Abstract:Dramatic growth of lithium (Li) dendrite and structural deterioration of LiCoO2 (LCO) lead to rapid failure of a high-voltage Li∥LCO battery. The nitrile group (−C≡N) is beneficial to maintain the integrity of the LCO lattice due to its strong affiliation to Co ions, whereas the −C≡N bond is incompatible with the Li metal anode, leading to form a deleterious solid electrolyte interphase (SEI) film. Herein, a dual-functional electrolyte additive potassium selenocyanate (KSeCN) is introduced to construct stable and dense SEI/cathode electrolyte interphase (CEI) films by synergistic effects with −Se and −C≡N groups, resulting in uniform Li deposition and a stabilized LCO lattice during cycling. With a trace amount of KSeCN (0.1 wt %) in conventional carbonated electrolyte, the Li∥LCO battery exhibits promoted cycling performance at high charge cutoff 4.6 V. This work provides a strategic guidance for rational design of electrolyte to construct stable SEI and CEI films, to achieve a high-energy-density Li∥LCO battery with great performance.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsenergylett.2c00316.Experimental details, comparison of adsorption energies, optical photos and SEM images of deposited Li, XPS spectra of Li metal anodes, CE of Li deposition/stripping, energy density, CIE, and average charge/discharge voltages of Li∥LCO batteries, dQ/dV curves, charge/discharge curves, SEM images of cycled LCO, GITT results, comparison of discharge midpoint voltage, chronoamperometry (floating charge) test, element contents in CEI layer, XRD patterns and STEM images of cycled LCO, fitted EIS data, high-temperature electrochemical performance (PDF)This article has not yet been cited by other publications.

Tuning Interphase Chemistry to Stabilize High-Voltage LiCoO<sub>2</sub> Cathode Material via Spinel Coating

A compact interphase involving reversible redox couple stabilizes 4.6 V LiCoO2 cathode

Electron Energy Levels Determining Cathode Electrolyte Interphase Formation

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO<sub>2</sub> at 4.65 V

Tuning Surface Reconfiguration for Durable Cathode/Electrolyte Interphase of LiCoO<sub>2</sub> at 45 °C

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO2 at 4.65 V

Tuning Surface Reconfiguration for Durable Cathode/Electrolyte Interphase of LiCoO2 at 45 °C

Surface-interspersed nanoparticles induced cathode-electrolyte interphase enabling stable cycling of high-voltage LiCoO 2

Interfacial Design for a 4.6 V High‐Voltage Single‐Crystalline LiCoO2 Cathode

Channelization of cathode/electrolyte interphase to enhance the rate-capability of LiCoO2

<i>In</i><i>-situ</i> constructed protective bilayer enabling stable cycling of LiCoO<sub>2</sub> cathode at high-voltage

In-Situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO 2 Cathode at High-Voltage

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

In-situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO2 Cathode at High-Voltage

Synergistical Stabilization of Li Metal Anodes and LiCoO 2 Cathodes in High-Voltage Li∥LiCoO 2 Batteries by Potassium Selenocyanate (KSeCN) Additive

Tuning Surface Chemistry to Reduce the Step-Like Degradation of LiCoO2 at 4.6 V

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Tuning surface chemistry to reduce the step-like degradation of LiCoO<sub>2</sub> at 4.6 V

Designing In-Situ-Formed Interphases Enables Highly Reversible Cobalt-Free LiNiO2 Cathode for Li-ion and Li-metal Batteries

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathode

Ultra-thin and Mechanically Stable LiCoO2-Electrolyte Interphase Enabled by Mg2+ Involved Electrolyte