hot Rolling

Effect of electric pulse rolling on plastic forming ability of AZ91D magnesium alloy

Effect of texture types on microstructure evolution and mechanical properties of AZ31 magnesium alloy undergoing uniaxial tension deformation at room temperature

Enhanced rollability of Mg alloys by directly activated { 10 1 ̄ 2 } twinning during asymmetric rolling: Experiments and finite element analysis

Microstructure, Mechanical Properties and Texture Evolution of Mg–Al–Zn–La–Gd–Y Magnesium Alloy by Hot Extrusion and Multi-Pass Rolling

Mg–3Al–1Zn alloy strips processed by electroplastic differential speed rolling

Insights into the evolution of texture and mechanical properties during warm rolling and annealing of Mg–2Zn-0.5Ca alloy

Dynamic Electropulsing Induced Evolution of Basal Texture and Its Effect on Properties of Magnesium Alloy Az61

Effect of Dual Deformation Processes on the Microstructure and Mechanical Properties of Low-Alloyed Mg-Zn-Ca-Mn Alloy

Dynamic Recrystallization and Texture Evolution of Mg–Y–Zn Alloy During Hot Extrusion Process